The Official #HandCheck Thread

Pastorfuzz · Nov 24, 2019

gadget! said:
I put 2 mesh strips in the reckoning...
Holy Crap, this thing is angry!

Sent from a Galaxy far far away!

I've got some of those coming next week. I was thinking the same thing as i have some mesh rolls and that clamp system looked inviting.. For some reason they didn't ship with my last order but they did get them out Friday. Cant wait to try them.

c.diehl · Nov 24, 2019

MrMeowgi said:
Woo-hoo

Is that a v1 door on the v2?

Sent from my PH-1 using Tapatalk

c.diehl · Nov 24, 2019

Jinx'd said:
that stab made me forget

View attachment 150263

How did you polish it so clear?

Sent from my PH-1 using Tapatalk

MrMeowgi · Nov 24, 2019

c.diehl said:
Is that a v1 door on the v2?

Sent from my PH-1 using Tapatalk

Yes sir

marter · Nov 24, 2019

Rhianne said:
My drivers today. On a snuggly blanket. Sniffle.

Freemax Fire Luke Mesh tank on a Twister mod.

Freemax Fire Luke 2 tank on a Cube mod.

Aspire Mini Nautilus on a Tesla Punk 86. My favorite MTL setup for nic salts.

Hmmm....a blanketcheck? Thought this was the handcheck thread.

Wb80 · Nov 24, 2019

marter said:
Hmmm....a blanketcheck? Thought this was the handcheck thread.

Lol. I do table checks usually.

bx10r · Nov 24, 2019

Hanging my hero this rainy sunday...

Sent from a very cloudy room

Rhianne · Nov 24, 2019

marter said:
Hmmm....a blanketcheck? Thought this was the handcheck thread.

It’s a snuggly blanket, though.

Jinx'd · Nov 24, 2019

dig'n this

Theboss · Nov 24, 2019

Poor quality pics, but put some Aliens in the Rebirth that was a gift from @DonBaldy with the SQ217 I bought from him and yeah, for a dual coil RDA the flavor is really good. I'm a flavor chaser so single coil small chamber rda's are my preferred vape, about once a week I like to throw a dual coil set up on a mod just for a change and this one will be in the rotation with the Goon and Kali.

bx10r · Nov 24, 2019

Theboss said:
Poor quality pics, but put some Aliens in the Rebirth that was a gift from @DonBaldy with the SQ217 I bought from him and yeah, for a dual coil RDA the flavor is really good. I'm a flavor chaser so single coil small chamber rda's are my preferred vape, about once a week I like to throw a dual coil set up on a mod just for a change and this one will be in the rotation with the Goon and Kali.

View attachment 150365 View attachment 150366

Try running the rebirth single...youd be surprised.

Sent from a very cloudy room

Theboss · Nov 24, 2019

bx10r said:
Try running the rebirth single...youd be surprised.

Sent from a very cloudy room

I wondered about that, maybe a 4mm id?

bx10r · Nov 24, 2019

Theboss said:
I wondered about that, maybe a 4mm id?

Big rda. Big id....i cant find pics of mine but heres my coil yodas...

Sent from a very cloudy room

Theboss · Nov 24, 2019

bx10r said:
Big rda. Big id....i cant find pics of mine but heres my coil yodas...

Sent from a very cloudy room

Damn those are nice! What do they ohm out at?

marter · Nov 24, 2019

bx10r said:
Big rda. Big id....i cant find pics of mine but heres my coil yodas...

Sent from a very cloudy room

So how are you wicking that in single coil mode?

bx10r · Nov 24, 2019

Theboss said:
Damn those are nice! What do they ohm out at?

Knowing him...prob .1

Sent from a very cloudy room

bx10r · Nov 24, 2019

marter said:
So how are you wicking that in single coil mode?

I turned mine a bit...trying to find my pics

Sent from a very cloudy room

Theboss · Nov 24, 2019

Theboss said:
Poor quality pics, but put some Aliens in the Rebirth that was a gift from @DonBaldy with the SQ217 I bought from him and yeah, for a dual coil RDA the flavor is really good. I'm a flavor chaser so single coil small chamber rda's are my preferred vape, about once a week I like to throw a dual coil set up on a mod just for a change and this one will be in the rotation with the Goon and Kali.

