CoilART LUX 200W Kit vs VOOPOO Drag 2 177W Starter Kit, Which is Better?
CoilART LUX 200W TC Kit
The CoilART LUX 200W TC Starter Kit is an exemplary vape system from CoilART, combining functional features with beautiful aesthetic design elements and high performance chipset to pair with a flavorful mesh tank that stands tall amongst the competition. Crafted from durable zinc alloy, the Lux Kit chassis is durable enough to withstand light to moderate drops and falls. The magnetized side panels are formed from reinforced UV-printed glass panels to add a luxurious design element and can be removed on either side. In addition, the CoilART Lux Starter Kit comes ready to match wire resistances in temperature control mode or can be used as a simpler sub-ohm vape by setting the desired wattage. Unlocking a range of 5-200W, the CoilART Lux calls upon the proprietary EAGLE Chipset within to reach resistances as low as 0.05ohms. Featuring spring loaded self-adjusting battery contacts and exquisite visually striking glass inlays, this starter kit embodies the balance between luxury and performance.
Specification:
Mod:
Mod size: 89 x 53 x 25mm
Powered by 2 x 18650 batteries (NOT INCLUDED)
Output wattage: 5~200W
Resistance range: 0.05~3.0ohm
Output mode: VW/TC-Ni/TC-Ti/TC-SS
TC range: 95~315'C / 200~600'F
Reinforced glass panel with UV Printing
510 spring loaded connector
Self-adjusting battery contact
Chip Updatable & Host DIY
Tank:
Diameter: 24mm
Overall height: 50mm
810 drip tip compatible
5.5ml juice capacity with bubble tube
Installed with single mesh M1 coil (0.15ohm, 50~90W, best 60~80W)
one extra quad mesh M4 coil (0.15ohm, 80~150W, best 100~120W)
Resin cover construction
510 threading connection
Click to buy CoilART LUX 200W Kit with code CK20
VOOPOO Drag 2 177W Starter Kit
VOOPOO Drag 2 Starter Kit is upgraded version of Drag kit. With curve surface and round corners design, the Drag 2 offers a comfortable hand feeling to you. 8 kinds of colorful resin panels makes the drag 2 stand out from others. It equips with 32 bit US Gene Fun Chip from the world's largest provider of eCig chips. The Drag 2 comes with innovative FIT mode to intelligently match and protect tanks from burnout. It is powered by dual 18650 batteries and support 177W max output. The mod equips with a crystal OLED display to show parameters of device such as mode, resistance, voltage and wattage. Paired with New Uforce T2 tank, the Drag 2 kit will provide better vaping experience. The tank utilizes new N3 mesh coil to achieve purer flavor and stronger clouds.
Specifications:
Dimensions: 81.5*48.5*25.5mm
Power Range:5W - 177W
Tank Capacity: 5ml
Resting Current: ≤10uA
Output Voltage: 0V - 7.5V
Output Current: 0A - 40A
Battery: Dual 18650 Batteries
Resistance Range: 0.05Ω - 5.0Ω
Temperature Range: 100-315°C/ 200-600°F
Weight: 178(±2)g
Tank Material: Stainless Steel
Mod Material: Zinc Alloy & Resin
Click to order VOOPOO Drag 2 177W Starter Kit code CK20
Check more vape deals in Holiday Vape Sale
CoilART LUX 200W TC Kit
The CoilART LUX 200W TC Starter Kit is an exemplary vape system from CoilART, combining functional features with beautiful aesthetic design elements and high performance chipset to pair with a flavorful mesh tank that stands tall amongst the competition. Crafted from durable zinc alloy, the Lux Kit chassis is durable enough to withstand light to moderate drops and falls. The magnetized side panels are formed from reinforced UV-printed glass panels to add a luxurious design element and can be removed on either side. In addition, the CoilART Lux Starter Kit comes ready to match wire resistances in temperature control mode or can be used as a simpler sub-ohm vape by setting the desired wattage. Unlocking a range of 5-200W, the CoilART Lux calls upon the proprietary EAGLE Chipset within to reach resistances as low as 0.05ohms. Featuring spring loaded self-adjusting battery contacts and exquisite visually striking glass inlays, this starter kit embodies the balance between luxury and performance.
Specification:
Mod:
Mod size: 89 x 53 x 25mm
Powered by 2 x 18650 batteries (NOT INCLUDED)
Output wattage: 5~200W
Resistance range: 0.05~3.0ohm
Output mode: VW/TC-Ni/TC-Ti/TC-SS
TC range: 95~315'C / 200~600'F
Reinforced glass panel with UV Printing
510 spring loaded connector
Self-adjusting battery contact
Chip Updatable & Host DIY
Tank:
Diameter: 24mm
Overall height: 50mm
810 drip tip compatible
5.5ml juice capacity with bubble tube
Installed with single mesh M1 coil (0.15ohm, 50~90W, best 60~80W)
one extra quad mesh M4 coil (0.15ohm, 80~150W, best 100~120W)
Resin cover construction
510 threading connection
Click to buy CoilART LUX 200W Kit with code CK20
VOOPOO Drag 2 177W Starter Kit
VOOPOO Drag 2 Starter Kit is upgraded version of Drag kit. With curve surface and round corners design, the Drag 2 offers a comfortable hand feeling to you. 8 kinds of colorful resin panels makes the drag 2 stand out from others. It equips with 32 bit US Gene Fun Chip from the world's largest provider of eCig chips. The Drag 2 comes with innovative FIT mode to intelligently match and protect tanks from burnout. It is powered by dual 18650 batteries and support 177W max output. The mod equips with a crystal OLED display to show parameters of device such as mode, resistance, voltage and wattage. Paired with New Uforce T2 tank, the Drag 2 kit will provide better vaping experience. The tank utilizes new N3 mesh coil to achieve purer flavor and stronger clouds.
Specifications:
Dimensions: 81.5*48.5*25.5mm
Power Range:5W - 177W
Tank Capacity: 5ml
Resting Current: ≤10uA
Output Voltage: 0V - 7.5V
Output Current: 0A - 40A
Battery: Dual 18650 Batteries
Resistance Range: 0.05Ω - 5.0Ω
Temperature Range: 100-315°C/ 200-600°F
Weight: 178(±2)g
Tank Material: Stainless Steel
Mod Material: Zinc Alloy & Resin
Click to order VOOPOO Drag 2 177W Starter Kit code CK20
Check more vape deals in Holiday Vape Sale