Reccomedation for Pre-Built RDA coils?

Discussion in 'General Rebuildable Discussion (RTA/RBA/RDA)' started by Lucros, Dec 10, 2017.

  1. Lucros

    Lucros New Member

    Blog Posts:
    0
    Joined:
    Dec 8, 2017
    Messages:
    44
    Hello! Was wondering what you all would recommend for Pre-built coils, Id like SS as ramp up time ruins the vape for me, I’ll be using a Pulse BF sqounk mod, Dead Rabbit RDA, and a iJoy 20700 3000mAh 40amp battery (cant remember the video but I believe the continuous discharge rate is 30amps).

    I’m not positive, but I believe the lowest I can safely go is like .18-.2, but I’m more then open to what you all excellent people suggest. I do want Pre-built coils for now as I don’t have a ohm reader and I’m not comfortable building my own yet. Any recommendations would be welcome ^.^
     
    zephyr likes this.
  2. Zohmbiebuilds

    Zohmbiebuilds Silver Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Oct 18, 2017
    Messages:
    1,007
    Any thing from Wotofo in terms of mad produced. I have demon killer decent rating but later after trying geek vape specialty wire and Wotofo comp wire there leagues better. Wotofo even makes my favorite flavor coil and they do it well (Hive) geek vape makes exceptionally good mad produced wire, and pre built coils. So does coil master

    Sent from my Z981 using Tapatalk
     
  3. r055co

    r055co VU Donator Platinum Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Jan 24, 2016
    Messages:
    5,916
    Do yourself a massive favor and don't waste your money on cheap Chinese crapwire coils from geekvape, wotofo, fasttech, etc. and get some quality coils from either @raymo2u or @CrazyChef v2.0
     
  4. CrazyChef v2.0

    CrazyChef v2.0 Gold Contributor Member For 2 Years VU Challenge Team ECF Refugee Reddit Exile

    Blog Posts:
    0
    Joined:
    Mar 13, 2017
    Messages:
    4,366
    Thanks @r055co ! Yeah, the cheap wire is just that - cheap. And also the alloy(s) used are quite questionable from some of those companies. A well made set of coils should last you at least 2 months. Much longer in many cases. Plus, the resistance listed on the Chinese coils is for the FULL LENGTH of the coils, right to the ends of the leads. Your actual end resistance will be lower after they're installed and the leads are clipped. Not good for mech users... I'd also recommend @raymo2u - he has excellent prices and quality coils. Personally, I only use Sandvik wire for the coils I make for people. It's the absolute best wire available.
     
    tazz2293, Letitia9 and raymo2u like this.
  5. skt239

    skt239 VU Donator Platinum Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Sep 16, 2015
    Messages:
    6,384
    advanced vape supply
     
    CorallineAlgae and Letitia9 like this.
  6. Brad Mitchell

    Brad Mitchell Silver Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Aug 22, 2014
    Messages:
    545
    Advanced vape supply makes great low cost coils but if you want more advanced than fused or you want better coils you need to speak to a builder.
     
    CorallineAlgae and Letitia9 like this.
  7. Neunerball

    Neunerball Platinum Contributor Member For 3 Years ECF Refugee

    Blog Posts:
    0
    Joined:
    Dec 29, 2014
    Messages:
    5,178
    Besides all the good advice you got already, try making your own coils! It's really easy, once you get the hang of it. There are plenty of "How to" videos on YouTube, showing how to build all sorts of coils.In addition, you can get more advice here at the VY.
     
    skt239 likes this.
  8. Zohmbiebuilds

    Zohmbiebuilds Silver Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Oct 18, 2017
    Messages:
    1,007
    Wotofo make better Coils than demon Hunter. Geekvape aren't bad. Crazy Chef and raymo make "specialty coils" which are probably a fuck load better. There also not as easily accessable as buying a roll to get started and get your feet wet. Cheers Chef, I am getting my drill soon.

    So yeah. He asked about pre made so I went with super accessable and out of those Wotofo and geekvape are decent coils to get started. I'd rather myself buy from someone here, no doubt, and I completely agree quality wise. But again to get your feet wet, learn ID and how to wrap, geekvape rolls are decent.

    Sent from my Z981 using Tapatalk
     
    CrazyChef v2.0 likes this.
  9. tazz2293

    tazz2293 VU Donator Bronze Contributor Member For 2 Years

    Blog Posts:
    0
    Joined:
    Mar 17, 2016
    Messages:
    440
    I have used coils from both @raymo2u and @CrazyChef v2.0.

    You cannot go wrong buying coils from either of these guys. Some of the best coils you can buy IMHO.

    In my Drop RDA I have a set of Staged Fused Clapton coils from Chef, in my Kylin I have a set of Chef's Alien coils.

    If you want super great flavor, great cloud's try Chef's or Raymo2u's coils
     
    Letitia9, skt239 and CrazyChef v2.0 like this.
  10. skt239

    skt239 VU Donator Platinum Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Sep 16, 2015
    Messages:
    6,384
    I've used them both as well. While the place I linked to above is less expensive, the coils don't last nearly as long as chef and rays.
     
    zephyr, Letitia9 and tazz2293 like this.
  11. CorallineAlgae

    CorallineAlgae Silver Contributor Member For 4 Years

    Blog Posts:
    0
    Joined:
    Jun 27, 2014
    Messages:
    783
    I also recommend Advanced Vape Supply. They're readily available, very affordable, vape great, use all SS wire, and if you happen to damage one it's no big deal as most packs have 10 coils for around $10. I generally buy their wire by the spool and make coils as needed. Been using their wire for nearly two years and they keep getting better and better.
     
    tazz2293, skt239 and Letitia9 like this.
  12. Letitia9

    Letitia9 Therion/Nano Junkie VU Donator Platinum Contributor Member For 1 Year VU Challenge Team

    Blog Posts:
    0
    Joined:
    Aug 2, 2017
    Messages:
    5,315
    I get the majority of my wire and prebuilt from AVS.
     
    CorallineAlgae and skt239 like this.

Share This Page

Close This Message