Hi Vaping Underground members, In this mini review i take a look at the Soulmate RDTA Pod for Drag S/X from VXV. The VXV Soulmate RDTA Pod for Drag S/X was supplied for the purpose of this review by Ella from Sourcemore.
https://www.sourcemore.com/vxv-soulmate-...g-s-x.html
Introduction
VXV are known for producing a couple of RDA'a and RTA's that are about the best value for money atties available with only Oumier coming close in that regard. More recently VXV have took advantage of the growing Pod Mod trend becoming a third party producer of 510 adaptors, RBA coil heads and RDTA pods for various devices and their latest RDTA Pods bare the name of their flagship RTA the Soulmate. The Soulmate RDTA Pod for the Drag S/X is one of these RDTA Pods giving a rebuildable option with true RDTA flavour, independent adjustable airflow and a leak resistant solution to the Drag X/S, this you can leave attached overnight without getting leakage unlike with the standard pods, let's give it a look!
___________________________________________________________________
In The Box
Contents:
1* Soulmate RDTA Pod
1* Extra Cap
2* Cotton
2* Coils
1* Screw Driver
1* Accessory Bag
___________________________________________________________________
Soulmate RDTA Pod For Drag S/X Specs and Features:
Deck Diameter: 15.5mm
Diameter: 26mm (widest point)
At Base: 24mm
Height: 38.75mm (short cap)
Height: 42.75mm (Higher profile cap)
Capacity: 3.5ml
Fit for: VOOPOO Drag X/S Mod Pod Kit
Deck detaches giving 510 threading
Independent Adjustable Airflow
Bottom Fill
Misleading the base it actually 24mm, the 15.5mm is the diameter of deck!
___________________________________________________________________
What You Receive?
You receive one complete Soulmate RDTA Pod with short cap pre-installed. You also receive a second cap which has the same bore but a couple of steps to give it a higher profile (this is the cap i preferred). You also receive Cotton and 2 MTL/RDL coils with no specs but are 2.5ID and came out at 0.4ohm which surprised me i was expecting around 0.7ohm. You also received another Blue screwdriver for the collection as well of course spare grub screws and O-rings, very happy with what is included!
___________________________________________________________________
It's Various Parts
It wasn't until after taking most of my photos and doing my build that i actually realised the deck unscrewed from the the central pole so it does breakdown more than my photos show.
Although apart from the top of the RDTA it looks very similar to the original pod which is one complete moulding the Soulmate breaks down into many parts which is also great for cleaning.
We have the Silver ring which while holding the cap/mouthpiece in place screws on to the deck and at the same time tightens all the parts together to give a sealed unit. Once this ring is removed the main PCTG tube is free to be removed and the top cap can be removed from the ring. Unknown to me at the time although out the box being tight the deck does unscrew from the central pole and the base also can get pushed up and removed.
___________________________________________________________________
The Caps
Both Caps have identical bores which are most suited for a medium/loose MTL or RDL vape. The only difference as mentioned is one has stepping giving it an higher profile.
___________________________________________________________________
Filling And Fitting
When looking at the base of the completed Soulmate RDTA we have the positive and negative surround which mimics the base of a PnP coil and the same 3 magnets and stud attached silicone fill plug, it really is just like looking at the base of the standard Drag S/X pod. The bung has the same flap that we see on the original pod which is easy to lift to pull the bung out revealing a very generous fill port plenty big enough for a quick, mess free fill, the RDTA pod holds 3.5ml of liquid.
Because the base of the RDTA Pod is the same as the standard pod it just fits in place inside the Drag S/X bay the same and fits just as securely. It also fits perfectly inside the Adapt PnP 510 adaptor so it can be used on standard devices!
___________________________________________________________________
Airflow
Because the airflow no longer enters at the base of a PnP coil the airflow control on both the Drag S/X and Adapt PnP base (if using this) become completely redundant.
Instead the Soulmate has independent adjustable airflow in the form of dual slots. On either side of the deck we have a 2mm wide by 1mm in height slot and also on the cap we have the same size slot either side. When the slots on the cap are lined up with those on the side of the deck the airflow is fully open and then the cap can be turned to adjust. The airflow feeds through to be directed to hit the coil from both sides hitting the coil low down giving a combination of bottom and side airflow!
___________________________________________________________________
The Build
Ignore the fact the deck on my photos is attached to the central pole and i am doing the build with the use of the Adapt PnP base as it wasn't until afterwards i found the deck actually unscrewed from the central section and has 510 threading to build on a standard device or tab, see below:
The only con i have for the deck and build is the screw heads are both flatheads and tiny but unlike some they are quite long so no issues with the screws falling out while doing the build which is a pro. We have two slot terminals at diagonals and the screws fasten down from above. Your leads can just be slotted into the terminal and held in place one at a time against the end of the slot so it doesn't pop out while you fasten the screw down. Once fixed in position if needed use a coiling rod or fit for purpose tool to move the coil exactly where you want it, i lined it up so the airflow was hitting the lower side. Wicking is quite simple and your cotton ends could be a little shorter than in my photos but can also be longer, however you normally prefer to wick an RDTA will work fine!
