Become a Patron!

Billet Box Appreciation Thread

robfisher

Bronze Contributor
Member For 4 Years
The Flow V2 is reminiscent of the MF bridge, at least at first look. Are they both rebuildable ? The Boxxer V2 looks interesting but how is the airflow?
Thank you for posting these new "toys".

@BrewBear they are both rebuildable and both have more airflow than other bridges... the Flow has air inserts that will allow an MTL vape as well. The Boxxer is an RDTA that will allow rowdy coils as well and you will fire the BB higher than you ever have before if you want a bigger vape from a BB!

The Flow is similar in design to the Flow V1 and Exocet but has a number of improvements over the Flow V1 like better airflow, better screws, less condensation and an all-around better bridge!
 

BrewBear

Platinum Contributor
Member For 4 Years
@BrewBear they are both rebuildable and both have more airflow than other bridges... the Flow has air inserts that will allow an MTL vape as well. The Boxxer is an RDTA that will allow rowdy coils as well and you will fire the BB higher than you ever have before if you want a bigger vape from a BB!

The Flow is similar in design to the Flow V1 and Exocet but has a number of improvements over the Flow V1 like better airflow, better screws, less condensation and an all-around better bridge!
Thank you for the brief overview, it helps a lot. The only question is how big/small are the inserts for the Flow V2. I use the 1.0 mm inserts in all my Dvarw tanks.
 

~Don~

Platinum Contributor
Member For 5 Years
Thank you for the brief overview, it helps a lot. The only question is how big/small are the inserts for the Flow V2. I use the 1.0 mm inserts in all my Dvarw tanks.
upload_2019-7-15_8-0-30.png

Unless he sells a specific deck with smaller AF... its not for you Brew
 

robfisher

Bronze Contributor
Member For 4 Years
Thank you for the brief overview, it helps a lot. The only question is how big/small are the inserts for the Flow V2. I use the 1.0 mm inserts in all my Dvarw tanks.

Mmmm not sure this one is for you... however they may add a very tight airflow insert when they finalize the packaging and extras. We will have to wait and see.
 

Mykreign

Platinum Contributor
Member For 5 Years
So my vapeshell was perfect for the first tank full, but I just filled it again and it flooded. It's not leaking (yet) but I'm trying to burn through the excess juice in the chamber. Any way to prevent this?

Edit: maybe the gurgling is coming from underneath the boro? But I can't take the boro out because if I unscrew the nut, the top of the vapeshell comes with it and I lose all my juice.

Sent from my SM-G950U using Tapatalk
 
Last edited:

BobsHere

From Wherever
VU Donator
Gold Contributor
Member For 5 Years
So my vapeshell was perfect for the first tank full, but I just filled it again and it flooded. It's not leaking (yet) but I'm trying to burn through the excess juice in the chamber. Any way to prevent this?

Edit: maybe the gurgling is coming from underneath the boro? But I can't take the boro out because if I unscrew the nut, the top of the vapeshell comes with it and I lose all my juice.

Sent from my SM-G950U using Tapatalk
I watched Todds review and wick it exactly as he does. Haven't had any flooding or gurgles.

As for coming apart, have only used a K&R flush nut or hybrid tip but haven't had that issue either, not sure why a stock nut would be any different.
Maybe slide the glass down and carefully grab it with a pair of pliers? Would not want to do this on the authentic.....
 

Mykreign

Platinum Contributor
Member For 5 Years
Uh, maybe not.
Not much space
Guess next time I'll take the boro out and then fill it. Then I can get rid of any excess juice. Kind of a pain if I'm not at home though

I cut the wicks along the edge of the deck. So they were kind of pointed.

Sent from my SM-G950U using Tapatalk
 

R3alJim Shady

Platinum Contributor
Member For 4 Years
Guess next time I'll take the boro out and then fill it. Then I can get rid of any excess juice. Kind of a pain if I'm not at home though

I cut the wicks along the edge of the deck. So they were kind of pointed.

Sent from my SM-G950U using Tapatalk
Maybe the wicks aren't covering the juice holes completely? After I build and wick I check the underside of the deck to make sure I see nothing but cotton through the holes.

Sent from the Death Star
 

R3alJim Shady

Platinum Contributor
Member For 4 Years
Well I have to take it out now. Getting check atomizer error.

Sent from my SM-G950U using Tapatalk
Aw man. Hope you it squared away.

FYI, most hybrid tips don't have an o-ring on them and work just fine. Might want to take the o-ring off and see if that helps with the whole issue with the VapeShell. Of course, do so at your own risk lol

Sent from the Death Star
 

Mykreign

Platinum Contributor
Member For 5 Years
And I thought I was the "bad news bears" sometimes...jeez
Aw man. Hope you it squared away.

FYI, most hybrid tips don't have an o-ring on them and work just fine. Might want to take the o-ring off and see if that helps with the whole issue with the VapeShell. Of course, do so at your own risk lol

Sent from the Death Star
Oh man wait til you here this.

So I took it apart, cleaned it. Lost all my juice. Put it back together and shit...forgot the air flow adjuster.

So I unscrew the nut, top of the vapeshell comes up, juice comes out the top this time, goes all over the mod. Then clean everything again and put it back together WITH the AF ring.

It's working good now. No gurgly, slurpy sounds or leaking.

Smh lol

Sent from my SM-G950U using Tapatalk
 

R3alJim Shady

Platinum Contributor
Member For 4 Years
Oh man wait til you here this.

So I took it apart, cleaned it. Lost all my juice. Put it back together and shit...forgot the air flow adjuster.

So I unscrew the nut, top of the vapeshell comes up, juice comes out the top this time, goes all over the mod. Then clean everything again and put it back together WITH the AF ring.

