Hi Vaping Underground members, In this review i take a look at the Takit Mini V2 Semi Mech Mod from Cool Vapor. The Cool Vapor Takit Mini V2 Semi Mech Mod was supplied for the purpose of this review by Sacowin the parent company for Ultroner, DJV, SXK and Cool Vapor.
https://www.sacowin.com/product/takit-mini-v2/
Introduction
Cool Vapor are part of the Sacowin family which also includes Ultroner, DJV and SXK, i'm not that familiar with Cool Vapor products as although i have seen the odd device and atty from them on vendors sites this is the first product of theirs i have used. The Takit Mini V2 is obviously an updated device and a tube semi-mechanical device that can be used with an 18650 battery or shortened to house an 18350. The device is a semi-mechanical because although it takes the power straight from the battery as with a mechanical device we have a Mosfet PCB giving the device safety features and also means firing from a side button rather than a mechanical switch. The device comes with both an 18650 and 18350 mode Resin Sleeve or just have a metal look if you prefer. The Takit Mini V2 becomes a tiny device when using an 18350 battery and can accommodate an atty up to 24mm without overhang, it also comes with a decorative 24mm ring with a protruding loop to accommodate the included chain lanyard if that's your thing, let's give the Takit Mini V2 a closer look!
___________________________________________________________________
In The Box
Contents:
1 x Semi-Mechanical Mod (set-up in 18650 mode)
1 x 18350 Resin Tube
1 x Chain Lanyard
1 X Adaptor Loop
User Manual
___________________________________________________________________
Aesthetics and Ergonomics
The Takit Mini V2 comes in cardboard packaging with everything on one level. It's main construction is a 2 piece stainless Steel tube and comes in either Silver or Black finishes with a choice of 3 different Resin sleeves which are Red, Blue or Green. The device comes set-up in 18650 mode and i received the Silver Blue Resin version. The Stainless steel is smooth on the Silver finishes while the Black has a textured finish. When in 18350 mode the device is tiny and just get's swallowed up in the hand making it an ideal out and about stealth device especially for a MTL vape. Moving to the base we have 2 large venting holes and centre section that turns to adjust the tightness of the battery fitting, on this central section we have printed branding. Up top we have central 510 threading with the mosfet positive connection.
___________________________________________________________________
Takit Mini V2 Specs and Features:
Brand: Cool Vapor
Model: Takit Mini V2
Weight 80g (2.82oz)
Depth 24mm (0.94 inch)
Height 78mm (3.07 inch)
Width 24mm (0.94 inch)
Material: Stainless steel + resin
Battery: 1 x 18350 / 18650 ( Not included )
Max Power: 30W ( 18350 battery ) / 80W ( 18650 battery )
Input Voltage: 3.3 - 4.2V
Resistance Range: 0.5 - 3ohm ( 18350 battery ) / 0.3 - 3ohm ( 18650 battery )
Thread: 510
Colours/ Silver with Red, Blue or Green Resin Sleeve/ Black with Red, Blue or Green Resin Sleeve
___________________________________________________________________
The Takit Mini V2 Various Parts
The device consists of the top section which houses central 510 threading and unscrews from the main battery tube, looking inside this top section we can see a Mosfet fitted and looking down the 510 thread we can see the positive contact, on the side of this section we have a clear fire button. The battery tube is 2 sections screwed together and the bottom of the lower section protrudes to 24mm in diameter to match the top section while the rest of the tubing is 22mm in diameter to allow the Resin sleeve to take the diameter to 24mm. The battery cap screws into the base of the bottom tube internally rather than threading onto the outside. You receive 2 different size Resin sleeves as the top section can be screwed just to the bottom tube section to shorten the device to accommodate an 18350 battery. You also receive a 24mm decorative ring with protruding loop to allow the fitting of the supplied chain lanyard if you wish, this just gets fitted over the top of the device and when an atomizer is installed it secures the ring in position.
___________________________________________________________________
18650 or 18350 Mode
The device comes set-up to use with a 18650 battery but can be shortened to use with a 18350 and become a mini tube. The top section with fitted Mosfet screws off the top tube section which now allows the 18650 Resin sleeve to be pulled off, it is quite tight as we have a series of 4 o-rings (2 on each tube section) so the sleeve doesn't free spin. When removing the top section it is possible for the Mosfet to become dislodged and the fire button to fall out, not a big issue but you just need to be aware so you don't lose the fire button.
You could now if you wanted screw the top section back on and have a Silver (or Black) look or the top tube can be unscrewed from the bottom tube before then screwing the top section back on to have a Silver (or Black) look in 18350 mode.
Included is a shorter Resin sleeve so when the top tube is removed this can be slid over the bottom tube before screwing the top section back on so we know have a Resin look 18350 tube device.
___________________________________________________________________
Fitting The Battery
When in 18350 mode i used an EXO 18350S battery which is rebranded by many companies and can be found under the following:
Vapcell 18350/1100mAh/10A
Aspire 18350/1200mAh/10A
The battery cap screws internally into the threading and once the thread is caught then i must say the threading is very smooth. On the inside of the battery cap negative is clearly marked, so good job there. Once the battery cap is screwed back in place you can turn the centre section of the cap to slacken or tighten on to the battery for the perfect fit, Good job all round!
