Become a Patron!
Billet Box Appreciation Thread
- Thread starter forza
- Start date
From fasttech.
https://www.fasttech.com/products/0...pervape-dvarw-mtl-styled-rta-rebuildable-tank
Carpe Nidor
Thanks, I looked at all of those, I just seem to remember it was either @jmoney426 or @So619Cal posting a link to a Dvarw with all the bits and bobs (tanks and air flow restrictors). I also remember @So619Cal saying the parts from the clone fit the authentic but I'm not sure if it was this one they linked to or the Coppervape clone.
The Coppervape one is confirmed interchangeable with the authentic. I suspect the kit I have is too, but I can't be 100% sure.
Sent from the Death Star
The one I linked before is the one I have and works with the authentic.
Well, I'm ordering a bucket full of coppervape stuff, only wish I found a couple 2.0 ml caps but all I found was 3.5 ml.
Advice and opinions please. My sxk bb has pretty much replaced all my other mods. I use it all day every day since I got it. I am wondering if there is enough of a difference in build quality between the clone and the original to make it worth buying an original. I don’t want to spend 300 plus on an original and just use it at home. Should I go for an original or get another clone while they are still available? Maybe get another couple of dna 60 boards to keep on hand? I’m definitely getting extra tanks, seals, glass. I’m looking at the billet box being my long term main use mod.
Carpe Nidor
Carpe Nidor
I have two originals and two SXK BB with USB. One of my SXK's I killed and bought a replacement (thus now I have the two of them). The difference between authentic and SXK is minimal as far as I can see, in fact the SXK with USB is more functional. Personally, I would buy the SXK and possibly a tank or two from BBV (or just the repair/maintenance kit). As far as I can see, Fasttech will have the black ones on 1/5/19...or so they say, and a 10% off sale from 1/1/19-1/4/19 (code Hello2019 )
I only owned an authentic, but I didn’t fear taking it out, and the only preventive measure I took was putting blue painters tape on the bottom to eliminate table rash.
I let it bang around in my car door handle, slap about in my cup holder.
In the pocket with keys or banging against one of my knives
Save your money and get back ups, for it will fail eventually. Also make sure if you’re thinking of thinning the herd, to save a mod/atty combo you enjoy.
Sent from my iPhone using Tapatalk
So it looks as though I'll be taking delivery if a FT delivery tomorrow which includes the full kit Dvarw clone. It's black and I wish I could tell you wtf I was thinking when I ordered it haha!
That being said if any of the regulars here want to try it let me know and I'll send it right on. Only condition is that if someone else wants to try it that you pass it when you're done trying it out.
Sent from the Death Star
That being said if any of the regulars here want to try it let me know and I'll send it right on. Only condition is that if someone else wants to try it that you pass it when you're done trying it out.
Sent from the Death Star
PM me your address again and I'll get it out in the mail by on Wednesday.
Sent from the Death Star
Very expensive German made stick mod, think provari but more expensive.
Upon the advice and opinions of others here ( thank you for that) I have ordered another sxk bb. I would have ordered a couple of care kits and a couple of dna 60 boards also if they would have been in stock......... oh well. I’ll just have to keep checking on them.
Carpe Nidor
Carpe Nidor
Speaking for myself, I will get the care kits from BBV (http://billetboxvapor.mybigcommerce.com/care-kit/), not the SXK ones simply because the little rubber gasket for the boro tank seems to be better.
Last edited:
Cool then, I've been stalking that site too!
The way I knew it was "Be good, but if you can't be good, be careful 'cause accidents make people"Not everyone here is in all the thread I stalk so Happy New year to everyone. Hope the next one is the best yet. And if you make any mistakes, please don't name it after me.
Happy New Year to one and all, health and happiness!
Yeah, me too Thanks to you and the deal you posted @ Gas City the other day! I did so in spite of the fact that 2 SXKs have already crapped out on me ... decided I still 'needed' to have one with the USB port, lol.
ETA: Almost forgot ... I hope 2019 proves to be a year of success and happiness for all who frequent these halls!
Last edited:
How it runs? I'm looking for a new vape. If it is not bad, I figure I can try it and see.
commenting on someone's post from over a year ago. Wtf. All over the thread and not up to date on shit.
laurie9300
Member For 5 Years
They would be for this......
