Become a Patron!

What did you do today that is vape related?

nadalama

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
Built a CSMNT clone dripper that I got in the Hardware thread from @516_vaper_li (thanks again!)

4mm N80 staged, 2x28/38 Clapton parallel to 24ga N80 round, 5 wraps, 0.33 ohms, wicked with Vapor Storm Cotton King (free sample the vendor sent with a VS Raptor mod I bought from AliExpress). I put a bunch of cotton in the thing. Doused it with my version of Blackberry Breeze (which needs more Breeze, but is good anyhow), and JEEZ LOUISE, I love it! Vaping it at 45W on a black Detonator. Amazing. I might just be willing to drip for this. lol
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
Built the rba for the Smoant Pasito. Thing is tiny. 2.5 mm id. 9 wrap 26g N80. .84 ohms.
ff03df645952375e49654ea767d81d43.jpg
 
Last edited:

The Cromwell

I am a BOT
VU Donator
Diamond Contributor
Member For 4 Years
The STM RBA is just a bit too large to use in place of the Kanger SOCC coils used in some Billet box tanks.
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
The STM RBA is just a bit too large to use in place of the Kanger SOCC coils used in some Billet box tanks.
I've used the kanger rba in a billet before. Was actually a decent vape for what it was. I think with mtl and higher ohm rdl the flavor isn't as pronounced. But less cloud for the flavor I guess. Still better than any tobacco I've ever used.
 

The Cromwell

I am a BOT
VU Donator
Diamond Contributor
Member For 4 Years
I use a 2.5 mm id 5 wrap 26 GA ss317L coil in the STM RBA decks. ~.4 ohms
Been using them daily for around 4 years now.
Same tank but I keep 4 spare RBA decks coiled and wicked. Just like swapping at a factory coil.
Actually been using it daily on the same Kbox mini 50w mod.
Still going strong.
Couple of tanks a day usually
I run the STM wide opan and do a restricted DL.
Been out of MTL for over 4 years now I guess.
Heck I even DL'd cigs.

I only use it and the 23 mm original Merlin. As far as tanks go.
Unless I fire up a Kato Mech then I use an origional Serpent.
 
Last edited:

gsmit1

Platinum Contributor
Member For 4 Years
They had these a while back for 14:99. I waited and they marked them down to half price at which time I grabbed one. The yellow compartments come out and there's more space underneath. Perfect for vape crap.
hqdefault.jpg
Unless my memory is really going, I believe somebody has edited this image :)
 

gsmit1

Platinum Contributor
Member For 4 Years
So it’s really awesome!! And you could get two for the price of one.
When I first posted the pic it didn't have the added graphics and text. Somebody with access to the server backend edited it and readded it to my post. Not that I mind, but they'll fess up sooner or later.
 

Creature0069

VU Donator
Silver Contributor
Member For 4 Years
What is it you're not sure about? Me, I don't like their price tag, but I think it's really nice looking. I'm all about single coil tanks.

My expectations were too high. (Probably because of the price tag). Biggest thing is that I get more flavor from the Zeus X. A few nit picky things like it's hard to tell how much juice is in it with clear juice. (yes, the bubble glass solves that but then what's the point of this tank?) For a single coil tank it's either too airy or with the air cut down, too noisy for my taste. I dunno, I've tried different types and sizes of coils and nothing really made me go "YES! This is it."
I think I'm just spoiled on dual coil tanks now and haven't used a single coil that could get me to stop using kanger subtanks.
If this was the dual coil version, and black, I'd probably like it a lot more but that's just an assumption. ;)
 

nadalama

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
My expectations were too high. (Probably because of the price tag). Biggest thing is that I get more flavor from the Zeus X. A few nit picky things like it's hard to tell how much juice is in it with clear juice. (yes, the bubble glass solves that but then what's the point of this tank?) For a single coil tank it's either too airy or with the air cut down, too noisy for my taste. I dunno, I've tried different types and sizes of coils and nothing really made me go "YES! This is it."
I think I'm just spoiled on dual coil tanks now and haven't used a single coil that could get me to stop using kanger subtanks.
If this was the dual coil version, and black, I'd probably like it a lot more but that's just an assumption. ;)

I'm disappointed to hear that, because I love the look of the Peacemaker so much. But I am almost strictly single-coil and restricted air, and whistling/noise just makes me crazy. So it's better to know and save the money. Thanks.
 

nadalama

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
A couple days ago I ordered this wrap to go on the Minikin Reborn that I just got. I had hoped it would show up today, but looks like it was a couple hours too late getting to the regional center. Should be here tomorrow.

