Become a Patron!

Billet Box Appreciation Thread

Papachaz

Silver Contributor
Member For 2 Years
I’ve got some 30/34 316L claptons already made up. 2.5id 6 wrap at 1 ohm. I’ll just drop one of those in there after I figure out which airflow insert I like the best. I wasn’t sure if the dvarw was going to like simple round wire builds better than claptons. Thanks for the replies.


Carpe Nidor
 

BrewBear

Platinum Contributor
Member For 4 Years
I’ve got some 30/34 316L claptons already made up. 2.5id 6 wrap at 1 ohm. I’ll just drop one of those in there after I figure out which airflow insert I like the best. I wasn’t sure if the dvarw was going to like simple round wire builds better than claptons. Thanks for the replies.


Carpe Nidor
If it's any help, I use the 1.0 mm for the tight draws and the largest (2.0 or 2.5) in the $ 15 kit from FT for restricted DL. The nice thing is that you can change the air flows without removing the coil (bit of a PITA but not too bad). Tried the tank with the insert first but adding the coil and wick will further slightly reduce the air flow, so keep that in mind.
 

Papachaz

Silver Contributor
Member For 2 Years
Got my dvarw up and running now also. A very nice flavorful vape from it. I couldn’t even try that ugly stock drip tip though. That’s in the never to be seen again box.
e998520afa17f99698ad9f9311a31b87.jpg



Carpe Nidor
 

BrewBear

Platinum Contributor
Member For 4 Years
I was catching up on this thread and seen where jmoneyrealjslimshady or whatever the hell he changed his name to saying how much he loved people asking if they can run salts in there devices lol (jmoney) u da man bro

Sent from my SM-G950U using Tapatalk
Whaaat? Really? You can run nic salts in the BB?:vino:
 

R3alJim Shady

Platinum Contributor
Member For 4 Years
I was catching up on this thread and seen where jmoneyrealjslimshady or whatever the hell he changed his name to saying how much he loved people asking if they can run salts in there devices lol (jmoney) u da man bro

Sent from my SM-G950U using Tapatalk
I already read your comment and decided to let it go lol!
My point that high nic salts should be used typically for MTL/low wattage. There are low nic salt juices out there that you can use in DL/high wattage setups too.

Sent from the Death Star
 

Papachaz

Silver Contributor
Member For 2 Years
I was catching up on this thread and seen where jmoneyrealjslimshady or whatever the hell he changed his name to saying how much he loved people asking if they can run salts in there devices lol (jmoney) u da man bro

Sent from my SM-G950U using Tapatalk

I want to see someone run 50mg salts in a dual 21700 mech with a twisted messes comp rda. Hell I’d pay money for that laugh.


Carpe Nidor
 

Papachaz

Silver Contributor
Member For 2 Years
We're just messin' with him. All I've been using in the last year is nic salts in all my toys.

I tried a couple of salts but my personal preference for my mtl setups is 12mg free base nic. I know I’m the oddball but salts had more of a harsh throat hit to me.


Carpe Nidor
 

derrickfosgate

Gold Contributor
Member For 4 Years
I already read your comment and decided to let it go lol!
My point that high nic salts should be used typically for MTL/low wattage. There are low nic salt juices out there that you can use in DL/high wattage setups too.

Sent from the Death Star
I know ur point. Was just bein funny .havent been on here in awhile

Sent from my SM-G950U using Tapatalk
 

derrickfosgate

Gold Contributor
Member For 4 Years
yep

i drip straight 100mg when i get it to test it

usually vape 60mg at 50 watts, but used the same in my nutpunch at 100+ watts :oops:
Dogman back off I'm tryin to make some moneys here lol (I kid I kid I kid)

Sent from my SM-G950U using Tapatalk
 

~Don~

Platinum Contributor
Member For 5 Years
Hey! You got bored with the knives pages?
Either that, or you ran out of money :vino:
This is cheaper by far.....

Nope...bought a Sebenza 21 micarta

Probably going to buy an Inkosi next week

31098ed537ac8cf61cdec0c01d27b4d4.jpg


upload_2019-3-5_20-10-48.png


Sent from my iPhone using Tapatalk
 

~Don~

Platinum Contributor
Member For 5 Years
Thinking about the Chris Reeve Umnumzaan in Tanto also... costs less... but the Inkosi is just awesome lol
 

BrewBear

Platinum Contributor
Member For 4 Years

R3alJim Shady

Platinum Contributor
Member For 4 Years
Definitely a more cost-effective option when compared to the authentics. I didn't much care for either rendition of the Insider, the original and the MTL version. I have the authentic ones but they are relegated to the "when I run out of EUC coils" box. If you like a loose MTL, then they will probably work for you.
I think you'd enjoy the VapeShell with the MTL inserts and troydestroy MTL plug. Willing to bet that would be an easy trade.

Sent from the Death Star
 

Papachaz

Silver Contributor
Member For 2 Years
Definitely a more cost-effective option when compared to the authentics. I didn't much care for either rendition of the Insider, the original and the MTL version. I have the authentic ones but they are relegated to the "when I run out of EUC coils" box. If you like a loose MTL, then they will probably work for you.

I’m good with the vape shell and the inserts. I also like the kanger rba for a change occasionally.


Carpe Nidor
 

NGAHaze

Gold Contributor
Member For 5 Years
I have yet to try the vapeshell ... was not sure about the clone and I wasn't willing to fork out the $ they wanted for the authentic without knowing if I'd like it or not.

Anyone here try the clone?
 

Papachaz

Silver Contributor
Member For 2 Years
I have yet to try the vapeshell ... was not sure about the clone and I wasn't willing to fork out the $ they wanted for the authentic without knowing if I'd like it or not.

Anyone here try the clone?

I’ve got the clone and the inserts for it. I really like it. Once you get the wicking down it’s a very good vape. With the inserts you’re sure to find the vape you like.


Carpe Nidor
 

VU Sponsors

Top