temp control

Hi, I've been doing a solid few days of research. My current favorite look and accessory wise is the Nova 200w mod. I do not need the wattage though, is likely enjoy to sit around 475f. Having as much control as possible over the voltage, wattage, and temperature and even the certain physical...

Perfect MTL setup, temp control is quite easy once you get used to control board, or just use in wattage mode. Dicodes Dani Extreme V2 in good condition. Internally perfect, steel exterior shows scuffing from keys/coins in pocket. Screen is perfectly intact. Includes 18500 and 18650 adaptor...

Let's get the photos out of the way first. Beauty shots, photos of all the panels and size comparisons A gif of a different set of hand checks So this mod was the most excited I've felt about a mod in a very long time. It looks freakin' beautiful, is regulated, supports 21700 and it's cheap...

Hello fellow vapers, I am in desperate need of help as a noob vaper. I've recently switched from Vaporesso NRG tank to Merlin Mini RTA. My Mod is Vaporesso Revenger. I want to use that setup in Temp Control and/or Wattage mode with SS316L coils. Bought 4 spool of SS316L wires(28ga single wire...

hey guys i am a big cloud chaser. i love my flavor builds but i like to keep a cloud build ready for fun. im always looking for a better build and have built on both mech and regulated mods. i have built with both kanthal and nichrome. i recently bought 550 ft of assorted ss316L wire (22-36...

Hi all, I finally crossed the line from MTL setups to sub-ohm vaping, using temp control (as I also did with MTL). I'm having an issue with one of my setups, here are the specs: I have 2 identical setups. They are both Joyetech Egrip2 mods, using Cubis Pro tanks, and .25ohm BF SS3316 Notchcoils...

Is there a rule of thumb for stainless steel temp control settings? What's the highest temp safest to vape?

I have been using my Evic VTC Mini for 9 months now and have never had any issues up until this point. I have always used nickel coils but only had titanium left on hand so that is what I have in there now. Since I put in and primed my new coil it no longer allows me to use the temp control. I...

hi,vapers,the newest laisimo v80 80w touch screen tc box mod in stock now,black and red colors available,only $48 per set. the new laisimo tc mod max output 80watts,support resistance as low as 0.05ohm, support kanthal,NI200,TI,SS and DIY vape wires,built-in 2600mah battery and 1.3inch touch...

I just bought a new H-Priv Pro kit which has a TFV8 Big Baby tank included along wih a V8 Baby-X4 (0.15ohm quadruple) core preinstalled and another V8 Baby-T6 (0.2 ohm sextuple coil) in the box. The documentation is a bit sparse, and I've searched through the web and can't seem to find a...

Hi, im a beginner and planning to buy Eleaf Istick Pico 75W. Can someone please let me know if Eleaf EC Head Atomizer Coil 0.3ohm will be good enough for temperature control or the best coil that can be used for temperature control? I want thick clouds and good juice. (I have heard Stainless...

Good Day fellow Vapers!! I'm looking for a sub-ohm tank/sub tank/clearomizer (or what ever you guys called it) that is most suitable or recommended for vaping in temp control mode (TC Mode). I have been using plenty of tanks and RDA with my FINDER 133. And am currently in love with my TFV8...

Hello. I've been vaping on Kanthal for years. For the holidays I was given a Sigelei 66 with TC. It suports Ni200, SS and TI. I was also given several spools of 28g nichrome wire for the temperature control. I immediately wrapped a coil and stuck it into my RDTA. The instructions said to set...

Hi i am pretty new to temp control vaping and i have seen that on my mod (iStick TC 100W) the build of parallel 316l ss spaced 0.2 ohm at around 255C is the same as a parrallel 316l ss 0.4 ohm non spaced at 130C.Is this normal or is it a problem with my mod. The results ar on a tcr value of 92...

Trying to use the temp control feature of my ipv5. My wife bought me the uwell crown tank which is supposed to be temp control ready. Only issue I'm having is I can not find a straight forward answer on how to properly set it up. The issues I'm having so far are little to no vapor production and...

HCigar VT75 - Evolv DNA75 18650/26650 (26650 included) Can take either an 18650 (with included sleeve) or 26650 battery. Price: $50 shipped PayPal only, Please. No mention of Ecigs.. Very light ring around 510, barely noticeable. Mod is 9/10 condition. I have over 85 transactions on ECF with...

