Recommend a build please

[swampcrawler]

alright folks. I’m new to wrapping my own Clapton’s. I did some 26 core with 40 wrap fused Clapton’s in kanthal and wasn’t thrilled with them. I’m building in a Bonza RDA and Hive RTA if it matters.

Looking for something that ramps fast and hits like a truck.

I’m thinking 26 core 36 wrap NI80 or NI90?

I see a lot of discussions on wire type and different style builds vs others but not a ton on exactly what fused Clapton build produced the best performance. Thanks!

 

[CactusFanaticus]

Try the same build but with SS316L, 317L or nichrome, will make a world of difference.

 

[Rooster Cogburn]

28 gauge 316l SS twisted. Ramp up is fast and hits like a truck. Simplify things, the multiple wired exotic coils look good but you can get just as good performance from single wire coils. Good wicking on a good rda can match anything an exotic build can do.

 

[VAPEROXX]

I must respectfully disagree with Rooster on this one. A round single wire coil doesn't perform like an Alien coil for example. It's a matter of surface area. Simple science. Plus 40 gauge on a fused Clapton can and often does mute flavors. Try a 36 over 26 or 28 Nichrome 80 coil and see how that goes. As a coil builder with my own coil building business, I've experimented a lot with different types of coils and 40 gauge wrapping is really hit or miss. On a fused Clapton, it's a miss.

http://vapingunderground.com/threads/wts-wtt-aspex-performance-coils.434798/

 

[VAPEROXX]

By the way, if you're interested in quick ramp up time and hard hitting, it's kind of a balancing act. 36 over 26 will hit hard but ramp a little slower than say 36 over 28. But even though the 36 over 28 ramps faster, it won't hit quite as hard as 36 over 26. Make sense?

http://vapingunderground.com/threads/wts-wtt-aspex-performance-coils.434798/

 

[swampcrawler]

By the way, if you're interested in quick ramp up time and hard hitting, it's kind of a balancing act. 36 over 26 will hit hard but ramp a little slower than say 36 over 28. But even though the 36 over 28 ramps faster, it won't hit quite as hard as 36 over 26. Make sense?

http://vapingunderground.com/threads/wts-wtt-aspex-performance-coils.434798/

Thanks man. Makes absolute sense. Honestly slow ramp doesn’t bother me, BUT I’m trying to get more usable battery life. I work offshore and keeping batteries charged and swapping them out constantly is a pain. I don’t know if it’s correct or not but in my mind a faster coil has to receive power for a shorter time to deliver the hit and therefore will be easier on my batteries?

 

[VAPEROXX]

Thanks man. Makes absolute sense. Honestly slow ramp doesn’t bother me, BUT I’m trying to get more usable battery life. I work offshore and keeping batteries charged and swapping them out constantly is a pain. I don’t know if it’s correct or not but in my mind a faster coil has to receive power for a shorter time to deliver the hit and therefore will be easier on my batteries?

I would go 36 over 28 for battery life.

http://vapingunderground.com/threads/wts-wtt-aspex-performance-coils.434798/

 

[midknight420]

I'm trying my hand at a 2×28/38 fused clapton. Will that work out ok? Now I'm questioning if I should have gone with 36g wrap. @VAPEROXX

Sent from my LGMP450 using Tapatalk

 

[VAPEROXX]

I'm trying my hand at a 2×28/38 fused clapton. Will that work out ok? Now I'm questioning if I should have gone with 36g wrap.

Sent from my LGMP450 using Tapatalk

38 won't be bad at all

http://vapingunderground.com/threads/wts-wtt-aspex-performance-coils.434798/

 

[midknight420]

38 won't be bad at all

http://vapingunderground.com/threads/wts-wtt-aspex-performance-coils.434798/

Awesome, thanks allot. Now my only issue is that I tried my first coil today and it started out decent but as the build went further, thewrap started getting spaced. Any suggestions on how I can remedy this?

Sent from my LGMP450 using Tapatalk

 

[midknight420]

38 won't be bad at all

http://vapingunderground.com/threads/wts-wtt-aspex-performance-coils.434798/

Awesome, thanks allot. Now my only issue is that I tried my first coil today and it started out decent but as the build went further, thewrap started getting spaced. Any suggestions on how I can remedy this?

Sent from my LGMP450 using Tapatalk

 

[VAPEROXX]

Awesome, thanks allot. Now my only issue is that I tried my first coil today and it started out decent but as the build went further, thewrap started getting spaced. Any suggestions on how I can remedy this?

Sent from my LGMP450 using Tapatalk

Slow down a little, and don't lead your Clapton hand on a fused Clapton. They should look like this when complete.

http://vapingunderground.com/threads/wts-wtt-aspex-performance-coils.434798/

 

[midknight420]

Slow down a little, and don't lead your Clapton hand on a fused Clapton. They should look like this when complete.

http://vapingunderground.com/threads/wts-wtt-aspex-performance-coils.434798/

First off all, those are beautiful fc's. What is a good angle to lead at? This was my first attempt at anything more advanced than a triple twisted.

Sent from my LGMP450 using Tapatalk

 

[VAPEROXX]

First off all, those are beautiful fc's. What is a good angle to lead at? This was my first attempt at anything more advanced than a triple twisted.

Sent from my LGMP450 using Tapatalk

Keep you Clapton wrap hand right at 90 degrees from your cores. And if you can feed your wrap wire off the spool, you'll be money way ahead

http://vapingunderground.com/threads/wts-wtt-aspex-performance-coils.434798/

 

[midknight420]

Keep you Clapton wrap hand right at 90 degrees from your cores. And if you can feed your wrap wire off the spool, you'll be money way ahead

http://vapingunderground.com/threads/wts-wtt-aspex-performance-coils.434798/

Thanks allot. My drill went out right after I finished making that coil, but, I'm getting a new one on Thursday. I'll be trying again then. I really appreciate your input.

Sent from my LGMP450 using Tapatalk

 

[VAPEROXX]

Thanks allot. My drill went out right after I finished making that coil, but, I'm getting a new one on Thursday. I'll be trying again then. I really appreciate your input.

Sent from my LGMP450 using Tapatalk

Always glad to help a fellow builder! Much luck!

http://vapingunderground.com/threads/wts-wtt-aspex-performance-coils.434798/