Become a Patron!
Vaporglobal Ecig Online Mall
- Thread starter Kayla
- Start date
CCI Doge Competition RDA Atomizer （stainless steel /black /copper)
Specifications
1.The Deck has no air flow restrictions.
2.Competition Cap with air flow control all in one and a wide bore drip tip (14mm non-removable)
3.Interchangeable components with many popular 22mm attys.
4.Laser Engraved CCI Logo and Ohm symbol on the Drip Tip.
Package List
1*CCI Doge RDA atomizer
1*Phillips Screwdriver
2*Coiled Wicks,
3*Screws
2*O-rings
https://www.vaporglobal.com/atomizer...i-doge-v2.html
Specifications
1.The Deck has no air flow restrictions.
2.Competition Cap with air flow control all in one and a wide bore drip tip (14mm non-removable)
3.Interchangeable components with many popular 22mm attys.
4.Laser Engraved CCI Logo and Ohm symbol on the Drip Tip.
Package List
1*CCI Doge RDA atomizer
1*Phillips Screwdriver
2*Coiled Wicks,
3*Screws
2*O-rings
https://www.vaporglobal.com/atomizer...i-doge-v2.html
Nahualon Rebuildable Atomizer
Specifications
1.Compatible with 510 drip tip (drip tip sold separately)
2.2ml tank capacity
3.Brass center pin that extends all the way to the top of its single post design that acts as
4.the negative and the positive post
5.A spike is included to cover the fill hole
6.The top cap is specially machined to reduce the chamber of your coil for a more concentrated flavor
7.There is a 1mm air hole on the top cap and a larger one in the recessed chamber. This
8.provides the atomizer with ample airflow with no chance of leaking
9.Laser engraved logo
The Nahualon Clone Atomizer has been designed beautifully! The top cap has been perfectly machined to create a recessed Nano chamber. No need to line up your coil with the outside air hole! By utilising an external and an internal air hole, you only get the swirliest of killer flavour.
Another great feature of the Nahualon Clone Atomizer is the single post design. Simply trap your negative lead under the bottom screw and trap your positive lead under the top washer. There is a sneaky little insulator under the centre screw which allows this magic to happen safely.
Specifications
1.Compatible with 510 drip tip (drip tip sold separately)
2.2ml tank capacity
3.Brass center pin that extends all the way to the top of its single post design that acts as
4.the negative and the positive post
5.A spike is included to cover the fill hole
6.The top cap is specially machined to reduce the chamber of your coil for a more concentrated flavor
7.There is a 1mm air hole on the top cap and a larger one in the recessed chamber. This
8.provides the atomizer with ample airflow with no chance of leaking
9.Laser engraved logo
The Nahualon Clone Atomizer has been designed beautifully! The top cap has been perfectly machined to create a recessed Nano chamber. No need to line up your coil with the outside air hole! By utilising an external and an internal air hole, you only get the swirliest of killer flavour.
Another great feature of the Nahualon Clone Atomizer is the single post design. Simply trap your negative lead under the bottom screw and trap your positive lead under the top washer. There is a sneaky little insulator under the centre screw which allows this magic to happen safely.
2.Made from stainless steel with Glass, PC, and SS tank section
3.Liquid control
4.Top filling
5.Airflow control
6.Quad poles design
7.Adjustable 510 connector
8.Access to the coil, removal of deck without draining the tank
Specifications of kayfun V4.01.Stainless steel 510 drip tip
2.Made from stainless steel with Glass, PC, and SS tank section
3.Liquid control
4.Top filling
5.Airflow control
6.Quad poles design
7.Adjustable 510 connector
8.Access to the coil, removal of deck without draining the tank
Hi Zamazam,our kayfun V4 is clone ,and we produce it .do you like it ?
Attachments
Thank you ! Now kayfun v4 is hottest
Vapor Flask V3 50W Clone VV Ecig Mod
Product Name：Vapor Flask V3
Thread：510 thread
Pin：Brass
Battery Support：2pcs 18650
Material：Aluminum
Weight：0.24kg
PCB Size：19.5mm*44mm
Color：Black/red/blue/stainless steel
Variable voltage:1.0v-11.5v
Variable wattage:5.0w-50w
Atomizer Resistance:0.2ohm-2ohms-3.3ohms
Certification：CE/ROHS/FCC
Product Name：Vapor Flask V3
Thread：510 thread
Pin：Brass
Battery Support：2pcs 18650
Material：Aluminum
Weight：0.24kg
PCB Size：19.5mm*44mm
Color：Black/red/blue/stainless steel
Variable voltage:1.0v-11.5v
Variable wattage:5.0w-50w
Atomizer Resistance:0.2ohm-2ohms-3.3ohms
Certification：CE/ROHS/FCC
Freakshow RDA Rebuildable Dripping Atomizer
Specifications
1.510 threaded connection (copper center pin)
2.Tri-post design, for single or dual coil build
3.Two huge airflow slots on each side of the deck to deliver airflow from the bottom of the coils
4. Three post deck with huge lead holes
5. Airflow is directed from under coils
6. Machine post screws for durability
Specifications
1.Telescopic Insulator Switch
2.hybrid connection
3.No positive pins
4.Copper negative pin
5.Black delrin insulator to prevent short
6.Logo engraved bottom
7.Recessed button
8.Modular mod with battery extensions
9. security of a locking ring for security and misfiring. The Prime mod has the same hybrid direct to atty top cap for maximum conductivity.
#vaporglobal #ecig 1:1 Clone Hobo V2.1 RDA Atomizer for sale $12.89
The Hobo RDA V2.1 allows you to unscrew the outside ring from the deck to fully expose your building area but still have the o-ring to give you a solid seal when you screw the ring back on. It's dual airflow options makes this revolutionary RDA a must have!
The Hobo RDA V2.1 is Made RDA that uses two Adjustable Airflow Controls to control cloud production and to enhance flavor production.
The Hobo RDA V2.1 allows you to unscrew the outside ring from the deck to fully expose your building area but still have the o-ring to give you a solid seal when you screw the ring back on. It's dual airflow options makes this revolutionary RDA a must have!
The Hobo RDA V2.1 is Made RDA that uses two Adjustable Airflow Controls to control cloud production and to enhance flavor production.
Hello everyone !
Merry Christmas to you and your family !
ZERO Mod Variable Wattage APV Box Mod
Specifications
1.510 threading connection
2.Copper 510 center pin (adjustable), Better conductivity .
3.Variable wattage - can be adjustable from 7.0W to 30.0W (in 0.1W increments)
4.LCD display shows atomizer resistance, battery charging level, watt and volt
5.Output voltage: 2.0-7.0V
6.Fits atomizers with resistance of 0.3-3.0ohm (1.5ohm best)
7.Micro-USB charging port
8.Houses single 18650 battery
Merry Christmas to you and your family !
ZERO Mod Variable Wattage APV Box Mod
Specifications
1.510 threading connection
2.Copper 510 center pin (adjustable), Better conductivity .
3.Variable wattage - can be adjustable from 7.0W to 30.0W (in 0.1W increments)
4.LCD display shows atomizer resistance, battery charging level, watt and volt
5.Output voltage: 2.0-7.0V
6.Fits atomizers with resistance of 0.3-3.0ohm (1.5ohm best)
7.Micro-USB charging port
8.Houses single 18650 battery
SX300 Variable Wattage 18650 APV Box Mod
Specifications
1.Chip: yihi sx300, Ensure stable power and output power
2.Recessed 510 connection
3.Brass 510 center pin
4.Gravity sensor adjust power automatically: 7-50W (in .1W increments)
5.Output voltage/current: 4-11V/10A
6.Input voltage/current: 3.2-4.2V (3.7V typical)/1.5-18A
7.Atomizer resistance: 0.2-1ohm
8.prefect product,high quality9.with USB charger connect,you need not to dismantle battery,easy to charger
Specifications
1.Chip: yihi sx300, Ensure stable power and output power
2.Recessed 510 connection
3.Brass 510 center pin
4.Gravity sensor adjust power automatically: 7-50W (in .1W increments)
5.Output voltage/current: 4-11V/10A
6.Input voltage/current: 3.2-4.2V (3.7V typical)/1.5-18A
7.Atomizer resistance: 0.2-1ohm
8.prefect product,high quality9.with USB charger connect,you need not to dismantle battery,easy to charger
Attachments
Specifications of kayfun V4.01.Stainless steel 510 drip tip
2.Made from stainless steel with Glass, PC, and SS tank section
3.Liquid control
4.Top filling
5.Airflow control
6.Quad poles design
7.Adjustable 510 connector
8.Access to the coil, removal of deck without draining the tank
Specifications of kayfun V4.01.Stainless steel 510 drip tip
2.Made from stainless steel with Glass, PC, and SS tank section
3.Liquid control
4.Top filling
5.Airflow control
6.Quad poles design
7.Adjustable 510 connector
8.Access to the coil, removal of deck without draining the tank
Marquis RDA
The raised block on the marquis incorporates two 2.5mm air holes bored through the raised block. Building your coil in line with the air holes in the block is easy with included coil building rods and offers you perfect alignment every time. This could possibly be the easiest RDA to build coils. The included coil building rods are design to lock into blind holes positioned directly in line with the raised block air intake holes for vertical coil builds, the smaller coiling tools ( 2.5mm and 3mm) can also slide through the air intake holes for perfectly aligned chimney builds. These coil tools can stay in position until after all your coil wires are connected and tightened. Incorporates two negative deck screws for easy dual coil wire trapping.
Another innovative feature is a crown style wire trap center positive post. This design allows you to “trap” your wires via raised tabs on the center post. Once the screw is tightened, the wires are trapped and cannot slip out. This unique center post design along with the coiling tools will also allow you to add (before cutting wire)or remove wraps from your coil with ease. The raised block and low profile top cap create a very small atomization chamber that will generate great flavor even at higher wattages and low ohm builds. The air flow is fully adjustable (rotating the cap) with a maximum intake of 2x 2.5mm air holes. The top cap incorporates three air intake holes to allow dual coil and single coil builds, single coils can be built in either position.