___________________________________________________________________
Review Continued Below:
https://www.sacowin.com/product/takit-mini-v2/
Introduction
Cool Vapor are part of the Sacowin family which also includes Ultroner, DJV and SXK, i'm not that familiar with Cool Vapor products as although i have seen the odd device and atty from them on vendors sites this is the first product of theirs i have used. The Takit Mini V2 is obviously an updated device and a tube semi-mechanical device that can be used with an 18650 battery or shortened to house an 18350. The device is a semi-mechanical because although it takes the power straight from the battery as with a mechanical device we have a Mosfet PCB giving the device safety features and also means firing from a side button rather than a mechanical switch. The device comes with both an 18650 and 18350 mode Resin Sleeve or just have a metal look if you prefer. The Takit Mini V2 becomes a tiny device when using an 18350 battery and can accommodate an atty up to 24mm without overhang, it also comes with a decorative 24mm ring with a protruding loop to accommodate the included chain lanyard if that's your thing, let's give the Takit Mini V2 a closer look!
___________________________________________________________________
In The Box
Contents:
1 x Semi-Mechanical Mod (set-up in 18650 mode)
1 x 18350 Resin Tube
1 x Chain Lanyard
1 X Adaptor Loop
User Manual
___________________________________________________________________
Aesthetics and Ergonomics
The Takit Mini V2 comes in cardboard packaging with everything on one level. It's main construction is a 2 piece stainless Steel tube and comes in either Silver or Black finishes with a choice of 3 different Resin sleeves which are Red, Blue or Green. The device comes set-up in 18650 mode and i received the Silver Blue Resin version. The Stainless steel is smooth on the Silver finishes while the Black has a textured finish. When in 18350 mode the device is tiny and just get's swallowed up in the hand making it an ideal out and about stealth device especially for a MTL vape. Moving to the base we have 2 large venting holes and centre section that turns to adjust the tightness of the battery fitting, on this central section we have printed branding. Up top we have central 510 threading with the mosfet positive connection.
___________________________________________________________________
Takit Mini V2 Specs and Features:
Brand: Cool Vapor
Model: Takit Mini V2
Weight 80g (2.82oz)
Depth 24mm (0.94 inch)
Height 78mm (3.07 inch)
Width 24mm (0.94 inch)
Material: Stainless steel + resin
Battery: 1 x 18350 / 18650 ( Not included )
Max Power: 30W ( 18350 battery ) / 80W ( 18650 battery )
Input Voltage: 3.3 - 4.2V
Resistance Range: 0.5 - 3ohm ( 18350 battery ) / 0.3 - 3ohm ( 18650 battery )
Thread: 510
Colours/ Silver with Red, Blue or Green Resin Sleeve/ Black with Red, Blue or Green Resin Sleeve
___________________________________________________________________
The Takit Mini V2 Various Parts
The device consists of the top section which houses central 510 threading and unscrews from the main battery tube, looking inside this top section we can see a Mosfet fitted and looking down the 510 thread we can see the positive contact, on the side of this section we have a clear fire button. The battery tube is 2 sections screwed together and the bottom of the lower section protrudes to 24mm in diameter to match the top section while the rest of the tubing is 22mm in diameter to allow the Resin sleeve to take the diameter to 24mm. The battery cap screws into the base of the bottom tube internally rather than threading onto the outside. You receive 2 different size Resin sleeves as the top section can be screwed just to the bottom tube section to shorten the device to accommodate an 18350 battery. You also receive a 24mm decorative ring with protruding loop to allow the fitting of the supplied chain lanyard if you wish, this just gets fitted over the top of the device and when an atomizer is installed it secures the ring in position.
___________________________________________________________________
18650 or 18350 Mode
The device comes set-up to use with a 18650 battery but can be shortened to use with a 18350 and become a mini tube. The top section with fitted Mosfet screws off the top tube section which now allows the 18650 Resin sleeve to be pulled off, it is quite tight as we have a series of 4 o-rings (2 on each tube section) so the sleeve doesn't free spin. When removing the top section it is possible for the Mosfet to become dislodged and the fire button to fall out, not a big issue but you just need to be aware so you don't lose the fire button.
You could now if you wanted screw the top section back on and have a Silver (or Black) look or the top tube can be unscrewed from the bottom tube before then screwing the top section back on to have a Silver (or Black) look in 18350 mode.
Included is a shorter Resin sleeve so when the top tube is removed this can be slid over the bottom tube before screwing the top section back on so we know have a Resin look 18350 tube device.
___________________________________________________________________
Fitting The Battery
When in 18350 mode i used an EXO 18350S battery which is rebranded by many companies and can be found under the following:
Vapcell 18350/1100mAh/10A
Aspire 18350/1200mAh/10A
The battery cap screws internally into the threading and once the thread is caught then i must say the threading is very smooth. On the inside of the battery cap negative is clearly marked, so good job there. Once the battery cap is screwed back in place you can turn the centre section of the cap to slacken or tighten on to the battery for the perfect fit, Good job all round!
___________________________________________________________________
Review Continued Below: