Become a Patron!

What did you do today that is vape related?

nadalama

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
I tried and tried to get my son on those KF4s, since he likes big air and big clouds, but he says they're not airy enough! :facepalm: I really liked my old KFL+'s, but once i got spoiled on my Achilles attys, I couldn't even use the KFL+'s -- though I did get an authentic Svoemesto last year, so if my Achilles became unusable, I'd probably try to get back to my KFL+'s. For a tank type, they're probably the best I've used, and DAYUMM the threading on that authentic Svoemesto is like pure silk.

Andria

Not sure you could get "big air" out of a KF4, even at its airiest. It sounds like our sons have somewhat similar inclinations in vaping - mine wants to fill up a room with vapor with a hit or two.

I had one dry hit during the night on the KF, just enough for me to still not have any confidence in it. In my mind, the vape isn't good enough for me to keep fooling around with it much longer. It's good, but certainly not better than a dozen other atties I have around here. Life's too short.

I don't mind fooling around with stuff a little bit, in order to learn. But I want to learn, remember, and move on to something else. No need to have to keep on and on fucking around with one thing. It shouldn't be that hard, and I'm not incompetent. :)

It's like I used to tell my son: if you have trouble with one thing, it could be you, or it could be the other thing. If you have trouble with everything, then the trouble is you. I don't have trouble with everything, so dammit, it ain't me. lol
 

nadalama

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
I am still putting stuff away. According to the boxes that are still sitting around, I have two mods and 13 atomizers to go. I have to admit that I do not know where all those atomizers are. I have most of them. Have run across a Kabuki that I don't have a box for, no idea what happened to that. I have not been very organized with my vape stuff. Can you tell?

Found my X-Baby today and am going to rehab it and see if I can do anything with the top so that it doesn't come open. Worst case I could just use it at home.

Charged some batteries and put a married set into my iStick TC 100W that I haven't used for a while. The TC on it sucks, but otherwise it's a nice mod. I like the firing bar on it. I decided to do that because I now have that Hurricane Jr that is 22mm. I am enjoying it a lot, and not all that many 22mm tanks around here these days, so it's a good opportunity to use the iStick.
 

Tornadoalleydeb

Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Made a bunch of juices for my daughter to test........Found 2 she enjoys ( she's extremely picky ) having her living with us again (temporarily) is already taking a bit of a toll. LOL Sigh.............mama......mama.........mama..........I need this, or that, and do you have this and and ..........OMG............HA HA Also played around with some older tanks I had that are more MTL style to see if she would like to use any of those. Nope. She does like her little Nord I got her though.

I also discovered I should not reply to forum threads here when I am in a shitty mood. Meh, my bad. Time for a really deep vape, ya you know the kind. Where you draw forever.......................:)
 

PoppaVic

Gold Contributor
Member For 4 Years
Well, I successfully got the PWM in the defunct SXK Boxer squonk. Polarity is right, (duh), switch and pot work, 510 works... However, it looks like I go back inside tomorrow and work out how the hell to reroute the silicone wiring so the bloody battery-sled and case all fit proper. ah-well, one step at a time..
 

AndriaD

Yes, I DO wear a mask! I'm vaccinated, too!
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
Not sure you could get "big air" out of a KF4, even at its airiest. It sounds like our sons have somewhat similar inclinations in vaping - mine wants to fill up a room with vapor with a hit or two.

I had one dry hit during the night on the KF, just enough for me to still not have any confidence in it. In my mind, the vape isn't good enough for me to keep fooling around with it much longer. It's good, but certainly not better than a dozen other atties I have around here. Life's too short.

I don't mind fooling around with stuff a little bit, in order to learn. But I want to learn, remember, and move on to something else. No need to have to keep on and on fucking around with one thing. It shouldn't be that hard, and I'm not incompetent. :)

It's like I used to tell my son: if you have trouble with one thing, it could be you, or it could be the other thing. If you have trouble with everything, then the trouble is you. I don't have trouble with everything, so dammit, it ain't me. lol

My spawn usually saves his "competition cloudz" for when he's hanging with his 2 best friends, both of whom also vape; he says when they're playing their Pathfinder game (a DnD thing apparently), they manage to fog up the entire glassed-in porch at his friend's house where they play. Sometimes he'll blow a big cloud at me just for shits and giggles -- *I* don't care, but I notice he doesn't ever do that to his dad. :teehee: He doesn't vape much when we're all watching TV together, just because of the cloud problem, and how it can irritate his dad if he can't see the TV. :D He's also responsible with his clouds when he's driving -- when he first switched to max-VG (PG makes him cough), he could see right away that he had to open the window a bit, and lately he's been vaping his Vuse Alto a lot, since he really likes the Vuse's "rich tobacco" flavor, and since it seems to be about 50/50 PG/VG, it's not at all the same kind of cloud producer. I'm just glad he's found another way to be happy with vaping, just in case the damn FuckingDumbAsses decide to do something truly fascist about vaping.