The top cap on the Marquis includes a removable lid, this will allow for easy access to dripping without the need to re-adjust our airflow. The included 10mm wide bore drip and the drip tip adapters are insulated with a high temp PEEK insulator to help with heat transferring to the drip tip. The drip tip/adapters thread on to the PEEK insulator and are held in the top cap with an o ring for easy removal. The solid copper 510 center post is removable (This is a secondary pin and will not cause the crown post to loosen if removed) to allow for a few millimeters of adjustability. This is not a full functioning feature and will require additional small diameter o rings to hold the extended center pin in place.
https://www.vaporglobal.com/wholesale/atomizer/marquis/marquis.html
The raised block on the marquis incorporates two 2.5mm air holes bored through the raised block. Building your coil in line with the air holes in the block is easy with included coil building rods and offers you perfect alignment every time. This could possibly be the easiest RDA to build coils. The included coil building rods are design to lock into blind holes positioned directly in line with the raised block air intake holes for vertical coil builds, the smaller coiling tools ( 2.5mm and 3mm) can also slide through the air intake holes for perfectly aligned chimney builds. These coil tools can stay in position until after all your coil wires are connected and tightened. Incorporates two negative deck screws for easy dual coil wire trapping.
Another innovative feature is a crown style wire trap center positive post. This design allows you to “trap” your wires via raised tabs on the center post. Once the screw is tightened, the wires are trapped and cannot slip out. This unique center post design along with the coiling tools will also allow you to add (before cutting wire)or remove wraps from your coil with ease. The raised block and low profile top cap create a very small atomization chamber that will generate great flavor even at higher wattages and low ohm builds. The air flow is fully adjustable (rotating the cap) with a maximum intake of 2x 2.5mm air holes. The top cap incorporates three air intake holes to allow dual coil and single coil builds, single coils can be built in either position.
The top cap on the Marquis includes a removable lid, this will allow for easy access to dripping without the need to re-adjust our airflow. The included 10mm wide bore drip and the drip tip adapters are insulated with a high temp PEEK insulator to help with heat transferring to the drip tip. The drip tip/adapters thread on to the PEEK insulator and are held in the top cap with an o ring for easy removal. The solid copper 510 center post is removable (This is a secondary pin and will not cause the crown post to loosen if removed) to allow for a few millimeters of adjustability. This is not a full functioning feature and will require additional small diameter o rings to hold the extended center pin in place.
https://www.vaporglobal.com/wholesale/atomizer/marquis/marquis.html
Mini E Pipe 628 E Cigarette 350mAh With Wood Color
Specifications1.Smaller than e pipe 618,closer to real pipe2.five key switch short circuit protection3.Pure taste, three cartridge free send4.Battery is similar to ego battery, easy for charge5. Easy to use, no hassle to fill e liquid, cartridge is replaceable, and it's 510 thread. You could also refill liquid when the cartridge is empty.
Specifications1.Smaller than e pipe 618,closer to real pipe2.five key switch short circuit protection3.Pure taste, three cartridge free send4.Battery is similar to ego battery, easy for charge5. Easy to use, no hassle to fill e liquid, cartridge is replaceable, and it's 510 thread. You could also refill liquid when the cartridge is empty.
Stainless Steel Taifun GT 2 Atomizer With Airflow Control
Specifications
1.Atomizer for self-filling, with a capacity of 5ml.
2.Multifunctionality of the evaporator fills a gap in the Taifun family.
3.This evaporator can be used with fiberglass wick, with a stainless steel strainer or with the cotton pads.
4. Plexiglas used in the product should not react chemically with liquidams, but it is not 100% confirmed.
5.Stainless steel perfectly fits with plexiglas, which prevents leakage of liquid.
Specifications 1.Atomizer for self-filling, with a capacity of 5ml.
2.Multifunctionality of the evaporator fills a gap in the Taifun family.
3.This evaporator can be used with fiberglass wick, with a stainless steel strainer or with the cotton pads.
4. Plexiglas used in the product should not react chemically with liquidams, but it is not 100% confirmed.
5.Stainless steel perfectly fits with plexiglas, which prevents leakage of liquid.
