Hi Vaping Underground members, In this review i take a look at the Wenax K1 Pod Kit from Geekvape. The Wenax K1 Pod Kit was supplied for the purpose of this review by Geekvape.
https://www.geekvape.com/wenax/Wenax-K1.html
Introduction
Geekvape need no introduction and here we have one for those trying to give up the stinkies or those that like a MTL vape using a convenient simple pod device when out and about.
The Wenax KI is the upgrade of the Wenax device and comes with 2 different refillable pods with fixed MTL coil heads. The device features two different modes which offer either both Auto and fire button activation or just Auto Draw with the fire button redundant! The K1 also has 3 different constant output settings with a form of boost for steady output and gives 3 Tier battery status indication. With it's type C USB port and ergonomic form factor let's give the new Wenax a closer look!
___________________________________________________________________
In The Box
Contents:
1 x Wenax K1 Device (2ml)
2 x Wenax K1 Pod (0.8ohm,12-16W; 1.2ohm,10-12W)
1 x USB Cable (Type-C)
Paperwork
___________________________________________________________________
Aesthetics and Ergonomics
The Wenax K1 came in simple White sample cardboard packaging with the main features listed on the reverse. The device comes in many colour options, I received the blue version which is a nice Royal Blue, the choices are Blue, Gold, Gunmetal, Black, Red, Sky Blue, Army Green, Pacific Blue or Orange.
The form factor is narrow and flat rather than cylindrical and has a round concave fire button central towards the top on the front, underneath is a small LED. Towards the top both sides we have small airflow holes and on the reverse we have "WENAX" etched into the finish.
Up top we have the protruding lightly tinted pod with fixed Delrin mouthpiece, moving to the base is where the Type C USB port can be found. Not sure if the device is Aluminium or Zinc Alloy but it's a nice lightweight, small and ergonomic!
___________________________________________________________________
Wenax K1 Specs and Features:
Size: 21.6mm × 114.6mm
Output Power: 9-16W
Battery Capacity: 600mAh
Coil: 0.8ohm,12-15W; 1.2ohm,10-12W
Charging Specification: 5V | USB-C Charging Port
Low Voltage Warning: 3.2土0.1V
PCBA Temperature Alarm: 80℃
Longest Vaping Time: 10S
Working Temperature: -10~45℃
Stand-by Current: ≤15uA
Constant output for stable performance
Lightweight with portable slim design
3-level adjustable power output
600mAh battery with Type-C fast charging
Auto Draw & Button Triggered
Auto-sleep after 10 seconds
Colours: Blue, Gold, Gunmetal, Black, Red, Sky Blue, Army Green, Pacific Blue, Orange
___________________________________________________________________
The Pods
You receive 2 pods with a different resistant coil head installed in each one, the specs are printed on the base of each pod which is needed as the pods are identical.
The pods are tinted but ever so lightly so seeing your juice is no problem at all, the section of the pod that holds your juice also protrudes outside the device so you can see the level at all times. The pod has a comfortable flat mouthpiece with quite a wide opening but when looking inside you can see it narrows further down inside to be suitable for a tighter draw. Looking at the base we have the contacts, printed specs and also to either side an opening for the auto draw tube within the pods bay, allowing the pod to get fitted either way!
To one side we have a Black Silicone plug with an arrow showing where to lift. I must say i found this quite fiddly to remove for filling but that might in part be because i had only just cut my nails. Once removed with the pod held on it's side the generous sized fill port allows a quick, mess free fill, the pod holds 2ml of liquid!
___________________________________________________________________
Fitting The Pod
looking inside the pods bay we can see the Gold plated, spring loaded contacts and to the left the small tube which leads to the membrane switch. We can also see a small hole either side on the wall of the bay which will allow air to get to the pod.
On the base of the pod we have a hole either side for the auto draw tube so it doesn't matter which way the pod gets fitted. The pod has no magnets but just uses tabs locking into indentations when press fitting into place and it gives a loud click as it locks. To remove firmly grip the pod and give it a strong pull, when in place there is no movement from the pod whatsoever!
___________________________________________________________________
Operating The K1
To turn the device on is 5 clicks of the fire button and the LED lights up Blue for 1 second, when first turned on the device can be fired by either using Auto draw or pressing the fire button. 5 more clicks of the fire button will see the LED cycling through Red, Blue and Green to confirm the mode has changed to Auto Draw, in this mode the physical button no longer fires the device so it can't fire by accident when in a pocket, another 5 clicks turns the device off which again is confirmed by the LED lighting Blue for 1 second.
The device has some form of buck boost so it doesn't suffer from drop off in power as the battery life runs down which allows for constant output settings.
I have no idea what the settings are as far as voltage or wattage output is concerned as at the time of writing details are not in depth including with information in the manual. You can change between the settings by clicking the fire button 3 times quickly and the LED will light up for 1 second in the corresponding colour, they are described as the following:
Low = White
Medium = Blue
High = Green
The device also has battery status indication which is shown by what colour the LED lights while taking a vape, the tiers are the following:
Green = 70 to 100%
Blue = 31 to 69%
Red = 0 to 30%
The LED also flashes in different colours various amounts of times to give alerts when safety protections kick in!