The model I actually ordered was listed as Minikin 1.5. I hope it fits. It's my understanding that the Reborn is physically the same as the V1.5 with the firmware of the V2.

Blue_Fractal_Vapor_skinz_1024x1024.jpg
 

Jinx'd

Platinum Contributor
Member For 2 Years
A couple days ago I ordered this wrap to go on the Minikin Reborn that I just got. I had hoped it would show up today, but looks like it was a couple hours too late getting to the regional center. Should be here tomorrow.

The model I actually ordered was listed as Minikin 1.5. I hope it fits. It's my understanding that the Reborn is physically the same as the V1.5 with the firmware of the V2.

Blue_Fractal_Vapor_skinz_1024x1024.jpg


PLEASE post pics. I am looking for a skin, and I am concerned with the print quality. thanx
 

Tornadoalleydeb

Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
A couple days ago I ordered this wrap to go on the Minikin Reborn that I just got. I had hoped it would show up today, but looks like it was a couple hours too late getting to the regional center. Should be here tomorrow.

The model I actually ordered was listed as Minikin 1.5. I hope it fits. It's my understanding that the Reborn is physically the same as the V1.5 with the firmware of the V2.

Blue_Fractal_Vapor_skinz_1024x1024.jpg
Great colors! Crossing fingers for you that it fits
 

Tornadoalleydeb

Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
PLEASE post pics. I am looking for a skin, and I am concerned with the print quality. thanx
This is a vaporskinz. I have been getting my skins there for years. They give you the option of glossy, matte, and a few other types. I always get the matte. I got the glossy once and it wasn't my thing, bright and vivid though. :)

IMG_20190706_160143831_HDR.jpg
 

nadalama

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
Great colors! Crossing fingers for you that it fits

I should have checked more closely on this. Looks like I won't be able to use part of the wrap, but hopefully the part that covers the battery cover will fit with a little trimming. The battery cover on my mod is scuffed up, so that's the part I really need anyway. I'm glad I ordered the matte finish wrap. Keeping fingers crossed... :)
 

nadalama

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
thanx. does the image look crisp and clear ? in some of their pics the image looks crappy. but that may just be the pic.

The wraps I've bought from jwraps and VaporSkinz have been very good quality: the printing, the adhesive, and the vinyl material itself. Printing is not pixilated. VaporSkinz has a much wider selection, both of designs and of devices.

I did buy one wrap off Amazon, from an outfit I think was called "Smarter Designs" or something like that, and I wouldn't give two cents for their stuff. The wrap I bought from them pulled some of the paint finish right off my mod when I went to remove it. Also printing quality was not up to snuff.
 

Jinx'd

Platinum Contributor
Member For 2 Years
Well, I like them and they seem clear and crisp to me.

great. now the HARD part = picking one I think I will like. I am one of the most indecisive people that there is.
they do not have one cut for my G-Class. I emailed asking if they will sell an uncut sheet. i asked j-wraps. got no reply, F'em.
 

Jinx'd

Platinum Contributor
Member For 2 Years
The wraps I've bought from jwraps and VaporSkinz have been very good quality: the printing, the adhesive, and the vinyl material itself. Printing is not pixilated. VaporSkinz has a much wider selection, both of designs and of devices.

I did buy one wrap off Amazon, from an outfit I think was called "Smarter Designs" or something like that, and I wouldn't give two cents for their stuff. The wrap I bought from them pulled some of the paint finish right off my mod when I went to remove it. Also printing quality was not up to snuff.

thanx for that info, really helps :)
 

VU Sponsors

Top