Andria
 

Jinx'd

Platinum Contributor
Member For 2 Years
Looks great! How do you do the railing? A sprayer?

I sprayed the whole thing. the decking and railings are actually different. decking = semi. rails and posts solid, solid because they had a bunch of old stain and a bunch of bare spots = it had to cover 100%.

she, the home owner, told me she would give me $75 to do the railings. I laughed out loud. she said she would do it herself. I said "it ain't that easy". she called back the next day, after trying to do it, and offered $150. some setup, 1/2hr. 2 hours spraying, 1/2hr cleanup.
Cha-Ching $$$ :bingo:
 

Tornadoalleydeb

Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Well, I have rebuilt this KF4 clone and it appears to be working. Sssshhhh! If I don't whisper that, it might hear me. :rolleyes:

I took out the eensy coil that was in it, probably about 1.5mm, and made a 2.4mm 26ga Ni80 that comes out at about 1 ohm. Running it for very restricted DL at 25W.

Keep your fingers crossed for me. Flavor is super good.

Fingers crossed. I looked up what those KF4's looked like. Thought I had one but I guess not. Mine looks like this and I struggled with it and said screw it lol. Any clue what this one is? Stupid fill screw thing on the bottom, it's a pain in the ass. It kept gurgling which is why my daughter didn't like it. Prolly gonna toss the silly thing :) Who needs the frustration right?

IMG_20190804_223219024.jpg IMG_20190804_223031203.jpg
 

PoppaVic

Gold Contributor
Member For 4 Years
Well, I successfully got the PWM in the defunct SXK Boxer squonk. Polarity is right, (duh), switch and pot work, 510 works... However, it looks like I go back inside tomorrow and work out how the hell to reroute the silicone wiring so the bloody battery-sled and case all fit proper. ah-well, one step at a time..
OK, I know I need to resolder 2 batt-springs: they are not allowing me to force them down enough to fully snapshut the shell, but.. Damn, it works... Now I need to fill the unused spaces:
IMG_20190804_151222297.jpg
 

Attachments

  • IMG_20190804_151228945.jpg
    IMG_20190804_151228945.jpg
    699.7 KB · Views: 11
  • IMG_20190804_151238828.jpg
    IMG_20190804_151238828.jpg
    743.6 KB · Views: 10
  • IMG_20190805_093749947.jpg
    IMG_20190805_093749947.jpg
    525.1 KB · Views: 11

IcepickMaker84

VU Donator
Gold Contributor
Member For 4 Years
ECF Refugee
Mixed some juices and then decided I needed some more flavors and placed an order on BCF. Cleaned and rewicked a Pulse v2 to sample a Pop Tart flavored juice I bought. And checked out the Bogan’s new rta, definitely going to add that to my collection...when it’s released.
 
Last edited:

wildgypsy70

“Widgy Pidgy”
Staff member
Senior Moderator
VU Donator
Platinum Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
Rewicked a few atties, tracked a few shipments.....more flavors. Haha. Washed out a few bottles. Tested a few experiments......I think the blueberry butter cake is finally ready for putting out there! Mixed a few new experiments.......
 

The Cromwell

I am a BOT
VU Donator
Diamond Contributor
Member For 4 Years
Gave final rites to a 25R cell that just died. ! yr old..
Going with HG2's here on out they last better than 25R and 30Q in my 4 years of experience.
Put a 4 yr old HG2 in the pico squeeze and it lasted longer than the 1 yr old 25R's.

Yeah I know the HG2 has higher capacity than the 25R. But a 4 yr old HG2?
 
Last edited:

AndriaD

Yes, I DO wear a mask! I'm vaccinated, too!
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
Fingers crossed. I looked up what those KF4's looked like. Thought I had one but I guess not. Mine looks like this and I struggled with it and said screw it lol. Any clue what this one is? Stupid fill screw thing on the bottom, it's a pain in the ass. It kept gurgling which is why my daughter didn't like it. Prolly gonna toss the silly thing :) Who needs the frustration right?