___________________________________________________________________
Review Continued Below:
https://www.sourcemore.com/vxv-soulmate-...g-s-x.html
Introduction
VXV are known for producing a couple of RDA'a and RTA's that are about the best value for money atties available with only Oumier coming close in that regard. More recently VXV have took advantage of the growing Pod Mod trend becoming a third party producer of 510 adaptors, RBA coil heads and RDTA pods for various devices and their latest RDTA Pods bare the name of their flagship RTA the Soulmate. The Soulmate RDTA Pod for the Drag S/X is one of these RDTA Pods giving a rebuildable option with true RDTA flavour, independent adjustable airflow and a leak resistant solution to the Drag X/S, this you can leave attached overnight without getting leakage unlike with the standard pods, let's give it a look!
___________________________________________________________________
In The Box
Contents:
1* Soulmate RDTA Pod
1* Extra Cap
2* Cotton
2* Coils
1* Screw Driver
1* Accessory Bag
___________________________________________________________________
Soulmate RDTA Pod For Drag S/X Specs and Features:
Deck Diameter: 15.5mm
Diameter: 26mm (widest point)
At Base: 24mm
Height: 38.75mm (short cap)
Height: 42.75mm (Higher profile cap)
Capacity: 3.5ml
Fit for: VOOPOO Drag X/S Mod Pod Kit
Deck detaches giving 510 threading
Independent Adjustable Airflow
Bottom Fill
Misleading the base it actually 24mm, the 15.5mm is the diameter of deck!
___________________________________________________________________
What You Receive?
You receive one complete Soulmate RDTA Pod with short cap pre-installed. You also receive a second cap which has the same bore but a couple of steps to give it a higher profile (this is the cap i preferred). You also receive Cotton and 2 MTL/RDL coils with no specs but are 2.5ID and came out at 0.4ohm which surprised me i was expecting around 0.7ohm. You also received another Blue screwdriver for the collection as well of course spare grub screws and O-rings, very happy with what is included!
___________________________________________________________________
It's Various Parts
It wasn't until after taking most of my photos and doing my build that i actually realised the deck unscrewed from the the central pole so it does breakdown more than my photos show.
Although apart from the top of the RDTA it looks very similar to the original pod which is one complete moulding the Soulmate breaks down into many parts which is also great for cleaning.
We have the Silver ring which while holding the cap/mouthpiece in place screws on to the deck and at the same time tightens all the parts together to give a sealed unit. Once this ring is removed the main PCTG tube is free to be removed and the top cap can be removed from the ring. Unknown to me at the time although out the box being tight the deck does unscrew from the central pole and the base also can get pushed up and removed.
___________________________________________________________________
The Caps
Both Caps have identical bores which are most suited for a medium/loose MTL or RDL vape. The only difference as mentioned is one has stepping giving it an higher profile.
___________________________________________________________________
Filling And Fitting
When looking at the base of the completed Soulmate RDTA we have the positive and negative surround which mimics the base of a PnP coil and the same 3 magnets and stud attached silicone fill plug, it really is just like looking at the base of the standard Drag S/X pod. The bung has the same flap that we see on the original pod which is easy to lift to pull the bung out revealing a very generous fill port plenty big enough for a quick, mess free fill, the RDTA pod holds 3.5ml of liquid.
Because the base of the RDTA Pod is the same as the standard pod it just fits in place inside the Drag S/X bay the same and fits just as securely. It also fits perfectly inside the Adapt PnP 510 adaptor so it can be used on standard devices!
___________________________________________________________________
Airflow
Because the airflow no longer enters at the base of a PnP coil the airflow control on both the Drag S/X and Adapt PnP base (if using this) become completely redundant.
Instead the Soulmate has independent adjustable airflow in the form of dual slots. On either side of the deck we have a 2mm wide by 1mm in height slot and also on the cap we have the same size slot either side. When the slots on the cap are lined up with those on the side of the deck the airflow is fully open and then the cap can be turned to adjust. The airflow feeds through to be directed to hit the coil from both sides hitting the coil low down giving a combination of bottom and side airflow!
___________________________________________________________________
The Build
Ignore the fact the deck on my photos is attached to the central pole and i am doing the build with the use of the Adapt PnP base as it wasn't until afterwards i found the deck actually unscrewed from the central section and has 510 threading to build on a standard device or tab, see below:
The only con i have for the deck and build is the screw heads are both flatheads and tiny but unlike some they are quite long so no issues with the screws falling out while doing the build which is a pro. We have two slot terminals at diagonals and the screws fasten down from above. Your leads can just be slotted into the terminal and held in place one at a time against the end of the slot so it doesn't pop out while you fasten the screw down. Once fixed in position if needed use a coiling rod or fit for purpose tool to move the coil exactly where you want it, i lined it up so the airflow was hitting the lower side. Wicking is quite simple and your cotton ends could be a little shorter than in my photos but can also be longer, however you normally prefer to wick an RDTA will work fine!
___________________________________________________________________
Review Continued Below:
Last edited: