Become a Patron!

resistance

  1. vaperman1555

    Coil ohm help

    Hello. im thinking about buying an ijoy capo squonker kit, with a 21700 or 20700 battery. what ohm should i have on the coils for best clouds?
  2. D

    suggestions on best triple 18650 mods?

    so looking online is literally the worst due to all the ad's, and clones, etc. im looking for a nice 3 battery mod that i can run in the 100-150 watt range regulary. im building .19 coils currently and like them quite a bit, (i would never run my tank atty's at that, they just can't handle it)...
  3. VapeMate

    Calculating r/cm for Tiger wire

    Hello guys, I've recently got some new wires.I'm trying to calculate resistance per cm of this tiger wire from VapeThink can anybody guide me on this? P.S.: i don't have any ohm-meter and i don't have my vv mod(which has an ohm-meter) for a while, so i need to calculate the resistance manually
  4. Astray

    You MUST never build it too low, but what about higher ohm?

    Hi, as I am learning extensively and diligently about safety, ohm's law, battery quality and performance, coil building, resistance, battery's amp discharge rate (from the famous Mooch), and the whole realm of unregulated mod safety rules... I have a good understanding on the minimum ohm that...
  5. Tintin

    VGOD pro mech mod lowest ohm?

    Hello, ive recently bought a VGOD pro mech with Lg hd2 25Amp battery, and i am wondering what the best Resistance i can build with to get good cloud production but still good flavor, and without damaging the battery.
  6. Tintin

    How to calculate coil resistance and wattage

    Hello, Im not very experienced with building coil and calculating everything, therefore im asking here for guidance, so im gonna use this coil with 0.05 resistance and i got 2 batteries(40A pulse and 32A continuous) and 3.7V batt, thats almost everything i need to know, but im curious what watt...
  7. N

    Minimum Resistance Question

    I have just gotten a starter kit Kangertech Subox Mini-C and put a Baby Beast tank on it. My wife's baby beast tank came with a higher ohm coil in it, but mine has a .15 ohm coil in it. Now, the mod specs say that the minimum resistance is .3 ohms. So, my question is, what might the consequences...
  8. TheLabRat

    Resistance Help/Advice Please

    I make my own fused Claptons 2*28/34 Nichrome 80 8 wrap around a 2.5mm bit. Im Using a hexohm 3.0 and like to build around a .3. So here is my question This is the reading from my Cartel This is the reading from my LMC Box And this is the reading from my ohm reader Which should or what is...
  9. VapeMate

    Rebuilding CE5

    Hey everybody i'm newbie here and to the vaping i just got my ego ce5, i couldn't find anything better around me i've been using it for a while, i faced some leakings probably because of overfill, or maybe i made a bad liquid anyway i've took it apart and cleaned it all.while cleaning i saw my...
  10. V

    IPV5 200W TC Mod = Tiger Coil (Kanthal) 0.3Ω ±0.05 (60-80W)

    So my friend has had this vape for some time now. I am extremely frustrated at his irresponsibility in knowing absolutely nothing about this rig, or vaping in general. For the longest time it has been used and we both do not understand anything about settings. I have tried before to do the...
  11. axolote

    Resistance Problem i think..

    Hello i'm new to vaping... so im jumping straight to the problem just fixed my resistance of my eleaf ijust 2 the thing is it works just when i loose the resistance and then start to tight it up.. in some point it finds a way to work for just 1 second then i stop pressing the botton and wont...
  12. Paratech

    Testing Resistance - Who to Trust?

    Not too long ago I decided to start building coils. I've been paying close attention and been doing my research. Not doing anything complicated yet. Verified all connections are solid and nothing not where it shouldn't be. (coil not touching sidewall or anything) Everything has been going ok and...
  13. D

    Wattage Safety for my set up?

    Hello All, I have a Kbox 200 with a mutationx v2 with a dual coil setup. I wrapped 32g hanthal clapton wire 5.6 times on a 2.5 mm coiler. My ohms are reading at .23 on my kbox display. My batteries are samsung-25R. What is the maximum wattage I should use in order safe? I am a bit of a RDA/RBA...
  14. KingClouds

    Im so confused..... help

    Hey everyone! So i recently purchased the Smok H Priv and put on the Indulgence Mutation X V4S RDA. I am new to building coils and wanted something that will tell me what my coils need to be vaped at (wattage). So does the H Priv really help you? and what is resistance lock? From what ive heard...
  15. W

    Problem with SS coils in TC mode (TobBox Mini)

    Hello guys, So first Of all Im new to vaping. I got my first mod (Topbox Mini) a couple weeks ago and I've been vaping in TC mode with a Nickel coil at about 450-480 degrees fahrenheit. Today I decided to change my coil as my juice was apparently dissapearing so I put this new SS coil that came...
  16. The Juice Loosener

    VW Mod Coil Reading Question

    I'm using an XCube II, but this question is applicable to all variable mods that have the ability to set coil resistance, be they voltage, wattage, or temp control. My mod rarely reads coils at their stated resistance (ohm) rating. They almost all come in a little over or under where the...
  17. The Juice Loosener

    New Aspire Cleito 0.27-ohm Coil

    Okay, pardon me for asking the obvious, but they've already got 0.2- and 0.4-ohm Kanthal dual Claptons. What is the point in making a 0.27, especially when its wattage range is already completely covered by the 0.4? Why not branch out further and try an SS or a TC coil? It's probable that this...
  18. H

    Aspire CF G Power Battery coil resistance!

    Hi! If you're reading this, thanks already! I have this aspire CF G Power Battery along with the K1 Glassomizer. I am currently using 1.6 ohm coils, what I wanna know is if I can go lower? Can I rebuild a coil which is say 1.0 ohm? Will it work with the G Power? What's the lowest I could go...
  19. Cudge82

    Twisted kanthal for cores on fused clapton?

    I only have 32gauge kanthal. Was thinking of grabbing 2 or 3 bits and twisting it then doubling it over and wrapping woth the 32. Would i run into any issues here? Would it be possible to get up near 1 ohm this way? Thanks.

VU Sponsors

Top