Ohms, coils, and types of juice...

Have a question on the recommended juice types for best results on various types of coils with different ohms.

After watching and reading a few reviews on the breeze 2, which has premade coil atomizers with 0.6, 1.0, & 1.2 ohms. It seems like the recommendation is the following from what I gather, can anyone comment?

0.6 - reg ejuice (70/30 to 50/50)
1.0 - nic salts or high nicotine
1.2 - high nicotine?

Also hear that the lower the ohms, the faster it consumes juice as well. Thoughts?
Thanks

I would likely use the same juice with all three coils...... chances are with the higher ohm coils if run on an unregulated mod... I might bump up the nic a couple mg. In the end I will target to a daily dosage of approx 50 mg nicotine perday.

PG VG ratio will be determined by wicking ability and desired clouds.... the more restrictive the wicking the higher the PG...for more cloud ratio leans to VG.. need more throat feel add some PG.



Sent from my SCH-I605 using Tapatalk

I'm new to nic salts, and I'm glad I found that option.

Juice consumption is insignificant with the Breeze 2. I've used 35mg salt juice with all 3 atomizers. The only one that works for me is the .6.

I use the Breeze for stealth vaping in places where vaping is not allowed (inside my house, movie theater, public restroom, airplane, Disneyland, etc.). Normally, I use squonker with a .12 mesh wrap (Digiflavor Mesh) and 6mg nic juice. The 1 and 1.2 coils in the Breeze just don't come close to satisfying me. The .6 coil with 35mg nic salt works good enough to supply my nic demand.

The air flow is tight and there isn't much throat hit with the higher coils. I use that Breeze as a DTL device and usually hit it until it shuts off after 10 seconds. Hold it for another 10 seconds and there isn't much vapor to speak of being exhaled.

I suppose I could have tried the 50mg salts with the 1 Ohm coil, but I found a deal on 35mg and bought up 10 bottles for $30.