Please help a noob will the vaporesso cascade one mod work with the freemax mesh pro?

[Seppo]

hello!
I just bought the freemax mesh pro tank and after searching for my smok xpriv mod and realising i lost it im kinda in a difficult spot.
I have a cascade one plus mod would it work with the mesh pro?
The cascade one is a stick mod without adjustable wattage but it makes around 50 to 60watts
i realise that i will have a lot lower wattage that recommended but that doesnt damage the coils right?

 

[5150sick]

You should be fine.
It looks like the device you have fires coils that are either 0.3ohms or 0.18ohms




As long as the ohms on the mesh pro's coil aren't too much lower than 0.18ohms then I don't see why it wouldn't work.

 

[Seppo]

You should be fine.
It looks like the device you have fires coils that are either 0.3ohms or 0.18ohms

View attachment 141365


As long as the ohms on the mesh pro's coil aren't too much lower than 0.18ohms then I don't see why it wouldn't work.

Thanks a lot for the aswer! The coils seem to be 0.15ohms so i guess that i will be okay

 

[5150sick]

Be careful to make sure the battery doesn't get hot.
It may happen if you chain vape since it's a little lower than 0.18

If it starts to get too warm stop using it.

 

[Seppo]

Be careful to make sure the battery doesn't get hot.
It may happen if you chain vape since it's a little lower than 0.18

If it starts to get too warm stop using it.

i just checked vaporesso other coils that you can buy for the original mod. there are coils that are 0.15 ohms (gt4 coil) for the vaporesso cascade one plus so should be fine right?

 

[5150sick]

Oh yea, if they make 0.15ohm coils for the tank that came on it then you are all set.

 

[Seppo]

Oh yea, if they make 0.15ohm coils for the tank that came on it then you are all set.

Ur the man! Thanks

 

[5150sick]

Ur the man! Thanks

You are very welcome.