Has anybody tried the tfv8 on a 50 watt? I haven't got it yet, but I went ahead and ordered a bunch of 26awg Kanthal since the coils on this thing apparently only just barely works with 50w, but that's just word of mouth to me as of yet. I got two 50w batteries the BEC pro by Smok and the...

Recently I just purchased a new mod for myself, the Wismec rx 200 with the new Aspire Cleito 120 tank .16 coil. I've never vaped over 50 watts and notice whenever I vape 115 on wattage mode my setup gets warm, not hot, but it tends to make me uncomfortable. I've seen some videos about temp...

Sure, it's only 100 watt mod but I think this needs to be in my collection. I'm not big on internal battery mods but this just looks awesome. The Brit Beast tank will use the Smok Baby Beast coils. http://www.smoktech.com/kit/g100-kit

Hello, hoping you all can help me with something, maybe a problem, maybe not. I've contacted the company and they responded, but I want to check with the community. This is my new setup: Vaporflask Classic by Vape Forward Sense Herakles Plus sub ohm tank .2ohm Ni coils Vape to Lung Firing at 43...

When SMOK came out with the H-Priv in three color options I purchased all three because....well....because I wanted them. I've been real happy with these three. NOW they have created three more. (Just don't get confused with the regular, mini, and micro versions) Sure, it is simply a different...

HI, I am fairly new to building decks. I have been using contact coils in single wire, twisted and clapton wires (all kanthal). I recently got a TC Mod. I bought some SS316L wire in 24, 26 and 28ga. I did some research (Youtube) and most people say to use spaced coils and not contact coils...

Hello guys how you doing..So I'll be a bit straightforward,about 2 weeks a go i got a tesla nano 100 steampunk and a new tsunami rda..Really smooth,not that great battery life but still decent. Yesterday i put it on charging over night and i go in the morning to unplug it and it showed like...

hi,guys,yesterday smoktech launched newest temp control bluetooth box mod xcube ultra. Package: 1*x cube ultra mod 1*USB cable 1*user manual 1*spare parts Specifications: Colors: black,silver,white Material: zinc alloy Output:6-220w Temp control range:200-600F Size:94*55*25.5mm Thread: 510...

laisimo L3 is newest touch screen tc box mod,max output 200watts,support resistance as low as 0.05ohm, TI,NI200,SS,PWR,TCR output modes avaliable,temp control range from 212F to 572F,with multi-functions to protect vape safe.vapers can download the laisimo l3 app on google store,vapers can...

I have a brand new, never used Innokin Cortex kit for $40 shipped. This was opened just to check functionality of the mod. I'd prefer Paypal friends and family. Evic mini sold locally

I'm sure a lot of you have seen the review of the 213 by DJLSB; spoiler alert, the results were not so good. The main flaw that stood out to me was the assertion the 213 does not do proper TC. On my 213, I only use the 316L pre installed profile and have not had any issues. I can vape my RDA's...

Clearing out some items that I do not need. Not interested in trades unless you have a Minikin in superb condition. Here's what I've got -Tesla Nano 100watt TC, like new $35 -Kamry 60w TC color screen(new unused) $30 -Kandy Pen 30w mod(new in box) $17

I'm using an XCube II, but this question is applicable to all variable mods that have the ability to set coil resistance, be they voltage, wattage, or temp control. My mod rarely reads coils at their stated resistance (ohm) rating. They almost all come in a little over or under where the...

hi,guys,today got the eleaf istick 200w mod,black,white and grey avaliable, the new eleaf temp mod made of zinc alloy,max output 200watts,support resistance as low as 0.05ohm,powered by 3pcs 18650 batteries,with 510 thread. recommend work with smok tanks. new eleaf istick 200w mod only $39.9...

Today smoktech released the newest TC vape kit smok h-priv,the kit include mciro TFV4 tank and h-priv tc box mod,max output 220watts,support resistance as low as 0.06ohm at temp control mode,powered by 2pcs 18650 batteries,silver,black and white colors avaliable.

Hello Vaping Underground I have a question regarding my TFV4 I was wondering, if I could use my quad coil for temp mode ? I have a Koopor plus 200W mod, if that makes a different :-) Cheers

hi,vapers,eleaf istick 200w tc mod released, the new eleaf tc mod have three different colors avaliable, max output 200watts,powered by three pieces 18650 batteries. support resistance as low as 0.05ohm,temp control range from 200F TO 600f. with 510 thread. Size:57*37*84mm Output modes...