It's working good now. No gurgly, slurpy sounds or leaking.

Smh lol

Sent from my SM-G950U using Tapatalk
Been there man. I'm sure most BB users have unfortubately. Glad you got it worked out though!

Sent from the Death Star
 

BobsHere

From Wherever
VU Donator
Gold Contributor
Member For 5 Years
Oh man wait til you here this.

So I took it apart, cleaned it. Lost all my juice. Put it back together and shit...forgot the air flow adjuster.

So I unscrew the nut, top of the vapeshell comes up, juice comes out the top this time, goes all over the mod. Then clean everything again and put it back together WITH the AF ring.

It's working good now. No gurgly, slurpy sounds or leaking.

Smh lol

Sent from my SM-G950U using Tapatalk
Oh good lord. I've never had the shell come apart like that. My hybrid has an o-ring, flush nut o-ring, and your using the my old shell.
Maybe try it without o-ring like Shady suggests, I'm sure you're not cranking on it like your prom date or something.
 

BrewBear

Platinum Contributor
Member For 4 Years
Oh man wait til you here this.

So I took it apart, cleaned it. Lost all my juice. Put it back together and shit...forgot the air flow adjuster.

So I unscrew the nut, top of the vapeshell comes up, juice comes out the top this time, goes all over the mod. Then clean everything again and put it back together WITH the AF ring.

It's working good now. No gurgly, slurpy sounds or leaking.

Smh lol

Sent from my SM-G950U using Tapatalk
I think we've all done that with one bridge or another! My latest was with a Dvarw where I forgot to put back the chimney top, I was used to the topfill tank and got myself confuzzled!
 

Mykreign

Platinum Contributor
Member For 5 Years
I think we've all done that with one bridge or another! My latest was with a Dvarw where I forgot to put back the chimney top, I was used to the topfill tank and got myself confuzzled!
Duude! Don't take it out in public......ohhh, you mean the VapeShell....never mind!:vino:I did try FT vapeshell, wasn't impressed enough to look for the authentic then @~Don~ mentioned the MF bridge, been a happy cam..I mean vaper ever since.


Sent from my SM-G950U using Tapatalk
 

BrewBear

Platinum Contributor
Member For 4 Years
You're into coffee as well? I mean I just going some Caribou stuff at home and I really enjoy that. Do I even want to ask what else is out there?

Sent from my Pixel XL using Tapatalk
Fair warning, you're tap dancing in the mine field there! That's another slippery slope, don't ask how i found that out!

Just ask the Shady dude! His Guatemalan coffee is really good, I'm averaging two 32 oz cups a day!
 

BobsHere

From Wherever
VU Donator
Gold Contributor
Member For 5 Years
There is a difference between the BB nuts. Stock is far right with the fatter o-ring. Might be sealing itself inside the chimney
20190715_203908.jpg 20190715_203928.jpg

The middle or left is the KRV flush nut.
 

~Don~

Platinum Contributor
Member For 5 Years
Crap I definitely need to send you some Don! Totally spaced! Tomorrow...

Sent from the Death Star

No rush dude, truly. I just had 5 lbs of coffee delivered on Saturday. Should last me 2 weeks lol... Talked with a BirdRock... sadly the red honey I REALLY like wont be back til early next year... and around March for that Yellow Honey I sent ya...

Back to my regular Pacamara now... at least this stuff is around all year.
 

R3alJim Shady

Platinum Contributor
Member For 4 Years
No rush dude, truly. I just had 5 lbs of coffee delivered on Saturday. Should last me 2 weeks lol... Talked with a BirdRock... sadly the red honey I REALLY like wont be back til early next year... and around March for that Yellow Honey I sent ya...

Back to my regular Pacamara now... at least this stuff is around all year.
Yeah that's one of the tough things about coffee. I had a Guatemala San Carlos that I loved. The lot sold out so I had to try this Guat Finca Grano de Oro. Glad I did bc it's even better than the San Carlos! Has a nice earthy backbone that allows for a richer chocolate profile. Super smoooooooth

Sent from the Death Star
 

R3alJim Shady

Platinum Contributor
Member For 4 Years
I have a KRMA, waaaaaay too much air for me, even choked down, on my "clowdy " moments. Ain't no way it'll be better in a BB, or get close to MF.
Funny how MTL is coming back into style, but the BB bridges/RBAs are a bit behind.

Sent from the Death Star
 

DogMan

VU Donator
Diamond Contributor
Member For 5 Years
I really like the look of those. The Delrin construction should make it more functional as a daily carry.

Sent from the Death Star
the built in lipo is a bummer

i just saw it, while looking for something else. Thought someone might be interested:)
 

BrewBear

Platinum Contributor
Member For 4 Years
the built in lipo is a bummer

i just saw it, while looking for something else. Thought someone might be interested:)
I tend to agree with you about the power supply, the one thing I didn’t see mentioned (saw only part of the video )is if you can fiddle with the chip in eScribe via the usb port.
 

R3alJim Shady

Platinum Contributor
Member For 4 Years
Clear o-rings on my Dvarws look so clean
999d6ec6072b581a98a6ef9e84d76484.jpg
59f88e1e23c4bd5cd5d4ec8d15ad82a0.jpg


Sent from the Death Star
 

~Don~

Platinum Contributor
Member For 5 Years
Got my RNB today. Waiting on tip and doors. I'm so bad at transplanting stickers
:(

d359ce676846a02c93ae92d7b35cdb3f.jpg

40239e7f1fddcf38b9fa29697957172c.jpg


Sent from my SM-G950U using Tapatalk

I ran across those stickers a while ago, you can buy them in packs of 10 for like $7...

Just can’t for the life of me remember where


Sent from my iPhone using Tapatalk
 

VU Sponsors

Top