Pico 85W won't turn on

Discussion in 'Regulated (Voltage / Wattage / 3.7v/ Temp Control)' started by pico85, Mar 20, 2019.

  1. pico85

    pico85 New Member

    Blog Posts:
    0
    Joined:
    Mar 20, 2019
    Messages:
    2
    Hi to everyone. After two falls (mod was still working) something rattle inside the mod, so I decided to disassembly it and see what is happening. Everything was normal so I assembled it again. After that the mod is not working. I can connect it to pc and display is turning on, battery is charging. After disconnecting, the mod turn off. When is connected to pc and atomizer is attached, the mod keeps restarting. Tried with different battery and attomizer, but it's still not turning on.
     
  2. PoppaVic

    PoppaVic Gold Contributor Member For 4 Years

    Blog Posts:
    0
    Joined:
    Sep 5, 2014
    Messages:
    2,009
    Consumer electronics == disposable.
     
  3. The Cromwell

    The Cromwell The Frugal Vapist VU Donator Diamond Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Jan 15, 2016
    Messages:
    28,077
    If it was working before disassembly and is not after reassembly.
    Then logically it must have been reassembled incorrectly.
    Try it again?
    pay close attention to the spring loaded battery terminal and that the button pusher thingys are in the proper place.

    sorry that I cannot be more help as I have never looked inside one of those mods.
     
  4. pico85

    pico85 New Member

    Blog Posts:
    0
    Joined:
    Mar 20, 2019
    Messages:
    2
    I figured it out - the positive plate isn't staying on its place. Maybe it has little glue.
     
    The Cromwell likes this.

Share This Page

Close This Message