Hi Vaping Underground members, In this review i take a look at the Saber 100 20700 VW Kit from iJoy. The iJoy Saber 100 20700 VW Kit was supplied for the purpose of this review by Emma from Buybest.
https://www.buybest.com/product/100W-IJO...57618.html
Introduction
The Saber 100 is a 100W tubular variable wattage device which in this kit is paired with the gorgeous looking Diamond Subohm tank. It will run on either a 20700 or 18650 (with included adaptor) battery and pretty much allows you to adjust wattage and that's it. There are plenty of people who want to be able to regulate wattage but that's all they want and don't want the added complications that come with most regulated devices.
In the Box
Contents:
1x IJOY SABER 100（100W) (With or without battery options)
1x 18650 Adapter
1x DIAMOND SUBOHM TANK TPD
1x DM-Mesh Coil 0.15ohm (40-90W Pre-installed)
1x DM-DM Coil 0.15ohm (40-90W)
1x Replacement Glass
1x Tool pack
1x USB Cable
1x Warranty Card
Aesthetics and Ergonomics
The Saber 100 Kit comes in typical iJoy cardboard packaging, i received the Stainless Steel version, it's also available in Black, Rainbow, Gun Metal, Blue, Red, Purple, Green, Gold and White, all versions come with matching Diamond tank. The Diamond tank is 25mm at the base but the bottom and top has diamond design heavy texturing that broadens the tank which suits the stunning iridescent bulge glass, on top sits a resin 810 drip tip. The device is tubular and bigger in diameter at the bottom than the top. The main tube is in the colour of choice with Black bottom battery cap that tapers in and top section (also Black) that steps in from the main tube. The front has a Black protruding pentagonal shaped fire button towards the top, towards the bottom is an isosceles trapezoid shaped Black panel which houses the screen and Black pentagonal up and down buttons. The back of the device has the micro USB port towards the top, at the bottom is "IJOY" etched into the metal. The base which is the battery cap has branding, two swords crossing logo and a central venting hole. The stepped top section houses the spring loaded 510, around the parameter it says "MAY VAPE FORCE BE WITH YOU", there is also safety stamps. The build quality is good and as you would expect from a tubular device it has very good ergonomics.
Diamond Subohm tank Specs and Features:
Diameter: 25mm
Height: 56.5mm
Capacity: TPD Version (2ml) Standard Version 5.5ml(with 4ml regular glass tube)
Coil: DM-MESH Mesh coil
DM-DM diamond-like coil
Drip Tip: 810 resin drip tip
Powerful Subohm tank with stylish diamond design
5.5ml/ 4ml large capacity with 810 resin drip tip
180° Fast screw-cap filling & adjustable bottom airflow
All-new DM-MESH mesh coil & DM-DM diamond-like coil
Thread: 510
Colours: Mirror Gold, Mirror Green, Mirror Purple, Mirror Red, Mirror Blue, Mirror Gun Metal, Mirror Rainbow, Mirror Stainless Steel, Mirror Black, Mirror White
Diamond Subohm Tank Overview
The Diamond Subohm Tank in my opinion is quite a looker, it's 25mm in diameter at the base but the diamond design texturing top and bottom adds some girth to the tank and also suits the bulge glass. The tank separates into it's various parts easy enough and is made up of the normal base, top and glass sections. The bulge glass gives the Diamond a capacity of 5.5ml and is iridescent which looks gorgeous when the light catches it. The Kit also includes a straight tinted 4ml glass (TPD version is 2ml) but the iridescent glass in my opinion looks too nice not to use. The drip tip is an 810 with o-rings fitting so if you want to fit another 810 it needs to be one with o-rings. The drip tip is in 2 parts, the resin mouth section screws on to a silver base so i would imagine different resin sections will be available. The coils are 2 different types of mesh both are 0.15 with a rating of 40w to 90w. The airflow is dual cyclops with stopper which moves with nice resistance and finally the tank is top fill, a half turn and the top is off likewise just a half turn secures the top-cap onto the tank. The only slight issue i have is the drip tip is slightly loose, it doesn't come out during use put occasionally pops out when removing the top-cap.
Saber 100 Specs and Features:
Size: 97 (Height) x 29mm (Diameter)
Max wattage: 100W
Output mode: VW Mode
Resistance range: 0.05-3.0ohm
Battery type:
1x high-rate 20700 battery (with or without options)
1x high-rate 18650 battery with adaptor
Tank compatibility: No overhang with 25mm tanks
Portable pen-style single battery MOD
CNC engraving with attractive colors
100W max output with advanced IWEPAL chip
Personalized pentagonal fire button
Bright screen
Unique custom user mode
Thread: 510 thread
Colours: Black, Stainless Steel, Rainbow, Gun Metal, Blue, Red, Purple, Green, Gold, White
Fitting the Battery
The bottom of the device unscrews so you can slide a 20700 or 18650 (with adaptor) into the tubular device. Battery orientation is marked both inside the tube and on the screw on cap, the threading is a bit crunchy but that's my only build quality issue.
Using the Saber 100
The Saber 100 is a variable wattage device with very little functionality which is exactly what the people who would be interested in this device would want. To turn the device on and off is the usual 5 clicks and once on the small screen displays all the information you need. The screen is small but with the device only needing to display the basic information it's big enough. Most of the left of the screen displays your wattage, to the right we have a battery indication bar and below this "W" for watts just to remind you the figure on the left of the screen is your watts. Left bottom we have your puffs which while taking a vape changes to volts then back to puffs, finally right bottom is your resistance. You have up and down buttons which you use to adjust the wattage to what you want then simply press the fire button and vape. The only other function the device has is 3 clicks of the fire button brings up the puff reset screen which gives you the options yes or no. Adjusting the wattage with single clicks alters it in 0.1w increments but if you hold the up or down button down it alters in 1w increments which i do like. The device has a IWEPAL chip which gives you all the safety features you would expect including short-circuit protection, low-power protection, and anti-reverse protection of the battery. The lack of functionality of the device is the whole point but i really do thing you should have a lock device feature.
Review Continued Below:
https://www.buybest.com/product/100W-IJO...57618.html
Introduction
The Saber 100 is a 100W tubular variable wattage device which in this kit is paired with the gorgeous looking Diamond Subohm tank. It will run on either a 20700 or 18650 (with included adaptor) battery and pretty much allows you to adjust wattage and that's it. There are plenty of people who want to be able to regulate wattage but that's all they want and don't want the added complications that come with most regulated devices.
In the Box
Contents:
1x IJOY SABER 100（100W) (With or without battery options)
1x 18650 Adapter
1x DIAMOND SUBOHM TANK TPD
1x DM-Mesh Coil 0.15ohm (40-90W Pre-installed)
1x DM-DM Coil 0.15ohm (40-90W)
1x Replacement Glass
1x Tool pack
1x USB Cable
1x Warranty Card
Aesthetics and Ergonomics
The Saber 100 Kit comes in typical iJoy cardboard packaging, i received the Stainless Steel version, it's also available in Black, Rainbow, Gun Metal, Blue, Red, Purple, Green, Gold and White, all versions come with matching Diamond tank. The Diamond tank is 25mm at the base but the bottom and top has diamond design heavy texturing that broadens the tank which suits the stunning iridescent bulge glass, on top sits a resin 810 drip tip. The device is tubular and bigger in diameter at the bottom than the top. The main tube is in the colour of choice with Black bottom battery cap that tapers in and top section (also Black) that steps in from the main tube. The front has a Black protruding pentagonal shaped fire button towards the top, towards the bottom is an isosceles trapezoid shaped Black panel which houses the screen and Black pentagonal up and down buttons. The back of the device has the micro USB port towards the top, at the bottom is "IJOY" etched into the metal. The base which is the battery cap has branding, two swords crossing logo and a central venting hole. The stepped top section houses the spring loaded 510, around the parameter it says "MAY VAPE FORCE BE WITH YOU", there is also safety stamps. The build quality is good and as you would expect from a tubular device it has very good ergonomics.