View attachment 143721 View attachment 143722

Looks like a Kayfun Lite -- does it have just one external air hole, on the side of the base? The KF4's have 2. If it had a "hex key" adjustable thingie on the bottom, it would be a Kayfun Lite Plus -- that's the kind of KFs I have.

Andria
 

Tornadoalleydeb

Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Looks like a Kayfun Lite -- does it have just one external air hole, on the side of the base? The KF4's have 2. If it had a "hex key" adjustable thingie on the bottom, it would be a Kayfun Lite Plus -- that's the kind of KFs I have.

Andria
Thanks, just one air hole and no hex key thingy..........it's a POS ............... Prolly a bad clone I bought from way back when. No big deal. I might look at the KF4's a little more, just not sure my daughter would even use it though. Of course I might if you are saying they are a bit airier. I don't mind a Restricted DL and I even like a MTL still at times. I need to make sure I get a good clone this time though. I'm thinking SXK or the YTF deal right?
 

PoppaVic

Gold Contributor
Member For 4 Years
Because of the dearth of all-things-kayfun, anymore - and the fact that almost all kayfun are strictly MTL, I'd just avoid dealing with them anymore - and it hurts me to say that, as I had a pile of parts and finally gave them all away.. I was no longer able to find a KF clone that wasn't crap.

Similarly, I've given up on everything "dual coil" - including "comes with a blocker to make it single-coil".. Yeah, I've a old lappy case full of stuff to PIF or sell-off. I've got two Juggerknot mini's in the pipeline now, and 2 Engine Nano's I totally love. One is a clone due to "disappear", the other is discontinued, and there is nothing else I've seen to bother with except... The Aromamizer Lite - their new Single Coil - is said to be overall wonderful EXCEPT as MTL.
 

Rhianne

Diamond Contributor
Member For 2 Years
ECF Refugee
I did something cool (to me anyways) a little while ago. I had broken a Fire Luke 2 tank by dropping it and was really bummed. I ordered a new one on sale but it still bothered me. So I looked and saw I had an extra bubble glass in the box for it. I got all the broken glass out and put in the new one and it’s working great again!
I know that was a long winded way to say that I fixed my tank, but hey, it was very cool for me!


Sent from my iPad using Tapatalk
 

Tornadoalleydeb

Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Because of the dearth of all-things-kayfun, anymore - and the fact that almost all kayfun are strictly MTL, I'd just avoid dealing with them anymore - and it hurts me to say that, as I had a pile of parts and finally gave them all away.. I was no longer able to find a KF clone that wasn't crap.

Similarly, I've given up on everything "dual coil" - including "comes with a blocker to make it single-coil".. Yeah, I've a old lappy case full of stuff to PIF or sell-off. I've got two Juggerknot mini's in the pipeline now, and 2 Engine Nano's I totally love. One is a clone due to "disappear", the other is discontinued, and there is nothing else I've seen to bother with except... The Aromamizer Lite - their new Single Coil - is said to be overall wonderful EXCEPT as MTL.
Ya, I probably won't bother with one. The new Aromamizer lite is great IF you get the new airflow ring they made for it. With that ring it is a true MTL, without it, nope. Great little tank though. I pif'd mine along with a V2 to someone here as I have more Steamcrave stuff than I will ever need. :) Their new mini glaz which is single coil will be landing soon. That's a very nice little guy
 

Tornadoalleydeb

Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
I just bought 3 LG HG2 brown 3000mah batteries from Liion, since Mooch recommends them. And I got an amazing coffee mug from Dangerous Woman delivered this morning, with their juice bottle artwork on it. It is badass!
That’s all, folks...
awww I wanna see the coffee cup, where's the picture? I love pretty mugs
 

AndriaD

Yes, I DO wear a mask! I'm vaccinated, too!
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
Thanks, just one air hole and no hex key thingy..........it's a POS ............... Prolly a bad clone I bought from way back when. No big deal. I might look at the KF4's a little more, just not sure my daughter would even use it though. Of course I might if you are saying they are a bit airier. I don't mind a Restricted DL and I even like a MTL still at times. I need to make sure I get a good clone this time though. I'm thinking SXK or the YTF deal right?

Well, I haven't personally tried vaping with a KF4, since it was clear to me from looking at it that it would be a lot airier than I can deal with. If you like an "open MtL" or "restricted DtL", then you might like the KF4 a lot. The internal airhole, under the coil, is a bit bigger than on earlier KFs, and it does have the 2 external airholes, rather than just one. Because of the internal airhole being right beneath the coil, the flavor in a KF4 should be pretty good; that's precisely the arrangement I require, bottom-airhole, just for that reason -- the Achilles I use are bottom-air, in fact their entire coil-deck architecture is VERY similar to a Kayfun, but with a little more room to work -- easier to get the leads around the screws.

One thing I've never been able to understand is why my Achilles have so much better flavor than Kayfuns. It was my understanding for quite a while that a small chamber, and a "dome-shaped" interior of that chamber, is why the Kayfuns offered such good flavor. Yet now that I'm so spoiled with my Achilles -- which has a MUCH bigger chamber, the full 22mm, and also rather tall, and the inside isn't dome-shaped at all -- I can't get much flavor from my old KFL+'s at all. It's puzzling.

Andria
 

gadget!

"The Trader"
VU Donator
Platinum Contributor
Member For 5 Years
VU SWAT
VU Patreon
I just bought 3 LG HG2 brown 3000mah batteries from Liion, since Mooch recommends them. And I got an amazing coffee mug from Dangerous Woman delivered this morning, with their juice bottle artwork on it. It is badass!
That’s all, folks...
awww I wanna see the coffee cup, where's the picture? I love pretty mugs
Here's my favorite mug ;)
My daughter gave it to me on Father's Day.
I put a mod next to it so it's "Vape Related" LOL

e60941fa07e39e0b1fbd02fd3bd1c584.jpg


Sent from a Galaxy far far away!
 

Tornadoalleydeb

Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Well, I haven't personally tried vaping with a KF4, since it was clear to me from looking at it that it would be a lot airier than I can deal with. If you like an "open MtL" or "restricted DtL", then you might like the KF4 a lot. The internal airhole, under the coil, is a bit bigger than on earlier KFs, and it does have the 2 external airholes, rather than just one. Because of the internal airhole being right beneath the coil, the flavor in a KF4 should be pretty good; that's precisely the arrangement I require, bottom-airhole, just for that reason -- the Achilles I use are bottom-air, in fact their entire coil-deck architecture is VERY similar to a Kayfun, but with a little more room to work -- easier to get the leads around the screws.

One thing I've never been able to understand is why my Achilles have so much better flavor than Kayfuns. It was my understanding for quite a while that a small chamber, and a "dome-shaped" interior of that chamber, is why the Kayfuns offered such good flavor. Yet now that I'm so spoiled with my Achilles -- which has a MUCH bigger chamber, the full 22mm, and also rather tall, and the inside isn't dome-shaped at all -- I can't get much flavor from my old KFL+'s at all. It's puzzling.

Andria
Thanks. that is interesting. I really like the Squape I have. It's more DL but the flavor from that one is amazing. That's a 22mm and quite tall also. I don't need to try anymore Kayfun things. I have been seeing a lot of folks posting about the Dvarw DL ( I think that is what it's called) and that has peaked my interest.
 

bikerboogieman

Silver Contributor
Member For 1 Year
Well, I went to clean the Serpent Elevate RTA and broke the damn bubble glass....:headbang: The base would not come unattached even after putting it in the freezer for a bit. Ended up using the small glass, re wicked and loaded up Open Road. Now I need to find the replacement bubble glass or this RTA will be designated for home use only. Anyone who knows where to get the replacement glass, preferably from known shops here in the USA, I'd appreciate the tip.
 

Tornadoalleydeb

Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Figuring out what to pack up and possibly sell and what to keep in rotation. Thinking of going down to just 7 total. With the pasito I rarely use more than one mod a day. May be big sales coming
Oh sure, after I have already blown my little allowance for the month HA HA HA ...........Ya cuz I NEED more stuff ( insert sarcasm ) :)


Vape related today. I went through all my Steam Crave stuff to see what all I have. Gave everything a good clean ( not that it was dirty but well I'm like that if they have been in a box for awhile) Made up some more Kings Custard and that's about it I think.
 

nadalama

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
@The Cromwell I pulled my Kanger Kbox Mini Platinum out of the deep freeze this afternoon and put a Hussar RDTA (clone) on it.

I always forget from one time to the next what a nice little box this is. I love the brushed stainless.

It's gotta be at least four years old now, and it works just as well as it did the day I got it. Looks damn near as good as it did when new. One of the best $25 investments I've ever made. :)
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
I ordered 4 30 ml samples for under $5.00 with free shipping from Vape Wild. They came in today, seems they sent some extras as well. Looking forward to trying these out. Also ended up doing an order from Fast Tech for a 5 pack of replacement bubble glass for the Serpent.

