The official VAPE MAIL!!!!!!! thread #2

gsmit1 · May 26, 2020

ChainVapeS said:
A 21700 will fit in these flashlights.

Creature0069 said:
So will a pair of 18350's.

They will? I didn't even think to try. I have 8 unidentified 18650s I took out of a laptop battery pack. They hold voltage fine, but are not suited to vaping at all. A regulated mod says no. However they work great in these flashlights

We use one all day in drop ceilings pulling network cable and they barely get below 4 volts. Higher capacity, lower current.

gsmit1 · May 26, 2020

Wb80 said:
I grabbed when they had a 30% off sale wich i also stacked another 10% off code i found. But hell id pay full price in comparison to using less quality wire. One of our vu builders turned me on to kp(as it is all they use) and ive bought nothing but since.

I do have some Lightning Vapes and Temco wire too. Temco is great for Titanium and LV (now the Optim thing) has some irresistible sales as well sometimes. KP is a level up though. Even their spools are heavy duty and wound flawlessly every time on top of the pristine wire. That last order is on the way now. I think I have 12 spools coming.

My second order from them a couple years ago I accidentally chose ribbon instead of round for one of the spools. I caught it like an hour later and called them up right away not really hoping for much.

Dustin got on the phone and told me he couldn't change an order once finalized. But he said, he could cancel the order, make the change and apply the funds to the new order. I told him that would be great except the difference was like 4 bucks and how would I get it to him? He told me not to worry about it. "No big deal. I'll make the change now and you'll see it in your account in a little while."

Seriously?

How many companies are going to eat any loss when it's the customers fault and then do all the work to get the order changed? First customer service impressions like that stick around. I've had to call and email for different reasons a few other times too. Always treated like a king.

Ms. Trixy · May 26, 2020

EdwinBetz said:
Compliments of @DonBaldy .... Looks even better in my hand with Yoda next to the squonk bottle! The pictures in the post did this setup no justice at all... Absolutely stunning, and I'm not usually an orange person.

This purchase is worth any grief I het from the wife for getting another high end vape!

Sent from my LGL722DL using Tapatalk

That is amazingly stunning! Wow, Edwin. I have a Luxotic 200W Kit, semi-mech coming. I didn't realize the ability to turn it into a mech until after I ordered it and did some research. It does series and parallel. Too scary for me. It's red and yellow resin panels. Has the Guillotine RDA and matching tip.

MrMeowgi · May 26, 2020

ChainVapeS said:
Lol. Free, working, pretty bright flashlight will not go in the trash until it breaks or stops working! I live in the sticks. Gets dark out here. It's nice to have 2 or three flashlights in every room of the house.

Sent from my SM-N950U using Tapatalk

I'm out in the woods myself. Those lights come in handy even if just to get the neighbors kids out my house after dark. Lol

nadalama · May 27, 2020

~Don~ said:
Top and right...

And I don’t hate everything my goodness...

I just did exposed architectural hvac for decades...

Go out to eat and I’m looking at the exposed duct work criticizing how the installers couldn’t get things level or fitted perfectly...unable to twist spiral to where the joints seem seamless...etc.

So when I saw that mod the first time with a tank on it....crooked and every same mod with a tank thereafter...crooked

Sent from my iPad using Tapatalk

I see things like that, too, all the damn time.

There is a heating vent in my bathroom that is squirrelly. Every time I see it, it makes me cringe.

Many (MANY) 510s are off-kilter. I notice them all the time in my tanks and RDAs. I also notice it when drip tips don't sit exactly straight.

nadalama · May 27, 2020

Ms. Trixy said:
That is amazingly stunning! Wow, Edwin. I have a Luxotic 200W Kit, semi-mech coming. I didn't realize the ability to turn it into a mech until after I ordered it and did some research. It does series and parallel. Too scary for me. It's red and yellow resin panels. Has the Guillotine RDA and matching tip.

That's the Luxotic NC, correct? Just hang on. That thing will blow yer hair back. Seriously. Was too much for me!

I PIF'd one and passed the other along to my son, who has basically no hair (and no fear)! lol

nadalama · May 27, 2020

What I came here to SAY, and y'all got me all distracted....

Wismec Luxotic MF from Cigabuy (FINALLY!), plus another iJoy Avenger tank and a Joyetech eVic VTC Mini kit from Wetvapes, showed up today.