Diamond Subohm tank Specs and Features:
Diameter: 25mm
Height: 56.5mm
Capacity: TPD Version (2ml) Standard Version 5.5ml(with 4ml regular glass tube)
Coil: DM-MESH Mesh coil
DM-DM diamond-like coil
Drip Tip: 810 resin drip tip
Powerful Subohm tank with stylish diamond design
5.5ml/ 4ml large capacity with 810 resin drip tip
180° Fast screw-cap filling & adjustable bottom airflow
All-new DM-MESH mesh coil & DM-DM diamond-like coil
Thread: 510
Colours: Mirror Gold, Mirror Green, Mirror Purple, Mirror Red, Mirror Blue, Mirror Gun Metal, Mirror Rainbow, Mirror Stainless Steel, Mirror Black, Mirror White
Diamond Subohm Tank Overview
The Diamond Subohm Tank in my opinion is quite a looker, it's 25mm in diameter at the base but the diamond design texturing top and bottom adds some girth to the tank and also suits the bulge glass. The tank separates into it's various parts easy enough and is made up of the normal base, top and glass sections. The bulge glass gives the Diamond a capacity of 5.5ml and is iridescent which looks gorgeous when the light catches it. The Kit also includes a straight tinted 4ml glass (TPD version is 2ml) but the iridescent glass in my opinion looks too nice not to use. The drip tip is an 810 with o-rings fitting so if you want to fit another 810 it needs to be one with o-rings. The drip tip is in 2 parts, the resin mouth section screws on to a silver base so i would imagine different resin sections will be available. The coils are 2 different types of mesh both are 0.15 with a rating of 40w to 90w. The airflow is dual cyclops with stopper which moves with nice resistance and finally the tank is top fill, a half turn and the top is off likewise just a half turn secures the top-cap onto the tank. The only slight issue i have is the drip tip is slightly loose, it doesn't come out during use put occasionally pops out when removing the top-cap.
Saber 100 Specs and Features:
Size: 97 (Height) x 29mm (Diameter)
Max wattage: 100W
Output mode: VW Mode
Resistance range: 0.05-3.0ohm
Battery type:
1x high-rate 20700 battery (with or without options)
1x high-rate 18650 battery with adaptor
Tank compatibility: No overhang with 25mm tanks
Portable pen-style single battery MOD
CNC engraving with attractive colors
100W max output with advanced IWEPAL chip
Personalized pentagonal fire button
Bright screen
Unique custom user mode
Thread: 510 thread
Colours: Black, Stainless Steel, Rainbow, Gun Metal, Blue, Red, Purple, Green, Gold, White
Fitting the Battery
The bottom of the device unscrews so you can slide a 20700 or 18650 (with adaptor) into the tubular device. Battery orientation is marked both inside the tube and on the screw on cap, the threading is a bit crunchy but that's my only build quality issue.
Using the Saber 100
The Saber 100 is a variable wattage device with very little functionality which is exactly what the people who would be interested in this device would want. To turn the device on and off is the usual 5 clicks and once on the small screen displays all the information you need. The screen is small but with the device only needing to display the basic information it's big enough. Most of the left of the screen displays your wattage, to the right we have a battery indication bar and below this "W" for watts just to remind you the figure on the left of the screen is your watts. Left bottom we have your puffs which while taking a vape changes to volts then back to puffs, finally right bottom is your resistance. You have up and down buttons which you use to adjust the wattage to what you want then simply press the fire button and vape. The only other function the device has is 3 clicks of the fire button brings up the puff reset screen which gives you the options yes or no. Adjusting the wattage with single clicks alters it in 0.1w increments but if you hold the up or down button down it alters in 1w increments which i do like. The device has a IWEPAL chip which gives you all the safety features you would expect including short-circuit protection, low-power protection, and anti-reverse protection of the battery. The lack of functionality of the device is the whole point but i really do thing you should have a lock device feature.
Review Continued Below:
