KingPin!
In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
Looking good! so is this the one mate? The holy grail you’ve been looking for?
Thank you sir! I like the red and black combo.Congrats!!! It looks good on that topside!
I think it is. My quest for the rusty chalice is over! Praise jeebus!!!Looking good! so is this the one mate? The holy grail you’ve been looking for?
I think it is. My quest for the rusty chalice is over! Praise jeebus!!!
The flavor is really good and only spits if over squonked. Otherwise it's a fantastic vape.
Holy shit that does look thin there, how hard were you wrenching?I was enjoying this RDA until the post snapped. I haven't had it a week.
Hoping they replace it.
I don't get spit back even when I juice it into the coil. Must be the build I have in there. [on Furyan]I think it is. My quest for the rusty chalice is over! Praise jeebus!!!
The flavor is really good and only spits if over squonked. Otherwise it's a fantastic vape.
Not hard at all, I couldn't even fkn believe it when it happened... I just stared at it in quiet existential disbelief at how utterly dumpster fire my life has become. The other side doesn't have this issue but the post above it does. I think that it's just some shotty machining on the one half of the pipe design? I don't know. FML.Holy shit that does look thin there, how hard were you wrenching?
I can try...Holy mackerel.
Can you show us the post above that has the same issue?
Did you check the authenticity code?I can try...
I don't have the best camera, but you can sorta tell here how post above is already bulging. If that gets tightened at all it looks like it's gonna snap as well. I think there's just something messed up with the left side posts on mine. The right side isn't like that at all.
I see that bulge at the top. On the bottom it sorta looks like the piece that pushed through is, hollow looking? I just built mine and would rather not lake it apart. so while you have yours out, can you back a screw out of the other post and see if that part of the post is as thick as it looks from that top view? Or if it gets thinner where the screw meets the post...I can try...
I don't have the best camera, but you can sorta tell here how post above is already bulging. If that gets tightened at all it looks like it's gonna snap as well. I think there's just something messed up with the left side posts on mine. The right side isn't like that at all.
Good question. I just assumed he got it from ReLoad. Still should check thoughDid you check the authenticity code?
Did you check the authenticity code?
I have the paperwork that came with, but it's not in the boxAs far as I can tell there isn't one on the Reload box, just a sticker in the top right that says "S". The only serial number I can find is on the bottom of the deck labeled "6325".
Somewhere on or in the package should be a query ot number code. Might be on a card. @f1r3b1rd did yours have a code?As far as I can tell there isn't one on the Reload box, just a sticker in the top right that says "S". The only serial number I can find is on the bottom of the deck labeled "6325".
Somewhere on or in the package should be a query ot number code. Might be on a card. @f1r3b1rd did yours have a code?
I can't find any info about an authentication code for this atty, not even on the unboxings on yt. May not have one. Kindbright has come out with the clone, I'd load up a pic or video and compare it with yours.Mine didn't come with paperwork, it's just the metal box and inside is the foam cutout for the atty and screwdriver and under is extras n stuff.
I don’t believe it came with a card, I don’t have one in the tin now.Somewhere on or in the package should be a query ot number code. Might be on a card. @f1r3b1rd did yours have a code?
There is no link on the reload usa site to authenticate which is odd these days.I don’t believe it came with a card, I don’t have one in the tin now.
Bought it from eciggity, damn thing better be authentic for what it cost me.
I don’t believe it came with a card, I don’t have one in the tin now.
Bought it from eciggity, damn thing better be authentic for what it cost me.
Psyclone mods was the same with my citadelThere is no link on the reload usa site to authenticate which is odd these days.
They are a good solid vendor. Been buying from them for 6years now and have zero complaintsI also got mine from there. They emailed me back and said they'd replace it after I shipped it back for inspection.
Well for the cost of the atty I'd ship it back but would ask for reimbursement for the cost. Hopefully they step up and make it right. Please let us know how it plays out.I also got mine from there. They emailed me back and said they'd replace it after I shipped it back for inspection.
Well for the cost of the atty I'd ship it back but would ask for reimbursement for the cost. Hopefully they step up and make it right. Please let us know how it plays out.
Good to know.Psyclone mods was the same with my citadel
They are a good solid vendor. Been buying from them for 6years now and have zero complaints
Excellent, love a good vendor.They just sent me a return label so it won't cost me anything.
Killer! They’ll make it right.They just sent me a return label so it won't cost me anything.
Maybe I don't have paperwork if it didn't come with it, and that's why its not right here at my station. I bought it from ReLoad.I have the paperwork that came with, but it's not in the box
It is hard to put down! It just got even better when I changed from a tri-core 26/36 fused Clapton to a framed staple. The flavor is really popping now!
Nice setup.
When I get on that atty it's hard to put it down. The only reason I haven't picked it up in a couple days is it needed cleaned/wicked and I been checking out the new little RTA.
Not hard at all, I couldn't even fkn believe it when it happened... I just stared at it in quiet existential disbelief at how utterly dumpster fire my life has become. The other side doesn't have this issue but the post above it does. I think that it's just some shotty machining on the one half of the pipe design? I don't know. FML.
I emailed the distributor and Reload last night but no reply back from either today.
I just wicked mine. And now I'm not sure what alien is in there because it's 5 wraps. I'm sure it's 3id/.33 though.
I'm not getting any spit back. I have it this low.
View attachment 137092
Using CBP I have it firmly snug in the coil. A good fluff of the tails, and thinned them a fair bit top & bottom. I cut it about there and when tucked in its touching the deck but not laying in there. While my well looks like a lot of cotton, it's thinned, fluffy, and short.
View attachment 137095
Hope that helps.
Absolute flavor bomb.
Congrats,,!Absolute flavor bomb.