Thanks for clarifying. Jfc is a nice safeguard against flooding when refilling the tank.It will move after it's assembled.
I haven't had it leak, but I just leave it fully open .
Thanks for clarifying. Jfc is a nice safeguard against flooding when refilling the tank.It will move after it's assembled.
I haven't had it leak, but I just leave it fully open .
Good to know. ThanksYea that guy in the video don’t know what he’s talking about. We had this discussion on another forum. It doesn’t have a juice control you just tighten it down and that’s where it is. If you lossened it up it would just leak. That guy in the video isn’t the sharpest crayon in the box.
If it does, it’s an abnormal one because you can’t adjust it once the whole tank is assembled. So I don’t really see the point of itI am not not typing another word. It does or it doesn't...
Can you please compare it to the kylin mini flavor wise. I want to know if it's equal or better. I know it's subjective but I trust my sample buddy thank you.
Sure thing I’ll add that the list of stuff as well haha
Sorry for adding to your work load, but someone needs to do it lol. Thank you, it's much appreciated and take your time. Not planning on buying it in the next 20 minutes lol.Sure thing I’ll add that the list of stuff as well haha
Sorry for adding to your work load, but someone needs to do it lol. Thank you, it's much appreciated and take your time. Not planning on buying it in the next 20 minutes lol.
teaseLoL it’s no problem ...I don’t like rushing my reviews out anyway youre all good gonna get to know it a little first, find it’s quirks and what not then I’ll start comparing so bare with me on this one it’ll be about a month I reckon.
Build space is actually pretty good ya know I’m impressed with the size of the coil I just got in it bet the draws gonna be bloody tight now though haha
The intake MTL tank!LoL it’s no problem ...I don’t like rushing my reviews out anyway youre all good gonna get to know it a little first, find it’s quirks and what not then I’ll start comparing so bare with me on this one it’ll be about a month I reckon.
Build space is actually pretty good ya know I’m impressed with the size of the coil I just got in it bet the draws gonna be bloody tight now though haha
tease
I have 4 that adjust like the guy from Asmodus shows in the vid.If it does, it’s an abnormal one because you can’t adjust it once the whole tank is assembled. So I don’t really see the point of it
You know me too well matey! I'm gonna have to change my style a bit to keep you on your toes!Did that beefcake for you mate know you like the kanthal stuff and plugging up the space in the chamber
You and me got different Zesthias then because mine doesn’t have jfc, it just has a slot that the juice can go through to get to the coil.It will move after it's assembled.
I haven't had it leak, but I just leave it fully open .
You know me too well matey! I'm gonna have to change my style a bit to keep you on your toes!
How are you liking the flavor from the intake beefcake build?
It really doesn’t, what the Asmodus guy said & showed on video is bogus.Yes it does.Watch the Asmodus video at the bottom of the page.
https://www.asmodus.com/Zesthia-RTA-p/asmodus-zesthia-rta.htm
That's cool. I can wait for the review and find out all about the intake.Hahaha
Way to early to talk flavour properly,but it’s got potential mate for sure
The guy from the video is in this thread still trying to convince people the Zesthia has JFC, lol. He has the only four Zesthia’s made with jfc. They are limited editions, worth hundreds. I’m just waiting for them to pop up on the for sale section so I can get my hands on one.It really doesn’t, what the Asmodus guy said & showed on video is bogus.
I won’t leave ya hanging cause I’ll be chucking something else in at some point ....went old school with my first build pushing it to the max
Dragon skin 3.5mm ID ...God knows what’s in it built it yonks ago pretty sure it’s 3 twisted 28g KA1 cores with 36g skin ....ohms out at 0.58 sitting pretty at 42W
View attachment 115063
Not much room left on that lol surprisingly wicks like a champ and draw is not too bad at all
View attachment 115064
I tried after I watched the Asmodus vid when I first got the Zesthia & unless I’m doing something totally wrong I don’t see any JFC. There’s no way to turn/twist so that you can control the jf.The guy from the video is in this thread still trying to convince people the Zesthia has JFC, lol. He has the only four Zesthia’s made with jfc. They are limited editions, worth hundreds. I’m just waiting for them to pop up on the for sale section so I can get my hands on one.
No, I'm not the guy in the video and they won't be for sale...LOLThe guy from the video is in this thread still trying to convince people the Zesthia has JFC, lol. He has the only four Zesthia’s made with jfc. They are limited editions, worth hundreds. I’m just waiting for them to pop up on the for sale section so I can get my hands on one.
What you do is slightly loosen the tank section.I tried after I watched the Asmodus vid when I first got the Zesthia & unless I’m doing something totally wrong I don’t see any JFC. There’s no way to turn/twist so that you can control the jf.
