Please help not sure what do to

[Juuzxu]

Hello Im new to vaping and already have a problem And Im not sure what do to. these what ever they are called In the pic wont stick together Do I need to buy another one?

 

[jwill]

Welcome to VU. Try screwing the coil itself into the base and then threading the top piece on. Cant tell from the picture what that is for coil but are you sure it is the right coil?

 

[SteveS45]

That looks like a Baby Beast tank and do what @jwill suggested. If I am correct that it is a BB filling is done from the top sliding the opening outwards. Good Luck.

https://www.smoktech.com/atomizer/tfv8-baby

 

[Juuzxu]

Welcome to VU. Try screwing the coil itself into the base and then threading the top piece on. Cant tell from the picture what that is for coil but are you sure it is the right coil?

Im sure its the right coil but the method didn't work. I have Smok Alien 220w

 

[jwill]

Im sure its the right coil but the method didn't work. I have Smok Alien 220w

Can you screw the coil into the base at all?

 

[Juuzxu]

Can you screw the coil into the base at all?

yes i can

 

[jwill]

Are you certain that the glass is pressed down over the o-rings on each side when joining all of your pieces? Is it coming up short with the coil screwed into the base?

 

[Juuzxu]

Are you certain that the glass is pressed down over the o-rings on each side when joining all of your pieces? Is it coming up short with the coil screwed into the base?

when the glass is pressed down one side of the o-ring is not covered

 

[jwill]

when the glass is pressed down one side of the o-ring is not covered

Pic please?

 

[Juuzxu]

Pic please?

 

[jwill]

Fix that O ring and it will work. Coming up short because the glass isnt seated correctly.

 

[Juuzxu]

Fix that O ring and it will work. Coming up short because the glass isnt seated correctly.

Sorry Im new this is a weird question how can i fix the O-ring Is there an tutorial?

 

[jwill]

Pull it off and straighten it out. The inside lip should be taller than the outside lip. Put it back on straight and it will snug up correctly without snagging. If it doesn't, replace it with the spare in your packaging that came with it.

 

[SteveS45]

Is there an tutorial?

If you check the link I posted there is an exploded view of the tank.

 

[fq06]

when the glass is pressed down one side of the o-ring is not covered

Don't press it down, screw the upper part of the tank onto the base and coil.
Not many tanks that are press on, they come appart in your pocket.

Lube the oring with juice so the glass does not hang up on the oring as you screw the upper part onto the base and coil.
And like said above, replace the oring with a spare from the box, you probably stretched it from assembling the tank with dry orings.