About as silly as a $150 rta on a $16 mod?
Become a Patron!
Squonkers are Bonkers
- Thread starter DogMan
- Start date
A V1 Nuppin on a Pico Squeeze?
Well my goodness.
Found me a stabwood door maker whos getting some of my money on payday..your choice of pattern( 30 to 40 patterns) with matching button for $65...most likely the Minimal will be getting it's and my very first stabwood set up.....love that tiny little mod.
Found me a stabwood door maker whos getting some of my money on payday..your choice of pattern( 30 to 40 patterns) with matching button for $65...most likely the Minimal will be getting it's and my very first stabwood set up.....love that tiny little mod.
I do it too! That's how I knowI'm guilty of that
Sent from my iPhone using Tapatalk
Personally, I've got a Nuppin v1 on a Pico, a Hadaly on another, and a KRMA on yet another. These are the stay home ones. The two Pico Squeeze that are in the car have Odis 16 toppers.
Guilty
How could I resist - did this soon as I got the atty...
Haku-Pico (sounds like an island, right?)
Haku-Pico (sounds like an island, right?)
Kinda like machu picchu for vapers!
I'm guilty both ways...low cost tank/RDA on more expensive mods and vice versa.
I have a Supersonic (SXK rendition) on a series SV mod even though the resident topper is a Nuppin v1, I like to change it up every once in awhile.
In my defense, I followed a very sage advice from......hmmm...who was it? see if you remember: it's not the price , it's the vape. If cheap atty and expensive mod or more likely expensive atty cheap mod combo works for you, then go for it!. I seem to remember a certain JL that was an early Pico Squeeze user/fan.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Pretty sure I was the first Bonker to bite on one
Preordered from Heaven's Gifts, the first place that actually had them; then, some who ordered US when they were actually released got theirs a little ahead of me
@pizzadave80 reviewed the pico 2 and seemed to like the placement of the button. May not be that oddly placed. Billet box has a side fire button and it's not uncomfortableI pre-ordered the Pico Squeeze Dos. Should ship out from China today. Some of you guys know I've been wanting to try out that side fire button like the Luna has. Only had to wait six months
Sent from my Nexus 6P using Tapatalk
they cloned an $11 RDA https://www.fasttech.com/products/1...nano-styled-rda-rebuildable-dripping-atomizerwonder if the cap is nicer than original
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
wonder if the cap is nicer than original
The cap looks to be clearer.
wonder if the cap is nicer than original
Still no Wanko clones though?
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
wonder if the cap is nicer than original
Good news for Cromwell!
Too late, I think I have 9 or 10 Wasps ...
OH! FT now has replacement parts for the Wasp Nano
but...there is nothing in the description, nor included items about a squonk pin, so WTF?
wonder if the cap is nicer than original
I'll easily pay $4 more for the authentic, especially if it saves me the trouble of trying to figure out, and buy the squonk pin separately.
Dual 18650 mechanical squonk recommendations?
heck even a tight assed bassid like me will buy the authentic over the clone at those prices.
The clear topcap is interesting though.
Series or parallel?
I'm good with parallel.
Custom classic makes 2 version
@CrazyChef v2 is having a flash sale at Pure Coils
CrazyChef v2.0
Gold Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Reddit Exile
VU Patreon
Thanks Mr. Bear! The coupon code for $25 off the Defiant Designs TS is FLASH-TS
Always happy to recommend one of the good guys.
Finally went for the hype and got a rage.....and happy I did
Sent from my SM-G935V using Tapatalk
Sent from my SM-G935V using Tapatalk
I just got my pulse 80w today & I have an inbox. I got the pulse because it takes the 20700s & I wanted something with better battery life. We'll see soon if it was worth it. But for $50 it was worth a shot.
I also picked up a Wasp Nano & freaking love it. I put that on the inbox to see if the single coil can maybe give me better battery life with that mod, as that's my only complaint about the inbox.
Sent from my SM-G950U using Tapatalk
I also picked up a Wasp Nano & freaking love it. I put that on the inbox to see if the single coil can maybe give me better battery life with that mod, as that's my only complaint about the inbox.