View attachment 150365 View attachment 150366

On a side note with this SQ, I've been so Ant happy for about two months I'd forgotten how much harder the SQ217 hits. I've been building at .2 on my VA and just put the Entheon with that build on the SQ and holy cow! I think I used to build at .35 single coil on the 217 for this reason. I still love my Ant, but the spring loaded 510 vs the fixed 510 is the only difference and it makes all the difference!

bx10r · Nov 24, 2019

Mod switch since little brother's not allowed to be in the house

Sent from a very cloudy room

Theboss · Nov 24, 2019

bx10r said:
Mod switch since little brother's not allowed to be in the house

Sent from a very cloudy room

Wait, who's not allowed in the house? I'm lost, lol

bx10r · Nov 24, 2019

Theboss said:
Wait, who's not allowed in the house? I'm lost, lol

My pulse 80 doesn't leave the house..ots special..custom doors in honor of my little brother

Sent from a very cloudy room

Theboss · Nov 24, 2019

bx10r said:
My pulse 80 doesn't leave the house..ots special..custom doors in honor of my little brother

Sent from a very cloudy room

Gotcha, I should have put that together from your hand check earlier.

My son recently entered the forces up here, I know the pride that comes with having a family member serve.

bx10r · Nov 24, 2019

Theboss said:
Gotcha, I should have put that together from your hand check earlier.

My son recently entered the forces up here, I know the pride that comes with having a family member willing to serve.

Well thank him for me....u should be proud. Im damn proud to have been his older brother...wish i was half the man he was when he gave his life for this country...

Sent from a very cloudy room

marter · Nov 24, 2019

Givin' the LV Drone and Glaz a little love. Man I really like this squonker.

Theboss · Nov 24, 2019

bx10r said:
Well thank him for me....u should be proud. Im damn proud to have been his older brother...wish i was half the man he was when he gave his life for this country...

Sent from a very cloudy room

I didn't realize he passed, I'm sorry for your loss man

bx10r · Nov 24, 2019

Theboss said:
I didn't realize he passed, I'm sorry for your loss man

Thanks bro....1 mth after his 21st bday in 2007..he was just a kid...but all man

Sent from a very cloudy room

Theboss · Nov 24, 2019

bx10r said:
Thanks bro....1 mth after his 21st bday in 2007..he was just a kid...but all man

Sent from a very cloudy room

Damn, that's how old my son is....I couldn't imagine. Way too young.

GeNomeZ · Nov 24, 2019

Just got this one Friday...

Jinx'd · Nov 24, 2019

i've started using mine. this Kali, oh-boy, take about airy ! i have it down to 1 hole. the real problem, flavor is kinda low. but then perhaps i am spoiled by the Profiles.

c.diehl · Nov 24, 2019

Jinx'd said:
dig'n this

View attachment 150352

How did you get your door so clear I need to know! Lol

Sent from my PH-1 using Tapatalk

Vape Fan · Nov 24, 2019

marter · Nov 24, 2019

Jinx'd said:
i've started using mine. this Kali, oh-boy, take about airy ! i have it down to 1 hole. the real problem, flavor is kinda low. but then perhaps i am spoiled by the Profiles.

View attachment 150382

I run the Kali with slightly less than 2 holes (it whistles a little with 2 full holes) and it's one of the best flavor RDAs I have. I like it so much I bought 4 clones. Not sure what the difference is in our builds. And yes, I have (and like) my Profile. Hmm.

gadget! · Nov 24, 2019

Sent from a Galaxy far far away!

marter · Nov 24, 2019

gadget! said:
Sent from a Galaxy far far away!

Is that picture reversed or is it a left-handed squonker? Is that the way the Dot Mods are?

Theboss · Nov 24, 2019

I have a blue top cap coming

Jinx'd · Nov 24, 2019

marter said:
I run the Kali with slightly less than 2 holes (it whistles a little with 2 full holes) and it's one of the best flavor RDAs I have. I like it so much I bought 4 clones. Not sure what the difference is in our builds. And yes, I have (and like) my Profile. Hmm.

i am a coil :zombie:

. so, fused 3x 28ss 36ss 3mm 5 turns.

i just looked through the holes. i think i may have the coils to high. bottom half of coils are seen

Theboss · Nov 24, 2019

Theboss said:
I have a blue top cap coming

View attachment 150389

Does anyone know how to buff fine scratches out of delrin? This one has some on the back.

bx10r · Nov 24, 2019

marter said:
Is that picture reversed or is it a left-handed squonker? Is that the way the Dot Mods are?

Mech squonk holes are on the right..100s on the left

Sent from a very cloudy room

Jinx'd · Nov 24, 2019

marter said:
Is that picture reversed or is it a left-handed squonker? Is that the way the Dot Mods are?

not reverced = read the battery

gadget! · Nov 24, 2019

marter said:
Is that picture reversed or is it a left-handed squonker? Is that the way the Dot Mods are?

That's the way the DotMods are.

Sent from a Galaxy far far away!

Jinx'd · Nov 24, 2019

Theboss said:
Does anyone know how to buff fine scratches out of delrin? This one has some on the back from being a display model

scratches ? or scuffs ? mine had scuffs on it, prolly same for yours. take a wash rag, like for your face or, ummm, .......nevermind.
put a little juice on it, then rub Forest rub ! "up & down" ONLY.

Theboss · Nov 24, 2019

Jinx'd said:
scratches ? or scuffs ? mine had scuffs on it, prolly same for yours. take a wash rag, like for your face or, ummm, .......nevermind.
put a little juice on it, then rub "up & down" ONLY.

Yeah, my bad, they're more like scuffs. I'll give that a try. Thanks!

marter · Nov 24, 2019

Jinx'd said:
i am a coil . so, fused 3x 28ss 36ss 3mm 5 turns.

i just looked through the holes. i think i may have the coils to high. bottom half of coils are seen

I've got several in play, but one of my favorites is a pair of James Mucklin's 3x28g/36g Ni90 aliens, 3.0mm 5 wraps, ohms out at 0.10 running at 85w. It's my Corn Bread Puddin' vape, if that tells you anything.

marter · Nov 24, 2019

Jinx'd said:
not reverced = read the battery

Now that you mention it I did read the battery label. Duh.

Theboss · Nov 24, 2019

Jinx'd said:
scratches ? or scuffs ? mine had scuffs on it, prolly same for yours. take a wash rag, like for your face or, ummm, .......nevermind.
put a little juice on it, then rub Forest rub ! "up & down" ONLY.

Wow that worked like a charm, thanks man! I was worried when it dried the scuffs would show again, but nope.

@bx10r take note, although never used, I think the red one had the same thing. If I knew about this juice trick I'd have cleaned it up before shipping.

Jinx'd · Nov 24, 2019

marter said:
I've got several in play, but one of my favorites is a pair of James Mucklin's 3x28g/36g Ni90 aliens, 3.0mm 5 wraps, ohms out at 0.10 running at 85w. It's my Corn Bread Puddin' vape, if that tells you anything.

well, i'm liking it well enough = i want to cause it looks like it was made for it. but i would like to "really" like it.

the auth, is the black barrel plastic ?

Theboss · Nov 24, 2019

Jinx'd said:
well, i'm liking it well enough = i want to cause it looks like it was made for it. but i would like to "really" like it.

the auth, is the black barrel plastic ?

The black is steel in my Kali V2 kit

Jinx'd · Nov 24, 2019

Theboss said:
Wow that worked like a charm, thanks man! I was worried when it dried the scuffs would show again, but nope.

@bx10r take note, although never used, I think the red one had the same thing. If I knew about this juice trick I'd have cleaned it up before shipping.

View attachment 150390

right on Bro

. how i found this out = i put this skull sticker on mine. only about half off it stuck, so i peeled it off. well some of the glue stuck like a MF'r ! so i tried this and it worked. it actually looks better than an unmessed up finish, but the same.

Jinx'd · Nov 24, 2019

Theboss said:
The black is steel in my Kali V2 kit

how about your clones ? mine, if i put a strong led flashlight to it, i can see through it.

Theboss · Nov 24, 2019

Jinx'd said:
how about your clones ? mine, if i put a strong led flashlight to it, i can see through it.

I don't have a clone of that one. The inside of my black barrel is stainless.

There's someone on here who has the authentic and a couple of clones and mentioned that he can't tell the difference.

Maybe @marter ?

The Official #HandCheck Thread

The Vapin' Drummer

-DIY-demon-

_evil twin_

"The Trader"

"The Trader"

VU Sponsors