Robert Sirico
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Great Price on This Device --- BLACK for $75.99 and FREE SHIPPING
BUY IT HERE ---> http://www.ecigvapeusa.com/Pioneer4You-iPV-2x-60-Watt-Box-Mod-Black_p_114.html
The iPV 2X is a powerhouse of a box mod. This variable wattage mod will allow you to fine-tune your vaping experience by adjusting your power from 7W to 60W in increments of 0.1W! Able to fire coils at 0.2Ω up to 3.0Ω, this mod is powered by a single IMR 18650 battery and is capable of producing up to 60 watts of power! The battery is removeable, but can also be charged internally with the included USB to Micro-USB cord. The OLED screen is very easy to read, and will tell you your wattage, resistance, output voltage and battery life at a glance, without having to fumble through menus. In addition to the standard firing button on the side, there's also a "touch plate" sensor next to the 510 connection. This sensor allows the device to be fired just by resting a finger or thumb on it. The iPV 2X has 510 threading, but will accept any 510 to eGo adapter if you'd like to use eGo-threaded atomizers. This mod is made of high-quality anodized aluminum, and provides more than enough power for beginners and veterans alike!
The iPV 2X has some minor physical design changes on it like a larger button, and is capable of 60W output.
Caution: We recommend only using batteries with a Continuous Discharge Rate of 20A or higher!
Specifications and Features:
Output Power: 7W - 60W
Output Voltage: 3.6V - 8.5V
Input Current: 1.3A - 20A
Input Voltage: 3.2V - 4.5V
Efficiency: 93%
Loading Resistance: 0.2Ω - 3.0Ω
Screen Size: 0.96" OLED
Low Voltage Protection
Low Resistance Protection
High Input Voltage Warning
Output Short Circuit Protection
Reverse Battery Protection
Quick Instructions:
Power On/Off: Click the firing button 5 times.
Adjust Wattage: Click or hold the + or - button to increase or decrease wattage, respectively.
Lock/Unlock: Click and hold both the + and - buttons simultaneously. The screen will indicate that this has been done correctly.
Turn the Touch Sensor On: Hold the + button and press the firing button.
Turn the Touch Sensor Off: Hold the - button and press the firing button.
BUY IT HERE ---> http://www.ecigvapeusa.com/Pioneer4You-iPV-2x-60-Watt-Box-Mod-Black_p_114.html
The iPV 2X is a powerhouse of a box mod. This variable wattage mod will allow you to fine-tune your vaping experience by adjusting your power from 7W to 60W in increments of 0.1W! Able to fire coils at 0.2Ω up to 3.0Ω, this mod is powered by a single IMR 18650 battery and is capable of producing up to 60 watts of power! The battery is removeable, but can also be charged internally with the included USB to Micro-USB cord. The OLED screen is very easy to read, and will tell you your wattage, resistance, output voltage and battery life at a glance, without having to fumble through menus. In addition to the standard firing button on the side, there's also a "touch plate" sensor next to the 510 connection. This sensor allows the device to be fired just by resting a finger or thumb on it. The iPV 2X has 510 threading, but will accept any 510 to eGo adapter if you'd like to use eGo-threaded atomizers. This mod is made of high-quality anodized aluminum, and provides more than enough power for beginners and veterans alike!
The iPV 2X has some minor physical design changes on it like a larger button, and is capable of 60W output.
Caution: We recommend only using batteries with a Continuous Discharge Rate of 20A or higher!
Specifications and Features:
Output Power: 7W - 60W
Output Voltage: 3.6V - 8.5V
Input Current: 1.3A - 20A
Input Voltage: 3.2V - 4.5V
Efficiency: 93%
Loading Resistance: 0.2Ω - 3.0Ω
Screen Size: 0.96" OLED
Low Voltage Protection
Low Resistance Protection
High Input Voltage Warning
Output Short Circuit Protection
Reverse Battery Protection
Quick Instructions:
Power On/Off: Click the firing button 5 times.
Adjust Wattage: Click or hold the + or - button to increase or decrease wattage, respectively.
Lock/Unlock: Click and hold both the + and - buttons simultaneously. The screen will indicate that this has been done correctly.
Turn the Touch Sensor On: Hold the + button and press the firing button.
Turn the Touch Sensor Off: Hold the - button and press the firing button.