That’s the same conclusion I reached, I figured I must be doing something wrong because the guy on the video, employed by Asmodus I believe said it had jfc. After some more investigation I reached the conclusion the man on the video is a dumbass. He was just unscrewing it. You’d think he’d look into that before making a video but I guess not. To keep this thread on track, how bout that Intake RTA. I like the looks of it and I don’t think it has a jfc either.I tried after I watched the Asmodus vid when I first got the Zesthia & unless I’m doing something totally wrong I don’t see any JFC. There’s no way to turn/twist so that you can control the jf.
To keep this thread on track, how bout that Intake RTA. I like the looks of it and I don’t think it has a jfc either.
Update on the Augvape Intake.
I really like this RTA, better than any RTA I have tried.
The flavor is great and it flat does not leak! Not even a little bit.
I have noticed that after I refill it I get a little spit back for two or three hits.
Sent from a Galaxy far far away.
Oh you got the black! Slick setup man.Didn't even know this thread was here.
I got mine 2 days ago and I like it a lot, it has became my favorite RTA for sure.
It does not have JFC but as far as flavor I would put it right up there with the Serpent SMM if not better.
I don't care for the bubble tank myself, I'm just using the straight glass.
The only con I can give it (and it's probably user error) is that when I fill it I away get spit back for the first few hits. After that it Smooths right out. I have some ideas I'm going to try but open to suggestions.
Sent from a Galaxy far far away.
Didn't even know this thread was here.
I got mine 2 days ago and I like it a lot, it has became my favorite RTA for sure.
It does not have JFC but as far as flavor I would put it right up there with the Serpent SMM if not better.
I don't care for the bubble tank myself, I'm just using the straight glass.
The only con I can give it (and it's probably user error) is that when I fill it I away get spit back for the first few hits. After that it Smooths right out. I have some ideas I'm going to try but open to suggestions.
Sent from a Galaxy far far away.
I’ve experienced the same, so I just filled slightly under the brim to eliminate any spit back. I would like to get some suggestions as to what would you recommend on what coils would be best, since I’m not building yet and just using pre made coils. So far I’ve used fused Clapton’s and just recently used a Hive coil just because it was different To give it a try. It really heats up fast and noticed if I take a 2-3 sec draw I get a burnt taste causing a irritated throat hit. So I lowered my wattage down from 50 to around 35 and it seemed to be better.
If you are in the US AVS, Advanced Vape Supply, has great wire and prebuilt coils. My particular favorites are the tri core ,quad core, staggered, aliens. The framed staples are great too but the resistance comes in a bit low. Their wire is all ss 316l or ss 430. Code AVS will get you 20% off.I’ve experienced the same, so I just filled slightly under the brim to eliminate any spit back. I would like to get some suggestions as to what would you recommend on what coils would be best, since I’m not building yet and just using pre made coils. So far I’ve used fused Clapton’s and just recently used a Hive coil just because it was different To give it a try. It really heats up fast and noticed if I take a 2-3 sec draw I get a burnt taste causing a irritated throat hit. So I lowered my wattage down from 50 to around 35 and it seemed to be better.
If you are in the US AVS, Advanced Vape Supply, has great wire and prebuilt coils. My particular favorites are the tri core ,quad core, staggered, aliens. The framed staples are great too but the resistance comes in a bit low. Their wire is all ss 316l or ss 430. Code AVS will get you 20% off.
If they are SS can you still run in wattage mode or run in TC. I really know nothing about TC mode as I run in wattage mode only. I’m still learning as I just moved over into the RTA realm to learn more and to experience more flavor at the same time gain experience in learning about building as well.
Great minds...Yeah SS can be used in either just go careful when dry burning SS checking for hot spots a gentle glow only is all you need otherwise you notice it start oxidising the metal
....Same goes for cleaning them too
It’s not as forgiving when glowing as nichrome or kanthal wire but neither of these are really suitable for TC their resistance changes very little when heated
Great minds...
Yeah SS can be used in either just go careful when dry burning SS checking for hot spots a gentle glow only is all you need otherwise you notice it start oxidising the metal
....Same goes for cleaning them too
It’s not as forgiving when glowing as nichrome or kanthal wire but neither of these are really suitable for TC their resistance changes very little when heated
You can use ss in power and tc both. The 316l does both very well, the 430 does better in tc imo. Tried it in power mode and wasn't as happy with it as I was using the 316l. I always order the 316l. Kidney Puncher carries some nice Ni80 coils if you want to try some different wires. NiChrome is used in power mode; the resistance comes in a bit higher than ss a bit lower than kanthal.
Meh, those are all child's play. You need to go with the gargoyle hoof coil. Here's a video of you are not familiar...Gonna try a 3mm ID next but to be honest I’m really digging this dragon 3.5mm ID I’m getting zero spit back after that initial refill and thats unusual for twisted coils
After that I’ll gauge where to go next staple, tri-core something or other if at all it needs it