___________________________________________________________________
Review Continued Below:
https://www.geekvape.com/wenax/Wenax-K1.html
Introduction
Geekvape need no introduction and here we have one for those trying to give up the stinkies or those that like a MTL vape using a convenient simple pod device when out and about.
The Wenax KI is the upgrade of the Wenax device and comes with 2 different refillable pods with fixed MTL coil heads. The device features two different modes which offer either both Auto and fire button activation or just Auto Draw with the fire button redundant! The K1 also has 3 different constant output settings with a form of boost for steady output and gives 3 Tier battery status indication. With it's type C USB port and ergonomic form factor let's give the new Wenax a closer look!
___________________________________________________________________
In The Box
Contents:
1 x Wenax K1 Device (2ml)
2 x Wenax K1 Pod (0.8ohm,12-16W; 1.2ohm,10-12W)
1 x USB Cable (Type-C)
Paperwork
___________________________________________________________________
Aesthetics and Ergonomics
The Wenax K1 came in simple White sample cardboard packaging with the main features listed on the reverse. The device comes in many colour options, I received the blue version which is a nice Royal Blue, the choices are Blue, Gold, Gunmetal, Black, Red, Sky Blue, Army Green, Pacific Blue or Orange.
The form factor is narrow and flat rather than cylindrical and has a round concave fire button central towards the top on the front, underneath is a small LED. Towards the top both sides we have small airflow holes and on the reverse we have "WENAX" etched into the finish.
Up top we have the protruding lightly tinted pod with fixed Delrin mouthpiece, moving to the base is where the Type C USB port can be found. Not sure if the device is Aluminium or Zinc Alloy but it's a nice lightweight, small and ergonomic!
___________________________________________________________________
Wenax K1 Specs and Features:
Size: 21.6mm × 114.6mm
Output Power: 9-16W
Battery Capacity: 600mAh
Coil: 0.8ohm,12-15W; 1.2ohm,10-12W
Charging Specification: 5V | USB-C Charging Port
Low Voltage Warning: 3.2土0.1V
PCBA Temperature Alarm: 80℃
Longest Vaping Time: 10S
Working Temperature: -10~45℃
Stand-by Current: ≤15uA
Constant output for stable performance
Lightweight with portable slim design
3-level adjustable power output
600mAh battery with Type-C fast charging
Auto Draw & Button Triggered
Auto-sleep after 10 seconds
Colours: Blue, Gold, Gunmetal, Black, Red, Sky Blue, Army Green, Pacific Blue, Orange
___________________________________________________________________
The Pods
You receive 2 pods with a different resistant coil head installed in each one, the specs are printed on the base of each pod which is needed as the pods are identical.
The pods are tinted but ever so lightly so seeing your juice is no problem at all, the section of the pod that holds your juice also protrudes outside the device so you can see the level at all times. The pod has a comfortable flat mouthpiece with quite a wide opening but when looking inside you can see it narrows further down inside to be suitable for a tighter draw. Looking at the base we have the contacts, printed specs and also to either side an opening for the auto draw tube within the pods bay, allowing the pod to get fitted either way!
To one side we have a Black Silicone plug with an arrow showing where to lift. I must say i found this quite fiddly to remove for filling but that might in part be because i had only just cut my nails. Once removed with the pod held on it's side the generous sized fill port allows a quick, mess free fill, the pod holds 2ml of liquid!
___________________________________________________________________
Fitting The Pod
looking inside the pods bay we can see the Gold plated, spring loaded contacts and to the left the small tube which leads to the membrane switch. We can also see a small hole either side on the wall of the bay which will allow air to get to the pod.
On the base of the pod we have a hole either side for the auto draw tube so it doesn't matter which way the pod gets fitted. The pod has no magnets but just uses tabs locking into indentations when press fitting into place and it gives a loud click as it locks. To remove firmly grip the pod and give it a strong pull, when in place there is no movement from the pod whatsoever!
___________________________________________________________________
Operating The K1
To turn the device on is 5 clicks of the fire button and the LED lights up Blue for 1 second, when first turned on the device can be fired by either using Auto draw or pressing the fire button. 5 more clicks of the fire button will see the LED cycling through Red, Blue and Green to confirm the mode has changed to Auto Draw, in this mode the physical button no longer fires the device so it can't fire by accident when in a pocket, another 5 clicks turns the device off which again is confirmed by the LED lighting Blue for 1 second.
The device has some form of buck boost so it doesn't suffer from drop off in power as the battery life runs down which allows for constant output settings.
I have no idea what the settings are as far as voltage or wattage output is concerned as at the time of writing details are not in depth including with information in the manual. You can change between the settings by clicking the fire button 3 times quickly and the LED will light up for 1 second in the corresponding colour, they are described as the following:
Low = White
Medium = Blue
High = Green
The device also has battery status indication which is shown by what colour the LED lights while taking a vape, the tiers are the following:
Green = 70 to 100%
Blue = 31 to 69%
Red = 0 to 30%
The LED also flashes in different colours various amounts of times to give alerts when safety protections kick in!
___________________________________________________________________
Review Continued Below: