Hey guys. This time I'm gonna introduce a new vape mod from Vapor Storm-the Subverter. It is a beautiful little mod with hollow side panels which make it extremely lightweight. At my first glance, I was attracted by it and I think you'll love it. Ok, let's check it out.
The Vapor Storm Subverter Mod can output up to 200W with dual 18650 batteries. There is a 0.96in colour screen on the side along with the USB port, adjustment buttons, and fire button. The side panel pulls off to access the battery compartment. There is apparently a 5V/1.5A fast charging capability which promises to balance charge the batteries – i.e. make sure both are charged equally.
However, as with all removable batteries, it is recommended to use a good quality external charger and be aware of battery safety. Looking at the dimensions on the specs this should be able to use up to a 27mm diameter tank – but some of the 3D effects on the side panels may be included in the 27mm width. There are plenty of features in this toy like mod – Variable Wattage, Temperature Control, TCR and adjustable power curves too.
[Parameters]
Material: ABS plastic
Size: 90.2x55x27mm
Battery: dual 18650 battery(not included)
Voltage range: 0.5V-8.0V
Resistance range: 0.05-3Ω(power mode); 0.05-1Ω (TC mode)
Coil supporting: Kanthal, Ni200, Ti, SS, etc
Wattage range: 5.0W-200W
Temperature range: 100-300°C (200-600° F)
Fast balance charging: DC 5V/1.5A
Screen: 0.96in colour screen
Mode: VW, TC, TCR, adjustable power curves
Wanna have a try? Get it here: https://vapesourcing.com/vapor-storm-subverter-mod.html
The Vapor Storm Subverter Mod can output up to 200W with dual 18650 batteries. There is a 0.96in colour screen on the side along with the USB port, adjustment buttons, and fire button. The side panel pulls off to access the battery compartment. There is apparently a 5V/1.5A fast charging capability which promises to balance charge the batteries – i.e. make sure both are charged equally.
However, as with all removable batteries, it is recommended to use a good quality external charger and be aware of battery safety. Looking at the dimensions on the specs this should be able to use up to a 27mm diameter tank – but some of the 3D effects on the side panels may be included in the 27mm width. There are plenty of features in this toy like mod – Variable Wattage, Temperature Control, TCR and adjustable power curves too.
[Parameters]
Material: ABS plastic
Size: 90.2x55x27mm
Battery: dual 18650 battery(not included)
Voltage range: 0.5V-8.0V
Resistance range: 0.05-3Ω(power mode); 0.05-1Ω (TC mode)
Coil supporting: Kanthal, Ni200, Ti, SS, etc
Wattage range: 5.0W-200W
Temperature range: 100-300°C (200-600° F)
Fast balance charging: DC 5V/1.5A
Screen: 0.96in colour screen
Mode: VW, TC, TCR, adjustable power curves
Wanna have a try? Get it here: https://vapesourcing.com/vapor-storm-subverter-mod.html