Want more vapor!

samooo1994 · Mar 22, 2015

I just got a nemesis mod clone with a freakshow RDA, I GOT 28 gauge kanthal wire, what diameter and coil would be best for vapor?

Plus how long does a efest 18650 2100mah battery take to charge? Left it for a few hours but light was still red?

Whiskey · Mar 22, 2015

Moving thread to correct area

samooo1994 · Mar 22, 2015

Whiskey said:
Moving thread to correct area

What do you mean?

M5amhan · Mar 22, 2015

bigger coil = best for vapor. 2.5mm and up holds a lot of juice

2000-2500mah at 1 amp takes about 2-3 hours

Whiskey · Mar 22, 2015

samooo1994 said:
What do you mean?

You posted the thread in the forum request area, I moved it to where it would get seen better

samooo1994 · Mar 22, 2015

M5amhan said:
bigger coil = best for vapor. 2.5mm and up holds a lot of juice

2000-2500mah at 1 amp takes about 2-3 hours

I'm using 28 kanthal and going 2.5mm atm but I'm not getting huge dense clouds? How many wraps should I do?

M5amhan · Mar 22, 2015

dual coil? do about 6 wraps, even space them if you like for more surface area. have to get your watts up using 28g and a mech mod

samooo1994 · Mar 22, 2015

Yeah man I done dual coil 6 wraps :/ but still no massive dense clouds

egomama · Mar 22, 2015

what pg/vg ratio juice are you using?

M5amhan · Mar 22, 2015

sounds like you want lower gauge wire, try 26 and 24. for now just try less wraps or even smaller coil to get your ohms lower

^^ also good point could be you need thicker juice

scarecrowjenkins · Mar 22, 2015

Surface area is your friend. Wrap your coils parallel, it'll give you the surface area you want while keeping the resistance low. The greater the surface area, the more vapor you'll get. Just stay within the safety limits of the battery and don't build lower than your knowledge on the subject would permit

Want more vapor!

VU Sponsors