Become a Patron!

What did you do today that is vape related?

nadalama

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
Put cotton and coils in new VC Shogun and O-Atty V2 clone. I was hoping the V2 would be easier to build than the V1. NOT. That was probably the most trouble I've ever had getting a coil into an atty. After all that, I find that the V1 gives a better vape, too. Go figure.

Shogun was super easy, but the rub there was that I'd made my first ribbon wire coil. It was all springy and going every which way, but I finally got it. Has too many wraps, though, so resistance is about 1.3 ohms....however....damn! The flavor on that thing at 22W!!! I may just have to leave it like that. New mix of Queenside clone at 2.5% less flavoring than last time tastes bright, sweet, and fantastic!

Did move the Shogun from the Anita to the Cut. because the Morphe vapes even better on the Anita than it does on the Cut, plus the Morphe is larger and it just looks more balanced on the Anita.

O-atty V2 took the place of a Recurve that was on the Recurve mod. Hopefully the lackluster vape will get better after the coil and cotton break in. (The coil in the O-atty is made with SS 28x2/36 Clapton wire, my first time using it. The wire may be a problem, dunno.)
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
Put cotton and coils in new VC Shogun and O-Atty V2 clone. I was hoping the V2 would be easier to build than the V1. NOT. That was probably the most trouble I've ever had getting a coil into an atty. After all that, I find that the V1 gives a better vape, too. Go figure.

Shogun was super easy, but the rub there was that I'd made my first ribbon wire coil. It was all springy and going every which way, but I finally got it. Has too many wraps, though, so resistance is about 1.3 ohms....however....damn! The flavor on that thing at 22W!!! I may just have to leave it like that. New mix of Queenside clone at 2.5% less flavoring than last time tastes bright, sweet, and fantastic!

Did move the Shogun from the Anita to the Cut. because the Morphe vapes even better on the Anita than it does on the Cut, plus the Morphe is larger and it just looks more balanced on the Anita.

O-atty V2 took the place of a Recurve that was on the Recurve mod. Hopefully the lackluster vape will get better after the coil and cotton break in. (The coil in the O-atty is made with SS 28x2/36 Clapton wire, my first time using it. The wire may be a problem, dunno.)
Busy busy. Switch rdas isn't bad. Until you have to empty the bottles and switch juice and all. Lol
 

MannyScoot

Diamond Contributor
Member For 4 Years
Comparing Natakari Vs Viscious Ant
291b95877b2e7bec821b6113f9e30e42.jpg
4fd50529e309ed132a5d1026789d2fd6.jpg
64f046a3ee1d113d5d6ae04bdeecfeb6.jpg


Sent from my Pixel 2 XL using Tapatalk
 

Just Frank

Platinum Contributor
Member For 5 Years
I'm fairly new to RDAs but the boxes are adding up. I got them all rounded up and put them away. Some of these RDAs include a buncha goodies. So I took all that stuff out and put it all in a small case. Some have the works like, cotton, coils, BF pin, orings, 510 adapter, grub screws, screwdriver, "vape tool" (t-wrench). I wanted to put all that stuff where I can get at it quickly if needed. I figured I better do it now or else I'll forget about alot of that stuff.
 

MannyScoot

Diamond Contributor
Member For 4 Years
I'm fairly new to RDAs but the boxes are adding up. I got them all rounded up and put them away. Some of these RDAs include a buncha goodies. So I took all that stuff out and put it all in a small case. Some have the works like, cotton, coils, BF pin, orings, 510 adapter, grub screws, screwdriver, "vape tool" (t-wrench). I wanted to put all that stuff where I can get at it quickly if needed. I figured I better do it now or else I'll forget about alot of that stuff.
Yes..... I now have a collection of mini screwdrivers...... Most blue in color....

Some are really good quality .....

Sent from my Pixel 2 XL using Tapatalk
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
Just bought an Elevate rta from element vape. And another build mat. Can't pass up a 5dollar build mat. Was supposed to get an elevate from a contest win ad they sent a profile rda instead. So I bought my own
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
I want a mat....they useful?

#staycloudy
Oh yea. I like it. I've got the one I cut up for my table. Then got a new table thing. Easier to see finer wire. Plus you can't beat 5 bucks when others sell for 20 and 30
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
I actually super glued the edges of mine to the table so I didn't have to worry about slippage
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
Well id be putting it in the slide out part...pic edited to show.
9f5506a331bdeefd3a36e4a8edd57dfc.jpg


#staycloudy
It's a large size mat. More than 2ft across. I cut mine down to fit. But it's definitely nice. Like a nice mouse pad.
 

Mykreign

Platinum Contributor
Member For 5 Years
Dead rabbit rta just flooded ugh. It was fine all night and all morning then all the sudden...makes sense

Sent from my SM-G950U using Tapatalk
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
Yeah. I just took it apart, cleaned it and put it back together. Guess you have to chain vape it right after you fill it to balance out the vacuum.

Sent from my SM-G950U using Tapatalk
Learn something new every day
 

VU Sponsors

Top