Hello all I've been thinking of getting a dual 18650 mechanical mod. I've decided to go with the Dimitri box mod clone. I also need a new atty since my atty for my mutation mod has a problem with one of the holes for the screws (not being able to screw all the way so my coils are never firm and in place). I heard a lot of good reviews about the Goblin rta. I'm aware you must build your own coils and not go with premade ones due to the deck being small along with the small post holes. Would the goblin fit on the Dimitri box mod? And if you do have the goblin, should I go with 26 gauge or 24 gauge kenthal, seeing as some people have problems fitting their coils all the way on their deck.
Become a Patron!
Couple questions for my new build.
- Thread starter Swaglord123
- Start date
The box and the Goblin have a 510 connection, like almost all devices do.
My build on the two Goblins I own is a dual coil 26g 7/6 wrap 2mm (5/64") => 0.3 Ohm, due to the lack of space. Same problem with a 24g wire. However, the wicking is the main problem. You have to get it just right. It's easier on the Goliath and Zephyrus both by UD as well.
My build on the two Goblins I own is a dual coil 26g 7/6 wrap 2mm (5/64") => 0.3 Ohm, due to the lack of space. Same problem with a 24g wire. However, the wicking is the main problem. You have to get it just right. It's easier on the Goliath and Zephyrus both by UD as well.