1. VAPING UNDERGROUND VAPE BANDS ARE NOW AVAILABLE!
    CLICK HERE TO GET YOURS

Hells Gate V2 build, How?

Discussion in 'New Builders Corner' started by Dann, Oct 26, 2016.

  1. Dann

    Dann New Member

    Blog Posts:
    0
    Joined:
    Oct 26, 2016
    Messages:
    2
    im not new to vaping, Ive vaped for 2 years now. i build at an intermediate level and know ohms law, i use coil jigs and prefer kanthol wire. i run efest imr 35a pulse 20a continual 3.7v batteries iv tested the and they run to spec. i purchased a hells gate v2 about 8 months ago. ive built several stiles of builds in it thus far; however i seek clouds not necessarily flavor, and like warm vapor production with a straight lung hit. i get fair clouds from it nothing to boast about though. the yep helld gate v2 is a dual parallel 18650 unregulated mod with pcb, running two rda's simultaneously through one mid-wide bore drip tip, i am currently using a .45 ohm build on it totaling four standard coils; its capable of running down to one ohm, im not pushing that for safety reasons. my question is i want to run down to .23 or in that area of ohms, at minimum above .16 ohms, using the same standard of four coils; that can push monster clouds. i cant seem to find a build that is capable on this system to do that. i can go for cool vapor production but hot is uncomfortable. each rda diameter, depth and width is 22mm, 52 mm height, massive unadjustable, and post holes are decent, airflow is rBVaGVWbmxaAUhepAAFeFyvVnqQ134.jpg hels_gate1.jpg Hell's Gate 1.jpg direct to both coils locations if anyone can assist id be grateful. in closing i use 90/10 fluid vg/pg with 1.4 mg nic per 30 ml homemade, thanks.
     
  2. BigNasty

    BigNasty Diamond Contributor Member For 4 Years ECF Refugee

    Blog Posts:
    0
    Joined:
    Jun 27, 2014
    Messages:
    10,153
    .24 ga. 3mm inner diameter. 5/6 wraps.
    2 coils per.
    Get better batteries.

    Enjoy.
     
    Whiskey likes this.
  3. Dann

    Dann New Member

    Blog Posts:
    0
    Joined:
    Oct 26, 2016
    Messages:
    2
    ive ran a similar build to that already difference being 2.5 mm coils as for better batteries the efest imr may not be as good as the sony vtc4 but can easily push the sony vtc5 off a shelf, i see no need to change batteries, if they run to spec and are able to handle the power i need from them, i am not biased toward brands i look at safety first and brands don't guarantee that. this said , i should be able to try it with a 3.0 mm diameter shortly, and within a few days shair my thoughts on it thanks for the coil suggestions, i typically run micros not macros, this will be interesting. as a parting thought, im to well acquainted with battery safety, my systems of choice are the phantom hybrid unreg tube with direct connection, my zombie hybrid direct connect tube unreg and my viggo tube unreg, battery safety is priority concern when using such mods, my rdas of choice mutation x v4, goon, and temple 24, i typically use kanthal a1 twisted tiger wire, caterpillar track and finally alien infused claptons coils, to preach about a battery being better or worse makes me sick, a battery is only as good as what you want to run on it. for noobs keep that in mind you don't need expensive batteries you need only get batteries capable of pushing the power required of your coil, following ohms law and using a good ohms tester, and always give a safety margin, no battery is truly better than another, build within the batteries limits an a panasonic will kill a sony, nothing to do with brand, just knowledge of your battery and what it can do, and how to use it safely.
     
    Last edited: Nov 2, 2016
  4. BigNasty

    BigNasty Diamond Contributor Member For 4 Years ECF Refugee

    Blog Posts:
    0
    Joined:
    Jun 27, 2014
    Messages:
    10,153
    I am going to call bullshit.
    Efest for flashlights MAYBE. they are factory 2nds 3rds, or rejects.
    They are not really ever in spec, they are rewraps. Sony, Samsung, LG are a gold standard for a reason.
     
    Droogbc likes this.
  5. McAnythingReally

    McAnythingReally New Member

    Blog Posts:
    0
    Joined:
    May 2, 2016
    Messages:
    122
    No. Just no. Want to know what makes me sick? the way that you are sitting here acting like the battery god, when you clearly have NO IDEA what you are attempting to ramble about. Nothing about what you said in regards to batteries is correct in any way shape or form. Brand means EVERYTHING when it comes to batteries. That eFest your running can have any sort of re-wrapped LG, Samsung, Panasonic, or Sony battery under that wrapper, with CDRs ranging from 4a-25a. You have NO IDEA what is under that wrap without reading the tests that have been done on them. The specs for Efest mean absolutely nothing, they overstate their specs, and have produced batteries that are sub 20A and labeled them as 30A+ batteries. What part about that is safe?

    For any beginner who happens to find this thread, please for the love of god, invest in your batteries. I dont care if you are running a 1.8 ohm coil drawing hardly any power, buy yourself a decent 20A battery from one of the big manufacturers. Its better to have way more headroom than you need, than to accidentally drop a wrap or two on a coil and push your cheap low power battery well above its CDR. That battery in your mod is the most volatile part of the mod, and should be the part that is handled with the most care, and is invested in for your safety, as well as the safety of those around you.
     
    Droogbc likes this.
  6. ArmyGrunt1996

    ArmyGrunt1996 New Member

    Blog Posts:
    0
    Joined:
    Jul 9, 2018
    Messages:
    1
    Can you run a different RDA then what the hell's gate mod comes with.
     
  7. gopher_byrd

    gopher_byrd Cranky Old Fart VU Donator Gold Contributor Member For 4 Years ECF Refugee

    Blog Posts:
    0
    Joined:
    Sep 7, 2014
    Messages:
    1,807
    As long as both the mod and RDA have a 510 connector, yes. Most mods and RDA/RTA/RDTA have 510 connectors.
     

Share This Page

Close This Message