I couldn't decide what mod to use the Avenger tank on, and what RDA to use on the Lux MF, so I decided to just use the MF as a regular mod instead of a squonker. It's nice because there's a removable panel, and if you leave it in place, you don't see the squonk bottle.

That combination works like a charm. I love it. Also the Lux MF feels great in the hand, has just enough weight to feel substantial (running one 20700 battery), and running in mech mode with a 0.26 ohm N80 26ga parallel coil in the RBA in the Avenger, produces a very responsive and flavorful vape. I filled the tank with my DIY Lemon Sandy (my take on DLLT) and I am set.

I'm leaving the Joyetech MTL tank in the box, and using the mod with a Crown Mini that I got a few weeks back. Right now it has a factory coil in it which is kinda meh (although once it gets warmed up, I reckon it's ok), but I have an RBA waiting in the wings, for when I get up the nerve to try to build it. It's about like the RBAs for these damn AIOs we've all been messing with lately. T-I-N-Y!!! Have to wait for a good-eyes day!

nadalama · May 27, 2020

MrMeowgi said:
I'm out in the woods myself. Those lights come in handy even if just to get the neighbors kids out my house after dark. Lol

I got one flashlight from them. DH happened to be standing here when I opened the box. His eyes lit up, he said, "What's that?!?" I handed it to him, and haven't seen it since. lol

You guys are so easy. :teehee:

MrMeowgi · May 27, 2020

nadalama said:
I got one flashlight from them. DH happened to be standing here when I opened the box. His eyes lit up, he said, "What's that?!?" I handed it to him, and haven't seen it since. lol

You guys are so easy.

PaulS · May 27, 2020

Stoked. All I have in the house is mech tubes and bomber mosfets. Really wanted a regulated to build on. So my friend sent me this oldie but goodie:

gsmit1 · May 27, 2020

nadalama said:
I got one flashlight from them. DH happened to be standing here when I opened the box. His eyes lit up, he said, "What's that?!?" I handed it to him, and haven't seen it since. lol

You guys are so easy.

It has a clicky button and it lights up. We're powerless.

nadalama · May 27, 2020

gsmit1 said:
It has a clicky button and it lights up. We're powerless.

PaulS · May 27, 2020

gsmit1 said:
It has a clicky button and it lights up. We're powerless.

exactly. i'm in.

Ms. Trixy · May 27, 2020

nadalama said:
That's the Luxotic NC, correct? Just hang on. That thing will blow yer hair back. Seriously. Was too much for me! I PIF'd one and passed the other along to my son, who has basically no hair (and no fear)! lol

It is the NC 250W! I'm glad you told me it would blow my hair back! I wasn't going to try it anyway. Way too scary for me.
For you mech guys, Cigabuy has the yellow/green with lots of other colors in the resin plus the RDA for $19.99.
I'll have the red/yello resin soon if interested. Same price.

On another note, it's been a very sad vape mail month for me. Nothing in the last month and 10 items are lost at sea {sigh}. I feel as though I should buy something from a US vendor just to get vape mail! Hmmm. Maybe I will if the price is right.

gsmit1 · May 27, 2020

Ms. Trixy said:
I feel as though I should buy something from a US vendor just to get vape mail!

I regret to report that that may not be the reprieve you're hoping for. USPS could lose a package at sea if it was shipped from Rapid City to Omaha.

gopher_byrd · May 27, 2020

I have 3 of those lights from Liion, one on my nightstand, one in my office, and the third is on the dining room table where I work in the summer since it's cooler than my office. I have some older smurf blue Samsung 25R's in mine. If you haven't figured it out the light has 3 functions, on, strobed, and SOS that are squenced by multiple button presses.

gsmit1 · May 27, 2020

gopher_byrd said:
If you haven't figured it out the light has 3 functions, on, strobed, and SOS that are sequenced by multiple button presses.

Quite so. I did figure that out.

dubya314 · May 27, 2020

Liquid Barn order came. Not much, just some needs

Huckleberried · May 28, 2020

And signed by Mr. @wllmc, himself! :blowkiss:

wllmc · May 28, 2020

Huckleberried said:
View attachment 161836

And signed by Mr. @wllmc, himself!

View attachment 161837

f1r3b1rd · May 28, 2020

Huckleberried · May 28, 2020

f1r3b1rd said:
View attachment 161874

That's purty!

Jinx'd · May 28, 2020

@Roundhouse hooked me up with a gallon (sold out online) Thanx !
and i have a @wllmc and Roundhouse autograph ! forgot to put in pic

and not only that, they threw in some munchies !!!

Huckleberried · May 28, 2020

That made me laugh out loud. Cat gets hold of those and has a ball, but I have to take them away from him.

Jinx'd · May 28, 2020

Huckleberried said:
That made me laugh out loud.

my mission is complete :bingo:

ProlineVaper · May 28, 2020

Ms. Trixy said:
That is amazingly stunning! Wow, Edwin. I have a Luxotic 200W Kit, semi-mech coming. I didn't realize the ability to turn it into a mech until after I ordered it and did some research. It does series and parallel. Too scary for me. It's red and yellow resin panels. Has the Guillotine RDA and matching tip.

Send me some pics when you get it, I might take it off your hands if you want to get rid of it.

Sent from my LGL722DL using Tapatalk

ProlineVaper · May 28, 2020

Just a few thinhs today... Some resale items from EJS, an order from 2Fdeal, and an order from Vapeyaya. Tje Purge is a clone, but still sweet as hell!

Sent from my LGL722DL using Tapatalk

b.m. · May 28, 2020

EdwinBetz said:
Just a few thinhs today... Some resale items from EJS, an order from 2Fdeal, and an order from Vapeyaya.

So how long did your Vapeyaya order take to arrive?I placed an order with them,it shipped 4/13 and i still don't have it yet,so just curiuos to see if i may even be close to seeing it yet haha.

MrMeowgi · May 28, 2020

b.m. said:
So how long did your Vapeyaya order take to arrive?I placed an order with them,it shipped 4/13 and i still don't have it yet,so just curiuos to see if i may even be close to seeing it yet haha.

I think we were looking at the same time. You still haven't gotten that gyre Av yet? I didn't order one.

~Don~ · May 28, 2020

This came in today, Ultem Nightmare RDA.

UK to Me in 2 days

Vapes nice, but have to tear into the contacts and posts and strip/polish them.

3.73v out of the bag... .11v lower than the Asgard

Think I’ll order one of those Odin250Cs in Red for $144 and pair it and not worry about the whole polishing

I just hate RED... Black I would of just paid on the spot rather than debate

Sent from my iPhone using Tapatalk

Huckleberried · May 28, 2020

This arrived today. Don't laugh at my Cool Fire 1. I always loved those, and this one was $5. Looks like a mini light saber with my Clone Dvarw 16. I love it, LOL. Need to get a couple new 18350 batts, though. Been a long time since I had one of those. The eVic VTC mini was my first ever box mod, and used to be my absolute fave. I wore it out. Love the pearly white powder coat, so smooth. Then the Destiny, I saw @Just Frank talking about, so I picked that up, too.

b.m. · May 28, 2020

MrMeowgi said:
I think we were looking at the same time. You still haven't gotten that gyre Av yet? I didn't order one.

I knew there was someone looking around the same time,but couldn't remember who it was.No sign of it yet.The last scan was 5/10 which says it left the origin country,but nothing since then.

MrMeowgi · May 28, 2020

b.m. said:
I knew there was someone looking around the same time,but couldn't remember who it was.No sign of it yet.The last scan was 5/10 which says it left the origin country,but nothing since then.

That sucks

MrMeowgi · May 28, 2020

Some coils and pods for the wocket pod. Sucks I had to buy the pods to be able to add the pack of coils to my cart and have a shipping option. Maybe they have a minimum order amount. Just thought of that one.

Jinx'd · May 28, 2020

MrMeowgi said:
Some coils and pods for the wocket pod. Sucks I had to buy the pods to be able to add the pack of coils to my cart and have a shipping option. Maybe they have a minimum order amount. Just thought of that one.

dig'n the new avatar

casketweaver · May 28, 2020

Did someone say big baller thread?...

No, kidding. Anyone have any input on ordering directly from Lostvape?

Have to order my girl a new box, because her DNA 250C screen shit the bed. And of course, the screws in the mod don't come out, so... That means I can't just rebuild it, yet.

Sent from my Pixel 3 XL using Tapatalk

Nailz · May 28, 2020

Can't turn down a sale on dinner lady lemon tart

MrMeowgi · May 28, 2020

Jinx'd said:
dig'n the new avatar

Thanks man. @JuicyLucy found it for me a while back and I found it again today at work. I love it

Just Frank · May 28, 2020

Huckleberried said:
This arrived today. Don't laugh at my Cool Fire 1. I always loved those, and this one was $5. Looks like a mini light saber with my Clone Dvarw 16. I love it, LOL. Need to get a couple new 18350 batts, though. Been a long time since I had one of those. The eVic VTC mini was my first ever box mod, and used to be my absolute fave. I wore it out. Love the pearly white powder coat, so smooth. Then the Destiny, I saw @Just Frank talking about, so I picked that up, too.

View attachment 161904

I hope you love it! I like to raise my coil ever so slightly and get really great flavor. There's not many new single coil RTAs coming out this year. Thankfully Hellvape made one that performs well.

Huckleberried · May 28, 2020

Just Frank said:
I hope you love it! I like to raise my coil ever so slightly and get really great flavor. There's not many new single coil RTAs coming out this year. Thankfully Hellvape made one that performs well.

Good advice, I'll keep that in mind, thanks! The threading is buttery smooth. Hoping to set it up tomorrow.

ProlineVaper · May 28, 2020

b.m. said:
So how long did your Vapeyaya order take to arrive?I placed an order with them,it shipped 4/13 and i still don't have it yet,so just curiuos to see if i may even be close to seeing it yet haha.

I ordered on 4/7/20 and recieved it today (5/28) so approximately 6 weeks.

Sent from my LGL722DL using Tapatalk

Vape Fan · May 28, 2020

casketweaver said:
Did someone say big baller thread?...

No, kidding. Anyone have any input on ordering directly from Lostvape?

Have to order my girl a new box, because her DNA 250C screen shit the bed. And of course, the screws in the mod don't come out, so... That means I can't just rebuild it, yet.

Sent from my Pixel 3 XL using Tapatalk

What mod is it.
Seems there would be a way since they had to assemble it.
No warranty? Tried calling Evolv?

casketweaver · May 29, 2020

Vape Fan said:
What mod is it.
Seems there would be a way since they had to assemble it.
No warranty? Tried calling Evolv?

Lost vape triade project sub-ohm edition

Sent from my Pixel 3 XL using Tapatalk

Vape Fan · May 29, 2020

casketweaver said:
Lost vape triade project sub-ohm edition

Sent from my Pixel 3 XL using Tapatalk

Evolv is known for being easy to get along with in situations like needing a screen.
And they answer their phone.

gsmit1 · May 29, 2020

casketweaver said:
Did someone say big baller thread?...

No, kidding. Anyone have any input on ordering directly from Lostvape?

Have to order my girl a new box, because her DNA 250C screen shit the bed. And of course, the screws in the mod don't come out, so... That means I can't just rebuild it, yet.

What mod is this that you can't get the screws out?

b.m. · May 29, 2020

EdwinBetz said:
I ordered on 4/7/20 and recieved it today (5/28) so approximately 6 weeks.

Sent from my LGL722DL using Tapatalk

Cool thanks.Mine was a few days later than yours,so hopefully i'll see it next week then.

casketweaver · May 29, 2020

gsmit1 said:
What mod is this that you can't get the screws out?

Triade DNA250C. The screws are stuck - tried every tool I have (yes, including the torx set), to no avail. All it did was strip the heads.

Sent from my Pixel 3 XL using Tapatalk

~Don~ · May 29, 2020

It arrived

Now to find the squonk pin... it’s probably with the other 22 in storage lol

Cause it looks good like this too

Sent from my iPhone using Tapatalk

nadalama · May 29, 2020

EdwinBetz said:
Just a few thinhs today... Some resale items from EJS, an order from 2Fdeal, and an order from Vapeyaya. Tje Purge is a clone, but still sweet as hell!

Sent from my LGL722DL using Tapatalk

Dibs on that Reactor if you decide to sell it. Don't know why I've not ordered one by now. Idiocy, I guess.

Have you tried it yet?

CaFF · May 29, 2020

~Don~ said:
It arrived

Now to find the squonk pin... it’s probably with the other 22 in storage lol

Cause it looks good like this too

Sent from my iPhone using Tapatalk

Love the OG Goon, and both of those mods.
My authentic Goon is currently on a Hohm Wrecker...bad in black baybee...

The official VAPE MAIL!!!!!!! thread #2

The Vapin' Drummer

Senior Moderator

Senior Moderator

Senior Moderator

Senior Moderator

The Vapin' Drummer

Senior Moderator

Cranky Old Fart

https://cookingwithlegs.com/

The Vapin' Drummer

The Vapin' Drummer

The Vapin' Drummer

FUCK the FDA

The Vapin' Drummer

_evil twin_

_evil twin_

Senior Moderator

VU Sponsors