Sent from my SM-G950U using Tapatalk
The pulse 80w battery life aint that good it eats ijoys and even the 3100mah vapcells. A better choice in my opinion is the lostvape Furyan that is coming down in price and aint much more than the pulse but at least i can use 21700 30 T's which makes it much much better, but of course that is my opinion between the 2 and from using them.
I don't think the Pulse is bad on battery life tbh. The Vandy chip seems fairly efficient especially compared to the 75c in my Therion.
I use VTC5As in mine and run it it voltage mode at 3.7v with a 0.4 coil and it actually seems to run longer than my mech squonkers. I'm not sure what the cut off is but I definitely seem to be getting more usable power from it before a battery swap than I do on my mechs or Pico's .
I've not tried any 20700s in it yet as many of my other mods are limited to 18650 and I don't wanna be juggling different batteries.
Sent from my Mi A1 using Tapatalk
Appears the YFTK Haku Venna clone is no longer pre order and is in stock and shipping within 24hrs...On that note i have the Venna and an SXK Narda paid for and awaiting my grasp.
I have a Wasp Nano on my Inbox v3.I just got my pulse 80w today & I have an inbox. I got the pulse because it takes the 20700s & I wanted something with better battery life. We'll see soon if it was worth it. But for $50 it was worth a shot.
I also picked up a Wasp Nano & freaking love it. I put that on the inbox to see if the single coil can maybe give me better battery life with that mod, as that's my only complaint about the inbox.
Sent from my SM-G950U using Tapatalk
Wasp Nano has 6x 3mm-apart spaced wraps on 3mm ID for 0.34 Ohm build. 22w in power mode or 22w @ 420F w/TCR of 0.00111 in TC mode both give a great vape, and with LG HG2s, I get about 6 hrs of battery life chain-vaping (or ~2 refills of the squonk bottle), and with a Samsung 25R, I get about 5 hrs (or ~1.5 refills of the squonk bottle).
I have no complaints about battery life on the Inbox v3.
With the Wasp Nano, since it is so small and the coil is VERY close to the lips, you do NOT need lots of heat. I tried some single-core 26g core / 34g wrap SS316L claptons that I painfully made myself (with failing eyesight) and did not notice an increase in flavor, but had to raise the power up to 35w to decrease ramp time and compensate for the added wire mass.
Should be getting your billet panels soon I'd think.
. Sent from my Nexus 6P using Tapatalk
Sure thing!
My only issue is that I'd like to get a little tighter airflow than the smallest possible opening on the Wasp Nano for just a hair more restricted draw, Primarily to give more flavor and increase the heat to the lips slightly without needing to raise the power. An air flow similar to the Nudge 22, but sadly the Nudge 22 cap does not fit the Wasp Nano. The Nudge 22 is about as tight as I'd want to go.
I have grown accustomed to being able to see my coil thru the transparent cap on the Wasp Nano, and I like that a lot now.
6x what? 3mm-space=between-loops?
Well, it was only yesterday that I got a notice of the tracking number, and when I checked the tracking an hour ago it said 'Acceptance: CHINA' so it is still under the influence of Mandarin-speaking people right now.Should be getting your billet panels soon I'd think..
Sent from my Nexus 6P using Tapatalk
I expect to see them around July 4th.
Yes, WIDELY spaced wraps.
6 wraps, spaced 3mm apart on 3mm ID coiling rod.
Keep in mind that even 1mm spaced will cause the legs to go into the posts at an angle, I like mine to be straight to the posts (yes it is a bit OCD, LOL), and there is no spitting of juice with wide wraps, nor ever burning out the middle of the wick, and flavor is improved this way. I've been doing this for a while on lots of my builds with no ill-effects, and TC seems to work better as well.
PmedWell, it was only yesterday that I got a notice of the tracking number, and when I checked the tracking an hour ago it said 'Acceptance: CHINA' so it is still under the influence of Mandarin-speaking people right now.
I expect to see them around July 4th.
Sent from my Nexus 6P using Tapatalk
OK, (this is like pulling teeth ;-), so.. Now.. which "spoil" did you use for this wire? ;-P