Nego-Twist 2200mAh Variable Voltage E-Cigarette Battery
Specifications of Nego-twist 2200mah
1.Battery features: Press quickly 5 times to turn on/off
2.Variable voltage (spin dial): Can be adjusted from
3.3-4.8V3.510&eGo threading connector
4.Comfortable and ergnomic spin dial
5.Long-time lasting battery,fast charge
6. 2200mah big capacity
Specifications of Nego-twist 2200mah
1.Battery features: Press quickly 5 times to turn on/off
2.Variable voltage (spin dial): Can be adjusted from
3.3-4.8V3.510&eGo threading connector
4.Comfortable and ergnomic spin dial
5.Long-time lasting battery,fast charge
6. 2200mah big capacity
Variable Voltage / Wattage APV Mod Vamo V8
1.Variable wattage - can be adjustable from 3.0W to 40.0W (in 0.5W increments)
2.Atomizer resistance check
3.Puff counter and battery level display
4.Battery reverse polarity protection
5.Power interruption memory - Memorize previous power settings before power interruption when power resumes
6.Time limit protection function (10 seconds)
7.Auto warning of over-voltage and low-voltage
8.Bottom vent hole
9.Laser engraved logo
10.510/eGo threading connector (brass center pin)
11.Removable beauty ring
12.Compatible with 510 and eGo threaded atomizers with resistance 1.0-5.0ohm
13.Can be powered by 1*18650/1*18350/2*18350 batteries
14.It can work as a power bank after a 510 to USB adapter is introduced
1.Variable wattage - can be adjustable from 3.0W to 40.0W (in 0.5W increments)
2.Atomizer resistance check
3.Puff counter and battery level display
4.Battery reverse polarity protection
5.Power interruption memory - Memorize previous power settings before power interruption when power resumes
6.Time limit protection function (10 seconds)
7.Auto warning of over-voltage and low-voltage
8.Bottom vent hole
9.Laser engraved logo
10.510/eGo threading connector (brass center pin)
11.Removable beauty ring
12.Compatible with 510 and eGo threaded atomizers with resistance 1.0-5.0ohm
13.Can be powered by 1*18650/1*18350/2*18350 batteries
14.It can work as a power bank after a 510 to USB adapter is introduced
Dual Coil Sub Ohm Tank Kanger SUBTANK Atomizer Clone
SpecificationsKanger Subtank Features:Super vapor
RBA with organic cotton
New airflow
New design structure
Strengthen Pyrex glass
Spring loaded 510
Kanger Subtank BPDC:Long life
Super pure taste
New designed coils
World wide patent
Enlarge heating section
BPDC : 0.5ohms/ Range 7w-30w
Kanger Subtank RBA:Rebuildable atomizer
Easy ejuice filling
New airflow control
SpecificationsKanger Subtank Features:Super vapor
RBA with organic cotton
New airflow
New design structure
Strengthen Pyrex glass
Spring loaded 510
Kanger Subtank BPDC:Long life
Super pure taste
New designed coils
World wide patent
Enlarge heating section
BPDC : 0.5ohms/ Range 7w-30w
Kanger Subtank RBA:Rebuildable atomizer
Easy ejuice filling
New airflow control
Kamry 20 E Cigarette Mod
Compatible with 0.3 ohm~3.0 ohm atomizers
Input voltage/current: 3.2-4.3V/1.5-7A
Output voltage/current: 4-8V/10A
High temperature protection.If the device is over 70 degree the device, will shut itself down.
https://www.vaporglobal.com/wholesal.../kamry-20.html
Compatible with 0.3 ohm~3.0 ohm atomizers
Input voltage/current: 3.2-4.3V/1.5-7A
Output voltage/current: 4-8V/10A
High temperature protection.If the device is over 70 degree the device, will shut itself down.
https://www.vaporglobal.com/wholesal.../kamry-20.html
26650 Copper/Brass Godfather/ Made Man Mod
Specifications1.510 threading connection
2.Without 510 center pin, so your atomizer will connect directly to the positive pole of the battery
3.Bottom magnetic firing button, without locking ring
4.Houses single 26650 battery
5.Laser engraved logo
Specifications1.510 threading connection
2.Without 510 center pin, so your atomizer will connect directly to the positive pole of the battery
3.Bottom magnetic firing button, without locking ring
4.Houses single 26650 battery
5.Laser engraved logo
T1000 E Cigarette Mod Variable Voltage From 3.6V To 4.8V
1. 100% polish stainless steel body
2. Variable voltage from 3.6V to 4.8V
3. 5 clicks on/off function
4. Newest shape design, and detachable mod
5. Suitbale for 18500 battery
6.For ego series atomizers
7. Short-circuit protection
1. 100% polish stainless steel body
2. Variable voltage from 3.6V to 4.8V
3. 5 clicks on/off function
4. Newest shape design, and detachable mod
5. Suitbale for 18500 battery
6.For ego series atomizers
7. Short-circuit protection
Mutation X V3 RDA Rebuildable Dripping Atomizer
1.The 18 airflow airholes are upgraded to be reasonablely tilted, changing the way the air hits the coils and allowing a “Hurricane” effect inside the rda.
2.The central positive post is thinner,creating more space to hold the coils.
3.Philip Head Screws. Easy to handle with.
4.Extra 510 derlin adapter. You can use other 510 drip tips as you like.
5.Finned top cap for better heat dissipation6.Quad-pole design for dual coil build
1.The 18 airflow airholes are upgraded to be reasonablely tilted, changing the way the air hits the coils and allowing a “Hurricane” effect inside the rda.
2.The central positive post is thinner,creating more space to hold the coils.
3.Philip Head Screws. Easy to handle with.
4.Extra 510 derlin adapter. You can use other 510 drip tips as you like.
5.Finned top cap for better heat dissipation6.Quad-pole design for dual coil build
Kamry Original Kamry 1.0 E Cigarette With 650mah Battery
Specifications
1. Safe-automaticaly detect the short circuit, it will shutdown without using for 30 minute, more secure during the transportation.
2. Healthy-with the atomizer cover, avoiding the duct outside, freely and safely enjoy the pleasure of kamry 1.0
3. Big vapors-collect the popular technology and style in the market, make you fully enjoy the smoking around feeling
4. Easy to carry-with a fix interface on the battery,you can add any kind of lanyard style to show your special personality
5. Fashionable appearance-different design on the appearance,
6. DIY-Cutomers can diy a variety of diamond appearance.
Specifications
1. Safe-automaticaly detect the short circuit, it will shutdown without using for 30 minute, more secure during the transportation.
2. Healthy-with the atomizer cover, avoiding the duct outside, freely and safely enjoy the pleasure of kamry 1.0
3. Big vapors-collect the popular technology and style in the market, make you fully enjoy the smoking around feeling
4. Easy to carry-with a fix interface on the battery,you can add any kind of lanyard style to show your special personality
5. Fashionable appearance-different design on the appearance,
6. DIY-Cutomers can diy a variety of diamond appearance.
Kamry Original Kamry Mini X9 E Cigarette With 650mah Battery
Specifications
1.Stainless steel
2.Easy to operate
3.Exquisite mini style
4.Larger smoke vapor
5.5-clicks locking system
6.510 Thread
7.Shiny Durable Metal material
Specifications
1.Stainless steel
2.Easy to operate
3.Exquisite mini style
4.Larger smoke vapor
5.5-clicks locking system
6.510 Thread
7.Shiny Durable Metal material
From Feb12 to Feb 26, we will be on the CNY holidays. I take this chance to express our gratitude to all the business and support you have given us, and wish you all the best in New Year 2015！
In case you have any order need to be fulfilled, please order from our website www.vaporglobal.com ,we will arrange the products when we back to work .
------VaporGlobal
In case you have any order need to be fulfilled, please order from our website www.vaporglobal.com ,we will arrange the products when we back to work .
------VaporGlobal
Hello Everyone,
we are back to work for several days ,Miss you so much !
By the way if you have have some new products need to own please feel free to tell me .
New Arrival :Goblin Clone RDA Atomizer Goblin Atomizer
Specifications
1. 4 post, with DIY wicks, larger vapor
2. Material: 304 stainless
3. Adjustable airflow control
4. Rebuildable dripping atomizer
5. High temperature resistant PEEK insulator, 1.8-2.8ohm
6. Holes at the poles are 2.5 mm (to accommodate the thick cables and flat)
7. Designed for dual-coil setups and Quad coil
8. Ingenious juice guide design that distributes juice drops equally to coils.
we are back to work for several days ,Miss you so much !
By the way if you have have some new products need to own please feel free to tell me .
New Arrival :Goblin Clone RDA Atomizer Goblin Atomizer
Specifications
1. 4 post, with DIY wicks, larger vapor
2. Material: 304 stainless
3. Adjustable airflow control
4. Rebuildable dripping atomizer
5. High temperature resistant PEEK insulator, 1.8-2.8ohm
6. Holes at the poles are 2.5 mm (to accommodate the thick cables and flat)
7. Designed for dual-coil setups and Quad coil
8. Ingenious juice guide design that distributes juice drops equally to coils.
Omerta RDA Rebuildable Dripping Atomize
Specifications
1.Removable 510 drip tip
2.Unique single positive post with 2 positive terminals (Dual Positive and Negative Setup)
3.Posts material: Stainless steel
4.2 types of airflow control (O-Ring Operated):
For flavor: Use top fed airflow control
For cloud chasing: Use side airflow control
5.Reduced chamber for maximum flavors
6.510 threading connection (copper center screw)
Specifications
1.Removable 510 drip tip
2.Unique single positive post with 2 positive terminals (Dual Positive and Negative Setup)
3.Posts material: Stainless steel
4.2 types of airflow control (O-Ring Operated):
For flavor: Use top fed airflow control
For cloud chasing: Use side airflow control
5.Reduced chamber for maximum flavors
6.510 threading connection (copper center screw)
Attachments
Specifications
Features:
1.Pyrex glass tank
2.Enhanced airflow system
3.Spring-loaded 510 connector
4.Durable stainless steel hardware
5Diameter: 18.5mm
OCC
1.Pure taste
2.Durable
3.New patented coil head design
4.0.5 sub-ohm (15-30W range)
5.1.2 ohms (12-25W range)
6.OCC holds 3ml of liquid
Note: You must choose the appropriate battery and atomizer for the OCC sub-ohm coil. Organic cotton coil units might not be compatible with some clearomizers.
Because the Subtank Nano uses a sub-ohm resistance atomizer, it will only work on a mechanical mod or an electrical mod capable of 30 watts or higher. Always make sure that your mod and batteries can handle sub-ohm coils. Use an ohms calculator to be safe.
Features:
1.Pyrex glass tank
2.Enhanced airflow system
3.Spring-loaded 510 connector
4.Durable stainless steel hardware
5Diameter: 18.5mm
OCC
1.Pure taste
2.Durable
3.New patented coil head design
4.0.5 sub-ohm (15-30W range)
5.1.2 ohms (12-25W range)
6.OCC holds 3ml of liquid
Note: You must choose the appropriate battery and atomizer for the OCC sub-ohm coil. Organic cotton coil units might not be compatible with some clearomizers.
Because the Subtank Nano uses a sub-ohm resistance atomizer, it will only work on a mechanical mod or an electrical mod capable of 30 watts or higher. Always make sure that your mod and batteries can handle sub-ohm coils. Use an ohms calculator to be safe.
Doge X RDA Rebuildable Dripping Atomizer
Specifications
1.Wide bore drip top
2.Heat fins
3.Air flow adjustable
4.Triple posts for single or dual coil build
5.Posts material: Stainless steel
6.510 connection (adjustable copper center screw)
7.Laser engraved logo
Specifications
1.Wide bore drip top
2.Heat fins
3.Air flow adjustable
4.Triple posts for single or dual coil build
5.Posts material: Stainless steel
6.510 connection (adjustable copper center screw)
7.Laser engraved logo
18650 Verum Mechanical Mod
Specifications
1.510 threading connection
2.Copper battery contacts
3.Positive contact is adjustable
4.Bottom magnetic firing button, with reverse-threaded locking ring
5.Houses single 18650 battery
6.Carved logo
Specifications
1.510 threading connection
2.Copper battery contacts
3.Positive contact is adjustable
4.Bottom magnetic firing button, with reverse-threaded locking ring
5.Houses single 18650 battery
6.Carved logo
FUhattan V2 18650 Mechanical Mod
Specifications
1.Recessed 510 connection
2.Copper 510 center pin
3.Copper contacts
4.2 air holes on the top cap
5.Copper tube wrapped with carbon fiber
6.Bottom magnetic firing button, without lock
7.Engraved logo8.Houses single 18650 battery
Specifications
1.Recessed 510 connection
2.Copper 510 center pin
3.Copper contacts
4.2 air holes on the top cap
5.Copper tube wrapped with carbon fiber
6.Bottom magnetic firing button, without lock
7.Engraved logo8.Houses single 18650 battery
Authentic Eleaf IStick 30W 2200mAh Variable Voltage / Wattage Mod
Specifications
1.Click the square button for 5 times to turn on/off the mod
2.Click the square button for 3 times to switch the VV/VW mode when the battery is turned on
3.Variable wattage - can be adjustable from 5.0W to 30.0W (in .1W increments)
4.Variable voltage - can be adjustable from 2.0V to 8.0V (in .1V increments)
5.Micro-USB charging port
6.0.8" OLED screen displays battery condition, resistance, wattage and voltage
7.Over 10s protection
8.Atomizer short-circuit protection
9.Low-voltage protection (lower than 3.3V)
10.Unlock the low-voltage protection (above 3.7V)
11.Low power alert (lower than 10%)12.Rated resistance range: 0.4-5ohm
Specifications
1.Click the square button for 5 times to turn on/off the mod
2.Click the square button for 3 times to switch the VV/VW mode when the battery is turned on
3.Variable wattage - can be adjustable from 5.0W to 30.0W (in .1W increments)
4.Variable voltage - can be adjustable from 2.0V to 8.0V (in .1V increments)
5.Micro-USB charging port
6.0.8" OLED screen displays battery condition, resistance, wattage and voltage
7.Over 10s protection
8.Atomizer short-circuit protection
9.Low-voltage protection (lower than 3.3V)
10.Unlock the low-voltage protection (above 3.7V)
11.Low power alert (lower than 10%)12.Rated resistance range: 0.4-5ohm
Mutation X V4 RDA Rebuildable Dripping Atomizer
1.Cusstom extreme wide bore drip tip
2.Quad-pole design, for dual coil build
3.Split center post design for ease of build
4.Heat Fins on top for maximum heating disbursement
5.AFC top cap has multiple holes sizes for even more condensed Showering Effect
Ultra deep juice well
6.Bottom air slits openings are for additional heat disbursement
7.Revolutionary AFC controls the denseness of the vapor, also controls the swirling effect in combination with the showering effect
8.Copper 510 center pin for maximum conductivity
9.510 threading connection
10.Laser engraved logo
1.Cusstom extreme wide bore drip tip
2.Quad-pole design, for dual coil build
3.Split center post design for ease of build
4.Heat Fins on top for maximum heating disbursement
5.AFC top cap has multiple holes sizes for even more condensed Showering Effect
Ultra deep juice well
6.Bottom air slits openings are for additional heat disbursement
7.Revolutionary AFC controls the denseness of the vapor, also controls the swirling effect in combination with the showering effect
8.Copper 510 center pin for maximum conductivity
9.510 threading connection
10.Laser engraved logo
1:1 Clone Turbo RDA Rebuildable Dripping Atomizer
Turbo RDA is the first RDA to have a turbine inside. This design is to improve air flow to create more clouds compared to other RDAs. The Turbo is a made with stainless steel with a bottom heat sink for a cooler vape. Negative posts are milled directed onto the deck to prevent the posts from spinning when screwing down your build.
1.Compatible with 510 drip tip (drip tip sold separately)
2.Plastic turbine wheel
3.Heat sink bottom to dissipate heat
4.Square center post, and negative posts machined to the deck that prevents spinning posts
5.Adjustable airflow
6.Deep juice well
https://www.vaporglobal.com/wholesale/atomizer/turbo/turbo.htmlView attachment 17650 View attachment 17651 View attachment 17652 View attachment 17653 View attachment 17650 View attachment 17651 View attachment 17652 View attachment 17653
Turbo RDA is the first RDA to have a turbine inside. This design is to improve air flow to create more clouds compared to other RDAs. The Turbo is a made with stainless steel with a bottom heat sink for a cooler vape. Negative posts are milled directed onto the deck to prevent the posts from spinning when screwing down your build.
1.Compatible with 510 drip tip (drip tip sold separately)
2.Plastic turbine wheel
3.Heat sink bottom to dissipate heat
4.Square center post, and negative posts machined to the deck that prevents spinning posts
5.Adjustable airflow
6.Deep juice well
https://www.vaporglobal.com/wholesale/atomizer/turbo/turbo.htmlView attachment 17650 View attachment 17651 View attachment 17652 View attachment 17653 View attachment 17650 View attachment 17651 View attachment 17652 View attachment 17653
Smaug 150W VW Variable Wattage Box Mod
Specifications of Smaug 150W
1.SX1500 chip
2.510 threading connection, with adjustable copper center pin
3.Variable wattage from 7W to 150W in 1W increments
4.0.75" LCD display shows resistance, voltage/wattage, settled vaping time, battery level and puffs
5.Short circuit protection
6.Reverse polarity protection
7.Low voltage warning
8.Supports 0.3-3 ohm atomizers
9.Single battery input: 3.2-4.2V
10.Lock/unlock function: Click the power button 3 times quickly to lock/unlock the output
Magnet back cover
11.woek with dual 18650 batteries
12.With dragon pattern on the mod
https://www.vaporglobal.com/wholesale/mod/smaug/smaug-150w.html
PS: 2th Anniversary Celebration Sale
From April 1,2015. VaporGlobal has many products on sale .welcome to order fromwww.vaporglobal.com
Specifications of Smaug 150W
1.SX1500 chip
2.510 threading connection, with adjustable copper center pin
3.Variable wattage from 7W to 150W in 1W increments
4.0.75" LCD display shows resistance, voltage/wattage, settled vaping time, battery level and puffs
5.Short circuit protection
6.Reverse polarity protection
7.Low voltage warning
8.Supports 0.3-3 ohm atomizers
9.Single battery input: 3.2-4.2V
10.Lock/unlock function: Click the power button 3 times quickly to lock/unlock the output
Magnet back cover
11.woek with dual 18650 batteries
12.With dragon pattern on the mod
https://www.vaporglobal.com/wholesale/mod/smaug/smaug-150w.html
PS: 2th Anniversary Celebration Sale
From April 1,2015. VaporGlobal has many products on sale .welcome to order fromwww.vaporglobal.com
Large Capacity Variable Wattage Original SMY60 Box Mod
1.Carbon fiber material with colorful display
2.With USB Charging Port and heating emission holes
3.Huge variable wattage power from 7-60W
4.Best design , good appearance with good quality
5. Four safety protection :
1)short circuit protection
2)Protection of opposite connection
3)Protection of temperature control
4)Protection of low voltage
1.Carbon fiber material with colorful display
2.With USB Charging Port and heating emission holes
3.Huge variable wattage power from 7-60W
4.Best design , good appearance with good quality
5. Four safety protection :
1)short circuit protection
2)Protection of opposite connection
3)Protection of temperature control
4)Protection of low voltage
E Cig Mad Hatter RDA Atomizer
Specifications of Mad Hatter RDA Atomizer
1.Flip Top Cap for easy dripping
2.22mm diameter
3.Three Post Design
4.Machine post screws for durability
5.Two huge adjustable airflow slots
6.Airflow is directed from under coils
7.Uniquely serialized
8.Very deep juice well
https://www.vaporglobal.com/wholesale/atomizer/mad-hatter/mad-hatter.html
Specifications of Mad Hatter RDA Atomizer
1.Flip Top Cap for easy dripping
2.22mm diameter
3.Three Post Design
4.Machine post screws for durability
5.Two huge adjustable airflow slots
6.Airflow is directed from under coils
7.Uniquely serialized
8.Very deep juice well
https://www.vaporglobal.com/wholesale/atomizer/mad-hatter/mad-hatter.html
E Cig Cherry Bomber Box Mod
Specifications of Cherry Bomber Box Mod
1.Aluminum Body and Sliding Door
2.Full Mechanical Mod
3.Works in Single or Dual 18650 Mode
4.Floating and Adjustable Copper Contacts
5.Brass 510 Connector
6. Brass Firing Pin w/ Twist Lock
7.Threaded Delrin Insulator (easy to replace)
8.Adjustable Battery Contacts (no spring contacts)
9.No Use of Wire/Minimal Voltage Drop
https://www.vaporglobal.com/wholesale/mod/cherry-bomber/cherry-bomber.html
Specifications of Cherry Bomber Box Mod
1.Aluminum Body and Sliding Door
2.Full Mechanical Mod
3.Works in Single or Dual 18650 Mode
4.Floating and Adjustable Copper Contacts
5.Brass 510 Connector
6. Brass Firing Pin w/ Twist Lock
7.Threaded Delrin Insulator (easy to replace)
8.Adjustable Battery Contacts (no spring contacts)
9.No Use of Wire/Minimal Voltage Drop
https://www.vaporglobal.com/wholesale/mod/cherry-bomber/cherry-bomber.html
2th Anniversary Celebration
Thanks for supporting VaporGlobal ,The price of our product has been dropped on our webiste www.vaporglobal.com .
Also There is some special price for some products. the quantity is limited .if you want ,Please contact me .
my skype:vaporglobal4
whatsapp:+8613410218564
Available Quantity
Enigma atomizer: stainless steel:2pcs
Golden : 4pcs $4.00
Tobh Atty : black: 4pcs
Brass: 7pcs $4.17
Origen stainless steel: 2pcs
copper: 2pcs
Black: 2pcs
Brass: 2pcs $4.67
Plume Veil: White: 3pcs $4.33
SOD 5K Stainless steel: 5pcs $5.00
Black: 5pcs $5.83
454 Atomizer copper: 4pcs $5.83
Black: 8pcs $4.67
Thanks for supporting VaporGlobal ,The price of our product has been dropped on our webiste www.vaporglobal.com .
Also There is some special price for some products. the quantity is limited .if you want ,Please contact me .
my skype:vaporglobal4
whatsapp:+8613410218564
Available Quantity
Enigma atomizer: stainless steel:2pcs
Golden : 4pcs $4.00
Tobh Atty : black: 4pcs
Brass: 7pcs $4.17
Origen stainless steel: 2pcs
copper: 2pcs
Black: 2pcs
Brass: 2pcs $4.67
Plume Veil: White: 3pcs $4.33
SOD 5K Stainless steel: 5pcs $5.00
Black: 5pcs $5.83
454 Atomizer copper: 4pcs $5.83
Black: 8pcs $4.67
Aspire Atlantis v2.0 Sub Ohm Tank
1.Atlantis v2.0 by Aspire is the upgraded version of the popular Atlantis. This innovative tank system brings new improvements such as an improved adjustable airflow which allows the air to flow more easily and conveniently.
2.The Atlantis v2.0 features a larger 3ml capacity compared to the original 2ml capacity of the Atlantis. The Atlantis 2.0 features a new cooling system located at the top of the tank which allows you to adjust the temperature of vapor by rotating the valve to control the amount of external air. The Atlantis 2.0 also features a large stainless round drip which provides a RDA-like experience
https://www.vaporglobal.com/aspire-atlantis-v2.html
1.Atlantis v2.0 by Aspire is the upgraded version of the popular Atlantis. This innovative tank system brings new improvements such as an improved adjustable airflow which allows the air to flow more easily and conveniently.
2.The Atlantis v2.0 features a larger 3ml capacity compared to the original 2ml capacity of the Atlantis. The Atlantis 2.0 features a new cooling system located at the top of the tank which allows you to adjust the temperature of vapor by rotating the valve to control the amount of external air. The Atlantis 2.0 also features a large stainless round drip which provides a RDA-like experience
https://www.vaporglobal.com/aspire-atlantis-v2.html
Variable Wattage Majesty 150w Box Mod
Specifications
1. ON / OFF screen locking, prevention of thievery2. Screen display orientation by 360 degrees, 180 degrees display orientation change3. Advice for the atomizer to intelligently identify the power and for the best use power range4. Use habit memory function,reducing the adjusting time for next time's use5. Overheat hint,avoiding the products from being damaged for the overheat caused6. Intelligent and fast charging, display the battery level, battery quality, life supervising7.Shortcircuit protection, Protect the battery from contrary connecting, low battery indication, temperature protection,low atomizer resistance protection8. Normal LED display: power setting, battery level, working voltage, resistance
Specifications
1. ON / OFF screen locking, prevention of thievery2. Screen display orientation by 360 degrees, 180 degrees display orientation change3. Advice for the atomizer to intelligently identify the power and for the best use power range4. Use habit memory function,reducing the adjusting time for next time's use5. Overheat hint,avoiding the products from being damaged for the overheat caused6. Intelligent and fast charging, display the battery level, battery quality, life supervising7.Shortcircuit protection, Protect the battery from contrary connecting, low battery indication, temperature protection,low atomizer resistance protection8. Normal LED display: power setting, battery level, working voltage, resistance