review of TESLA mod:
The TESLA is one of the most sophisticated device on the market today, providing affordable function and durability.
Floating 510 center pin, fit for 510 thread.
The TESLA body has been constructed with build in ventilation throughout the body and bottom cap of the device. In the event of a battery reaching thermal melt-down, the device is designed to stop gas pressure from building by venting through the device.
The large button is the activation button. To toggle the device between power on and off, you need to fast-click the activation button 5 times (the button must be pressed five times within 2 seconds). To quickly click the button 5 times to turn the device on, the word “TESLA” will display on the screen, if the battery voltage is sufficient for operation, the system will turn on and display the messae “system on”. When the system powers down via 5 times fast-click, the OLED will display the word “TESLA” and upon successful shutdown will display the words “system off”, indicating a successful shutdown. When the device is off, there will be no output power from the TESLA and the OLED will not display.
The “ – ” (minus symbol) button is used to reduce the voltage and power settings of the device. Pressing this button will adjust the current value of either voltage or power setting. The OLED will display the corresponding voltage or power settings. When the unit is adjusted below 3.0V or 3.0W, it will cycle back to highest setting 6.0V or 15W.
The “ + ” (plus symbol) button is used to increase the voltage and power settings of the device. Pressing this button will adjust the current value of either voltage or power up. The OLED will display the corresponding voltage or power settings. When the unit is adjusted beyond 6.0V or 15W, it will cycle back to the lowest setting 3.0V or 3W.
To check the battery voltage, hold the “-” activation button down for two seconds while the OLED screen is on and unlocked. The screen will display the battery’s current operational voltage.
To use the atomizer resistance check function, hold the “+” button down for 2 seconds while the OLED screen is on and unlocked, the screen will display the connected atomizer’s resistance.
Battery:
TESLA can powered by one 18650 battery.
When the battery requires charging, the OLED will display a low battery power warning code “low W”. At this time, the device will cease output, protecting the battery from being drained until a charged battery is installed.
How to install the battery? Unscrew the bottom cap, there is spring inside the cap, then you can see the inner construction of the device, a0.6-inch screen OLED module installed inside, there is a contactor under the OLED module, when you put 18650 battery inside the mod, the flat surface connect to the spring which inside the bottom cap, the contactor on battery connect to the OLED module.
http://www.cigabuy.com/tesla-variable-voltagewattage-mod-p-3911.html
The TESLA is one of the most sophisticated device on the market today, providing affordable function and durability.
Floating 510 center pin, fit for 510 thread.
The TESLA body has been constructed with build in ventilation throughout the body and bottom cap of the device. In the event of a battery reaching thermal melt-down, the device is designed to stop gas pressure from building by venting through the device.
The large button is the activation button. To toggle the device between power on and off, you need to fast-click the activation button 5 times (the button must be pressed five times within 2 seconds). To quickly click the button 5 times to turn the device on, the word “TESLA” will display on the screen, if the battery voltage is sufficient for operation, the system will turn on and display the messae “system on”. When the system powers down via 5 times fast-click, the OLED will display the word “TESLA” and upon successful shutdown will display the words “system off”, indicating a successful shutdown. When the device is off, there will be no output power from the TESLA and the OLED will not display.
The “ – ” (minus symbol) button is used to reduce the voltage and power settings of the device. Pressing this button will adjust the current value of either voltage or power setting. The OLED will display the corresponding voltage or power settings. When the unit is adjusted below 3.0V or 3.0W, it will cycle back to highest setting 6.0V or 15W.
The “ + ” (plus symbol) button is used to increase the voltage and power settings of the device. Pressing this button will adjust the current value of either voltage or power up. The OLED will display the corresponding voltage or power settings. When the unit is adjusted beyond 6.0V or 15W, it will cycle back to the lowest setting 3.0V or 3W.
To check the battery voltage, hold the “-” activation button down for two seconds while the OLED screen is on and unlocked. The screen will display the battery’s current operational voltage.
To use the atomizer resistance check function, hold the “+” button down for 2 seconds while the OLED screen is on and unlocked, the screen will display the connected atomizer’s resistance.
Battery:
TESLA can powered by one 18650 battery.
When the battery requires charging, the OLED will display a low battery power warning code “low W”. At this time, the device will cease output, protecting the battery from being drained until a charged battery is installed.
How to install the battery? Unscrew the bottom cap, there is spring inside the cap, then you can see the inner construction of the device, a0.6-inch screen OLED module installed inside, there is a contactor under the OLED module, when you put 18650 battery inside the mod, the flat surface connect to the spring which inside the bottom cap, the contactor on battery connect to the OLED module.
http://www.cigabuy.com/tesla-variable-voltagewattage-mod-p-3911.html