I'm going to be getting some SS 316L wire for my Bellus RTA soon. So first off, will that work in the SS316 mode on the Evic mini? If so, it would negate the second question I have... Second, if it won't work, how do I set the TCR values in the mod so it will work? I'm sick of the delicate...

I don't know if anyone has had hands-on with the Sigelei 213W, but just in case, I have some questions: 1. How does the chip fare vs the DNA 200 in the TC arena? 2. Is there a button "lock" to prevent accidental up/down button presses? 3. When is the estimated release date/period? I am looking...

Does anyone know where I can find the (pink) kangertech ssocc SS316L coils that are made with SS wiring? I am trying to use the SS316 Temperature Control setting on my Evic VTC and cannot find these coils anywhere. I do not like the Nickel ones and all the other ones are either nichrome or clapton.

I count myself as an experienced vaper for 3 years plus now. Plenty of experience with mods and building coils and all that good stuff. I've always stuck with kanthal up to now for my ADVs. I've dabbled with Nichrome 80 when the fancy has taken me but I've always steered away from TC coils...

hey gals/guys, I recently posted a semi-lengthy three about a new Kangertech TCP build that I was toying with the last couple weeks, I don't wanna clog up the post with a quite since it was so pic heavy, but here's a link and a pic...

My newest review is out! Here is the link, please enjoy and let me know if you find it helpful. http://vapingcheap.com/kangertech-kbox-200-review/ As always, constructive criticism is welcome! --Dev

Hello all, I think l might have a issue with my Evic VTC mini in SS temp control. It seems that it never hits the temp I set it for. I have it set between 450-480 and as I watch the screen while vaping it, the temp will fluctuate right below what I have it set for. No matter how high I set my...

Everytime I put a dual coil build on my device, it switches from temp control to power mode. Can anyone give me any insight? I'm pretty novice when it comes to vaping in general. so any tips will help me out.

Hi! So here's my situation. I run the iSub Apex top fill tank, and I love the tank itself, but I want to upgrade my mod (Istick 50w) to the new Ktech platinum w/ temp control. My questions are as follows. 1. Can I keep running my current tank with a different coil for temp control? If so...

So I have a spool of Ni200 lying around (I think 26ga), and a bunch of various gauges of Kanthal too. 1. Would I be able to Clapton Kanthal with Ni200 and run it in Power Mode? 2. Would it be possible to Clapton Kanthal with Ni200 and run it in TC? (I have a feeling you can't, and I know Ni200...

I have just done a bit of research on the KBOX 200 and it looks pretty awesome. One feature it supports that I have never seen before is temp control for NiChrome. It supposedly works pretty well. I was wondering if there are any other mods (that are already released or soon to be released)...

hi,vapers,smok r80 tc box mod in stock on smokstore.us, we have black,silver and white colors in stock. only $49.9 with free shipping. the link is : http://www.smokstore.us/smok/Smok-R80-TC-Box-Mod

Hello all, I just received my new TFV4 and it works great on my IPV3 Li but as soon as I put in a titanium coil (stock) in it, it gives me a "Dry coil, No liquid" message, I tried using a different Ti coil with the same results, I pre wicked the coils. I re installed the new firmware...

KANGERTECH SUBOX MINI 50W - $70 SIGELEI 75W TC - $75 SIGELEI 150W TC- $130 available on our website. thedripsupplyco.com

just bought the sx mini ml class. i noticed there's this option in the setting call "temperature compensate". can anyone explain to me what does it mean or do?

Wismec RX200 is newest wismec reuleaux series mod,this new mod built-in wismec own chip, max output 200watts,support TI,NI,SS and vw modes,powered by three pieces 18650 batteries. the wismec reuleaux rx200 with temp control function,temp control range from 200F to 600F. the wismec RX200 with...

IPV D3 is newest pioneer4you tc box mod,built-in YIHI SX150H chip, the IPVD3 temp control mod max output 80watt,support resistance as low as 0.05ohm, powered by 1pc 18650 battery,four different colors available. now pre-order on smokstore.us only $64.5 with free shipping. Product link: IPV D3