Hi Vaping Underground members, In this review i takes a look at the Drag 2 177W TC Kit with UFORCE T2 from Voopoo. The VOOPOO Drag 2 177W TC Kit with UFORCE T2 was supplied for the purpose of this review by Ella from Sourcemore.
Introduction
"How to win friends and influence people", a statement that is as far away from Voopoo's business practices than i can think of. Damn it! they have the Gene chip though which seems to give them the arrogance to continually upset other vaping manufacturers and the vaping community in general. The Drag hit the vaping world like a hammer with it's instant firing, impressive ramp up and accuracy. Since then between releasing other products and upsetting as many people as possible when they have seen the chance they have continually fleeced the Golden Goose relaunching the Drag with no upgrade or difference from the original other than a change of frame colour or adding a Resin panel. Voopoo have at last upgraded the Drag and bought it out as the Drag 2 and an in-built battery version the Drag Mini. The Drag see's the use of the upgraded Gene chip (Gene.Fit) an increase in power without false claims and a much more ergonomically friendly device, let's give the Drag 2 a look!
___________________________________________________________________
In the Box
Contents:
Standard Edition
1 x DRAG 2 177W
1 x UFORCE T2(5ml)
1 x UFORCE U2(pre-installed)
1 x UFORCE N3
1 x Glass Tube(3.5ml)
7 x Sealing O-Ring
1 x USB Cable
1 x GENE Chip Card
2 x User Manual
1 x Warranty Card
TPD Edition
1 x DRAG 2 177W
1 x UFORCE T2(2ml)
1 x UFORCE U2(pre-installed)
1 x UFORCE N3
1 x Glass Tube(2ml)
7 x Sealing O-Ring
1 x USB Cable
1 x GENE Chip Card
2 x User Manual
1 x Warranty Card
___________________________________________________________________
Aesthetics and Ergonomics
The Drag Kit came in the usual quite plain cardboard packaging with sleeve that Voopoo products tend to come in. On opening the device is in the top layer of the box and i received the Puzzle version which the main colour of the resin panel is Purple. The Drag 2 is also available with a Island, Aurora, Scarlet, Fire Cloud, Flame, Ink or Dawn Resin design panel, all versions have a Black Chassis and the Uforce T2 comes with matching Resin drip tip. The Resin panel is fixed on the opposite side is a removable panel which has "DRAG" printed on it. The front of the device has a Silver round fire button at the top, towards the bottom lined up vertically we have 2 smaller round Silver navigational buttons, the fire button has a concave to it while the navigational buttons are flat faced. Also on the front of the device we have the OLED screen central and right at the bottom is the micro USB port. The spine of the device is featureless and the bottom has venting and printed safety stamps and branding. The top of the device has a very raised air fed 510 plate which isn't really positioned to one side or centrally, the 510 is Gold plated and spring loaded. The side panels are curved outwards, and compared to the original Drag it's also smaller and the edges have been better rounded, the Drag 2 actually feels very nice in the hand. The Drag 2 is very aesthetically pleasing in my opinion but when giving it a shake it does have button rattle however not a major issue unlike the movement on the battery door which i will cover later.
___________________________________________________________________
Uforce T2 Specs and Features:
Dimensions: 28 x 54.5mm
Capacity: 5ml(Standard Edition)/2ml(TPD Edition)
Coil: U2/U4/U6/U8/N1/N2/N3/P2(only for Standard Edition)/D4 Coils Compatible
New Uforce U2 and N3 coils
Convenient sliding type top filling design
Thread: 510 thread
___________________________________________________________________
Uforce T2 Overview
In this review i mainly concentrate on the Drag 2 device but here is a quick look at the Uforce T2 sub-ohm Tank which there will be many reviews out there for and i myself have reviewed the original Uforce in the past. The Uforce is a very good sub-ohm tank and not just a kit tank, i received the standard version which has a capacity of 5ml with the installed bulge glass, also included is a straight glass with 3.5ml capacity making it the same as the original. In fact apart from different style texturing top and bottom and a different drip tip as far as i can tell both aesthetically and performance wise they are basically the same tank. All the threading on the Uforce T2 is excellent and the tank can be taken apart and reassembled very easily. It has a tri bottom airflow and has a slide top-fill system, the top just needs pushing where it is clearly marked and it slides open revealing a generous fill slot. The T2 does see the introduction of 2 new coils which are the pre-installed U2 which is a dual coil 0.4ohm with a rating between 40w and 80w and a best at recommendation of 55w to 65w. The other coil included and the one i tried is the N3 which is a triple mesh coil 0.2ohm with a rating between 65w and 100w and a best at recommendation of 75w to 85w. I mainly tried the Drag 2 with a lot of different tanks but as mentioned i did give the new N3 (triple mesh) coil a try which i found very good for flavour but not quite as good as say a coil from the Falcon, but not bad at all. I did actually find the sweet spot for me slightly down on the recommended best of rating loving it at 70w with airflow at halfway for the restricted lung hit i prefer.
___________________________________________________________________
Drag 2 Specs and Features:
Dimensions: 88.3 x 51 x 26.5mm
Battery: 2 x 18650 batteries (NOT included)
Power Range: 5-177W
Resistance range: 0.05-5.0ohm
Temperature Range:200-600℉/100-315℃
Innovative Mode: FIT Mode
Output Current: 0-40A
Output Voltage Range:0-7.5V
Upgraded Function: Yes
Material: Zinc Alloy & Resin
GENE.FIT chip to protect tanks from burnout
Eco-friendly colour resin plate and drip tip
OLED screen displays parameters of device clearly
Thread: 510
Resin Plate Colour: Island, Aurora, Scarlet, Fire Cloud, Flame, Ink, Dawn, Puzzle
___________________________________________________________________
Fitting The Batteries
The side panel with "DRAG" on it removes to allow you to insert dual 18650 batteries, the compartment is neat and tidy, the batteries fit well and their is a battery ribbon to help remove the batteries when they need changing. Now for the con's, orientation is Black on Black and despite having magnets top and bottom the battery door has movement with or without batteries and it's not slight!
___________________________________________________________________
The Display
The Display is sharp but very dim, it's old school only giving the information really needed. To the left of the display positioned vertically we have the 2 battery status bars, next to this is resistance top, underneath is voltage which changes to watts when in temp control and at the bottom seconds vaped. The right hand side of the screen displays wattage or temperature and mode information.
___________________________________________________________________
Review Continued Below:
Introduction
"How to win friends and influence people", a statement that is as far away from Voopoo's business practices than i can think of. Damn it! they have the Gene chip though which seems to give them the arrogance to continually upset other vaping manufacturers and the vaping community in general. The Drag hit the vaping world like a hammer with it's instant firing, impressive ramp up and accuracy. Since then between releasing other products and upsetting as many people as possible when they have seen the chance they have continually fleeced the Golden Goose relaunching the Drag with no upgrade or difference from the original other than a change of frame colour or adding a Resin panel. Voopoo have at last upgraded the Drag and bought it out as the Drag 2 and an in-built battery version the Drag Mini. The Drag see's the use of the upgraded Gene chip (Gene.Fit) an increase in power without false claims and a much more ergonomically friendly device, let's give the Drag 2 a look!
___________________________________________________________________
In the Box
Contents:
Standard Edition
1 x DRAG 2 177W
1 x UFORCE T2(5ml)
1 x UFORCE U2(pre-installed)
1 x UFORCE N3
1 x Glass Tube(3.5ml)
7 x Sealing O-Ring
1 x USB Cable
1 x GENE Chip Card
2 x User Manual
1 x Warranty Card
TPD Edition
1 x DRAG 2 177W
1 x UFORCE T2(2ml)
1 x UFORCE U2(pre-installed)
1 x UFORCE N3
1 x Glass Tube(2ml)
7 x Sealing O-Ring
1 x USB Cable
1 x GENE Chip Card
2 x User Manual
1 x Warranty Card
___________________________________________________________________
Aesthetics and Ergonomics
The Drag Kit came in the usual quite plain cardboard packaging with sleeve that Voopoo products tend to come in. On opening the device is in the top layer of the box and i received the Puzzle version which the main colour of the resin panel is Purple. The Drag 2 is also available with a Island, Aurora, Scarlet, Fire Cloud, Flame, Ink or Dawn Resin design panel, all versions have a Black Chassis and the Uforce T2 comes with matching Resin drip tip. The Resin panel is fixed on the opposite side is a removable panel which has "DRAG" printed on it. The front of the device has a Silver round fire button at the top, towards the bottom lined up vertically we have 2 smaller round Silver navigational buttons, the fire button has a concave to it while the navigational buttons are flat faced. Also on the front of the device we have the OLED screen central and right at the bottom is the micro USB port. The spine of the device is featureless and the bottom has venting and printed safety stamps and branding. The top of the device has a very raised air fed 510 plate which isn't really positioned to one side or centrally, the 510 is Gold plated and spring loaded. The side panels are curved outwards, and compared to the original Drag it's also smaller and the edges have been better rounded, the Drag 2 actually feels very nice in the hand. The Drag 2 is very aesthetically pleasing in my opinion but when giving it a shake it does have button rattle however not a major issue unlike the movement on the battery door which i will cover later.
___________________________________________________________________
Uforce T2 Specs and Features:
Dimensions: 28 x 54.5mm
Capacity: 5ml(Standard Edition)/2ml(TPD Edition)
Coil: U2/U4/U6/U8/N1/N2/N3/P2(only for Standard Edition)/D4 Coils Compatible
New Uforce U2 and N3 coils
Convenient sliding type top filling design
Thread: 510 thread
___________________________________________________________________
Uforce T2 Overview
In this review i mainly concentrate on the Drag 2 device but here is a quick look at the Uforce T2 sub-ohm Tank which there will be many reviews out there for and i myself have reviewed the original Uforce in the past. The Uforce is a very good sub-ohm tank and not just a kit tank, i received the standard version which has a capacity of 5ml with the installed bulge glass, also included is a straight glass with 3.5ml capacity making it the same as the original. In fact apart from different style texturing top and bottom and a different drip tip as far as i can tell both aesthetically and performance wise they are basically the same tank. All the threading on the Uforce T2 is excellent and the tank can be taken apart and reassembled very easily. It has a tri bottom airflow and has a slide top-fill system, the top just needs pushing where it is clearly marked and it slides open revealing a generous fill slot. The T2 does see the introduction of 2 new coils which are the pre-installed U2 which is a dual coil 0.4ohm with a rating between 40w and 80w and a best at recommendation of 55w to 65w. The other coil included and the one i tried is the N3 which is a triple mesh coil 0.2ohm with a rating between 65w and 100w and a best at recommendation of 75w to 85w. I mainly tried the Drag 2 with a lot of different tanks but as mentioned i did give the new N3 (triple mesh) coil a try which i found very good for flavour but not quite as good as say a coil from the Falcon, but not bad at all. I did actually find the sweet spot for me slightly down on the recommended best of rating loving it at 70w with airflow at halfway for the restricted lung hit i prefer.
___________________________________________________________________
Drag 2 Specs and Features:
Dimensions: 88.3 x 51 x 26.5mm
Battery: 2 x 18650 batteries (NOT included)
Power Range: 5-177W
Resistance range: 0.05-5.0ohm
Temperature Range:200-600℉/100-315℃
Innovative Mode: FIT Mode
Output Current: 0-40A
Output Voltage Range:0-7.5V
Upgraded Function: Yes
Material: Zinc Alloy & Resin
GENE.FIT chip to protect tanks from burnout
Eco-friendly colour resin plate and drip tip
OLED screen displays parameters of device clearly
Thread: 510
Resin Plate Colour: Island, Aurora, Scarlet, Fire Cloud, Flame, Ink, Dawn, Puzzle
___________________________________________________________________
Fitting The Batteries
The side panel with "DRAG" on it removes to allow you to insert dual 18650 batteries, the compartment is neat and tidy, the batteries fit well and their is a battery ribbon to help remove the batteries when they need changing. Now for the con's, orientation is Black on Black and despite having magnets top and bottom the battery door has movement with or without batteries and it's not slight!
___________________________________________________________________
The Display
The Display is sharp but very dim, it's old school only giving the information really needed. To the left of the display positioned vertically we have the 2 battery status bars, next to this is resistance top, underneath is voltage which changes to watts when in temp control and at the bottom seconds vaped. The right hand side of the screen displays wattage or temperature and mode information.
___________________________________________________________________
Review Continued Below: