Become a Patron!

More than 10 Kinds of Coil for Smok TFV4, Which Head i should choose?

Coben03

Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Hey, there, TFV4 tank, you have?
Smok tfv4 has more than 10 kinds of coil head,
which one you have choosen for your smok TFV4 tnak?
 

Coben03

Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Depends on what you want? Thats why there are so many heads I have them all so what is the actual question
Snowwolf 200w is my first TC mod, i want it work with my tfv4 tank, and i need some new tfv4 coil head,
i watched the post of TFV4 coils details, there are more than 10 coils head for choice, i really don't know how
choose them.
 

MrScaryZ

VU Donator
Platinum Contributor
Member For 5 Years
Snowwolf 200w is my first TC mod, i want it work with my tfv4 tank, and i need some new tfv4 coil head,
i watched the post of TFV4 coils details, there are more than 10 coils head for choice, i really don't know how
choose them.
I am not trying to be rude but you have not answered the question,,
What do you want to do??
Build or TC or ?
 

Coben03

Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
I am not trying to be rude but you have not answered the question,,
What do you want to do??
Build or TC or ?
Hey, man, thanks for your patiently answer, i want the tank work on TC model, so, which coil head i should choose?
 

MrScaryZ

VU Donator
Platinum Contributor
Member For 5 Years
Hey, man, thanks for your patiently answer, i want the tank work on TC model, so, which coil head i should choose?
Right here man
3) Temp Control series
TF-N2: 0.12ohm Ni200 dual coil head, recommend work on 400℉-600℉.

TF-N2 Air: 0.12ohm Ni200 dual coil head with two more air holes, recommend
work on 400℉-600℉.

TF-Ti: 0.33 ohm Titanium dual coil head, recommend work on 450℉-600℉

The other option is to start building
Either of the below are great for building with TC wire
TF-R1: 0.85 ohm single coil head

TF-R2: 0.25 ohm dual coil


I am using the TF-R2
Building it with 304 SS

Hope this helps
 

Coben03

Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Right here man
3) Temp Control series
TF-N2: 0.12ohm Ni200 dual coil head, recommend work on 400℉-600℉.

TF-N2 Air: 0.12ohm Ni200 dual coil head with two more air holes, recommend
work on 400℉-600℉.

TF-Ti: 0.33 ohm Titanium dual coil head, recommend work on 450℉-600℉

The other option is to start building
Either of the below are great for building with TC wire
TF-R1: 0.85 ohm single coil head

TF-R2: 0.25 ohm dual coil


I am using the TF-R2
Building it with 304 SS

Hope this helps
Man, thanks for your answer
 

AdubbaU

Bronze Contributor
Member For 4 Years
Only TC one I tried was the TF-N2, worked very well, took a lot more power and temp than expecting but you will have that covered as well with Snowwolf. I use the RBA deck with Ti dual right now and very happy. Running the 6 coil kanthal now and running great. Does not take as much power as the quad or triple but impressed. With the RBA deck most likely will not buy any more pre-made coils.

Sent from my unknown using Tapatalk
 

VapingN252

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
I love the sextuple coil. The clapton head is good if you like a hot vape or warm at low wattage. Haven't tried the tc coils yet.
 

VU Sponsors

Top