Did you get the AF inserts in yet? I would of figured the 1.2mm stock was to loose for ya?
I ordered them with the rest of the stuff. I didn't even bother with the 1.2, just installed the smallest one (0.8 ?) and it is perfect.
yeah I figured the 0.8mm one would be right up your alley, I can hang with the 1mm, but the 0.8mm one I end up looking like I am sucking lemons through a straw lol
EDIT: I rock the 1.2mm in both of mine and its perfect for me
EDIT 2: Since @derrickfosgate didn't claim the Gus you still want it?
Is the Gus a mech?yeah I figured the 0.8mm one would be right up your alley, I can hang with the 1mm, but the 0.8mm one I end up looking like I am sucking lemons through a straw lol
EDIT: I rock the 1.2mm in both of mine and its perfect for me
EDIT 2: Since @derrickfosgate didn't claim the Gus you still want it?
Yup, lil 18350, its about 3/8" over all taller than one of my Satburns... its pictured here a few pages back with a Dwarv on it
I really appreciate the offer but mechs aren't my thing. I still have a Project Sub-Ohm SMPL I used for a day and put it back in the box and a Deus mods Prism I've used for about a week and put aside. They are my backups if all else goes to crap.
I would call dibs but who knows when I can get my hands on these dam things and I cant take the mech without knowing when I'll get a tank and deckyeah I figured the 0.8mm one would be right up your alley, I can hang with the 1mm, but the 0.8mm one I end up looking like I am sucking lemons through a straw lol
EDIT: I rock the 1.2mm in both of mine and its perfect for me
EDIT 2: Since @derrickfosgate didn't claim the Gus you still want it?
Sent from my SM-G950U using Tapatalk
If you're gonna buy the authentic, I would suggest creating an account with them and put something in the basket ( I added the small air flow inserts). The morning of the 11th, at 5:00 am Pacific time (for me) I added two decks and checked out. I had to check just now to make sure, they do use PayPal and shipping is 11 euros.
Is that the steam tuners clear tank u have ? And I'm not seein the af inserts on the site only see the glass and top fill kits under accessories tab
Sent from my SM-G950U using Tapatalk
https://www.khwmods.com/index.php/product/dvarw-rta-08mm-afc-insert/
https://www.khwmods.com/index.php/product/dvarw-mtl-rta-10mm-afc-insert/
https://www.khwmods.com/index.php/product/dvarw-mtl-rta-round-hole-chimney/
https://www.khwmods.com/index.php/product/steam-tuners-dvarw-mtl-rta-2ml-clear-cap-copy/
These are some of the things I bought besides the two bases. I just ordered a bucket full of Coppervape Dvarw crap from FT, @So619Cal said they fit the original base. Yes, that is the SteamTurners bell cap.
https://www.khwmods.com/index.php/product/dvarw-mtl-rta-10mm-afc-insert/
https://www.khwmods.com/index.php/product/dvarw-mtl-rta-round-hole-chimney/
https://www.khwmods.com/index.php/product/steam-tuners-dvarw-mtl-rta-2ml-clear-cap-copy/
These are some of the things I bought besides the two bases. I just ordered a bucket full of Coppervape Dvarw crap from FT, @So619Cal said they fit the original base. Yes, that is the SteamTurners bell cap.
Thanks for the info my dumbass was on the wrong site
Sent from my SM-G950U using Tapatalk
All the new bases come with the oval (larger juice holes) now, I bough the one used earlier, it has smaller, round juice holes. I usually Vape 50/50 but if you vape VG heavy juices, the new ones are better for you.
Here is one to twist ya a tad...
thats the Dwarv with the ST top fill cap
lolNot sure I mentioned the TF here yet?
AhhhhhhhhhhhhHere is one to twist ya a tad...
View attachment 128290
thats the Dwarv with the ST top fill cap
Not sure I mentioned the TF here yet?
Sent from my SM-G950U using Tapatalk
Is that the new top fill from Steam Turners? They want $40-ish euros for it, almost as much as the base!Here is one to twist ya a tad...
View attachment 128290
thats the Dwarv with the ST top fill cap
Not sure I mentioned the TF here yet?
Aha! Ok we did talk about it then...couldn’t remember...but yeah, top fill nearly the cost of the deck
Sent from my iPhone using Tapatalk