Become a Patron!

Cool Vapor Stan 200W & Rebirth 25mm Style RTA

Jane_Qiu

Silver Contributor
Member For 3 Years
Unlisted Vendor
$33.99 Authentic Cool Vapor STAN 200W VW Variable Wattage Box Mod
33af794ef8.jpg.240x240.jpg
f0ca5b0e4e.jpg.240x240.jpg
db3d4610a5.jpg.240x240.jpg

Features
Material: Zinc alloy + PC
Input voltage: 6.6~8.4V
Battery: 2 x 18650 batteries not included)
Power range: 5~200W
Voltage output range: 1V~8.0V
Quiescent current: below 50uA
Operating modes: 1. Power mode; 2. Voltage mode; 3. Mechanical mode
Resistance range of atomizer: 0.1~3 ohm
Display: 0.96 color screen with a black frame to avoid light-leaking
1. Functions of Keys
A. Press the "POWER" key for 5 consecutive times to power on or power off. The interface "COOLVAPOR" appears upon powering on; and the green light flashes for 3 times. "CHIPS BY SEVO" appears upon powering off.
B. Press the "POWER" key for 3 consecutive times to switch among power mode (to set the output power), voltage regulation mode and mechanical smoke mode.
C. Long press the "POWER" key to suck the smoke away; the white light flashes; the maximum heating time is 10s, after which the heating is stopped automatically with a prompt "Over time 10S".
D. Simultaneously press "+" and "-" to lock or unlock the keys. "KEY LOCK" appears when the keys are locked and "KEY UNLOCK" when they are unlocked. In case of any key operation when keys are locked, "Please Unlock" appears to prompt to unlock.
E. Press "POWER" and "-" to set the number of smoke suction port by pressing + or - when the number flashes. Short press the ignition key to confirm. If the number is 0, the number of ports is not limited. "Puff Limit" appears to prompt the excess of the number set.
F. Red light and red font on the display screen indicate abnormalities.
2. Intelligent Protection Functions and Prompts
A. Load short-circuit protection Shorted
B. Low load resistance protection: Low Resistance
C. High load resistance protection: High Resistance
D. Overtemperature protection: "Too Hot!" appears when the internal temperature of the circuit is too high; in such case, wait several seconds to let temperature go down before continuing to use.
E. Battery reverse connection protection: Battery reverse connection does no harm to the product, but it cannot be powered on.
F. Low battery voltage protection:
When the battery voltage is below 6.6V, no discharge operation is allowed. In such case, "Please Charge" is displayed when pressing the POWER key.
G. High battery voltage protection: When the battery voltage is detected to be
higher than 8.4V, it is deemed as abnormal power supply. In such case, "High Voltage" is displayed when pressing the POWER key.
In case of poor battery performance or long-time high-power continuous discharge, the battery voltage will be too low. "Weak Battery" appears to stop discharge at this moment.

$9.9 Vazzling La Le Dripper Style 316SS RDA w/BF Pin
df7e92b806.jpg.240x240.jpg
fa7ec53b80.jpg.240x240.jpg

Features
Drip tip 510
Dual coil building deck
Adjustable airflow control

$10.99 Rebirth Style 25mm RTA

1dd57a94fd.jpg.240x240.jpg
be9bc3359f.jpg.240x240.jpg
267af9b869.jpg.240x240.jpg

Features
Material: Stainless Steel
Deck: Dual Post Build Deck
Refill: Top filling
Drip Tip: 810 Widebore Resin Drip Tip
Thread: 510 thread
2 Post build deck with gold plated positive post
Quarter turn top fill
2ml with straight glass and 5ml with bubble glass
7.5mm coil cutting tool
810 Cobra drip tip and 810 frosted drip tip included

$21.99 Authentic ThunderHead Creations THC Tauren Tool Kit Elite V1 - Screwdriver + Pliers + Scissors + Tweezers + Coiling Jig

99f7df4400.jpg.240x240.jpg
6089f5ce64.jpg.240x240.jpg

Package Included
1* Professional Screwdriver (125mm length, with PH00/2.5/H1.27/H1.50 bits)
1* Coil Brush
1* Folding Scissors
1* Ceramic Tweezer
1* Pointed Tweezer
1* Wire Cutter
1* Coiling Jig Stick (1.5/2/2.5/3/3.5)
1* Storage Case
1* Buckle
1* Mini Screwdriver
 

VU Sponsors

Top