View attachment 143843
I love the wrecking ball
 

nadalama

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
Placed my second order with strikesusa.com; this time got a Geekvape Nova mod ($23.85) and an iJoy Captain Elite RTA ($11.25), shipped for $41.63 total. Coupon code STRIKESWEEK10 took an extra 10% off the sale prices. That is a helluva deal.
 

gadget!

"The Trader"
VU Donator
Platinum Contributor
Member For 5 Years
VU SWAT
VU Patreon
I grabbed a Timesvape Ardent RDA from a local B&M.
This thing is awesome!
It's 27mm, has a 510 pin or you can screw the bottom off and take the top ring off of the Dreamer and it screws right into the Dreamer as a hybrid.

c6a947d398b20d803cb297eba52fd532.jpg


Sent from a Galaxy far far away!
 
Last edited:

AndriaD

Yes, I DO wear a mask! I'm vaccinated, too!
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
Well, not today, but yesterday, I finally got my strawberry & cream below 22% flavoring -- currently it's at 21.85%.

Inawera Shisha Strawberry 12.8%
TFA DX Bavarian Cream 4.5%
TFA Vanilla Swirl 3.3%
CAP Sweet Cream 1.25%

My reductions are further apart these days, since I'm finally getting close to my ultimate goal of 20% flavoring. But since getting it to its current level, I estimate that within a year, I could be down to 20% -- possibly by the end of this year, though I cant say for sure. I make my small reductions when it starts tasting too sweet; this most recent reduction has been coming for some time, just not feeling too content with it, but finally I just couldn't stand the ever-more-sweet taste and had to bring it down.

Andria
 

Rhianne

Diamond Contributor
Member For 2 Years
ECF Refugee
Placed my second order with strikesusa.com; this time got a Geekvape Nova mod ($23.85) and an iJoy Captain Elite RTA ($11.25), shipped for $41.63 total. Coupon code STRIKESWEEK10 took an extra 10% off the sale prices. That is a helluva deal.

I checked them out, great prices. Thanks for the heads up. :)


Sent from my iPad using Tapatalk
 

Rhianne

Diamond Contributor
Member For 2 Years
ECF Refugee
I’m getting ready to try my new Fire Luke 2 tank and charging a bunch of cells since I let everything run down a bit. Thank God for backups of backups! So, I’m reading an old John Sanford novel and vaping my cujones off, as it were. :teehee:

I got my new Cube X and am not thrilled with it. So it’ll be a vapocalypse stash mod. I’ll be buying another resin Cube kit, even though I just saw that Rip Trippers recommended it. And enjoying a nice thunderstorm now, really loud and close.
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
I’m getting ready to try my new Fire Luke 2 tank and charging a bunch of cells since I let everything run down a bit. Thank God for backups of backups! So, I’m reading an old John Sanford novel and vaping my cujones off, as it were. :teehee:

I got my new Cube X and am not thrilled with it. So it’ll be a vapocalypse stash mod. I’ll be buying another resin Cube kit, even though I just saw that Rip Trippers recommended it. And enjoying a nice thunderstorm now, really loud and close.
I love the movie Cujo. Not sure what the cujones are. Lmao. Sorry first thought kinda thing.. So no xcube for you huh? Don't like it? Thought about one just for something to buy. Lol
 

Rhianne

Diamond Contributor
Member For 2 Years
ECF Refugee
I love the movie Cujo. Not sure what the cujones are. Lmao. Sorry first thought kinda thing.. So no xcube for you huh? Don't like it? Thought about one just for something to buy. Lol


As for cujones, I thought it was more polite to say than plain ole balls! lol
I was expecting the Cube X to be like the resin one I had, but it’s not really as comfortable to hold. It’s shiny glass too, which I don’t really like either. You might like it as an extra, rainy day kind of mod though. I may return it or just hang on to it as an extra, who knows? It just doesn’t feel as great as the original one I had, even though that’s an internal battery.


Sent from my iPad using Tapatalk
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
As for cujones, I thought it was more polite to say than plain ole balls! lol
I was expecting the Cube X to be like the resin one I had, but it’s not really as comfortable to hold. It’s shiny glass too, which I don’t really like either. You might like it as an extra, rainy day kind of mod though. I may return it or just hang on to it as an extra, who knows? It just doesn’t feel as great as the original one I had, even though that’s an internal battery.


Sent from my iPad using Tapatalk
Ahh Ok different finish. I had a vapresso Revenger that I won from a VU challenge earlier this year. It was the same. Really smooth finish and was almost dropped a few times. I ended up giving it to a vape friend from the factory I work at a couple days a week. Great mod just too slick for my man hands. Rough, calloused. Lol
 

VU Sponsors

Top