Become a Patron!
Squonkers are Bonkers
- Thread starter DogMan
- Start date
Thinking about the same for the damn CBD SPAM email I'm getting. My wife located an herbal and holistic shop just out of town off RT 21. She knows they carry CBD and has said that if I'm good enough, I might get some as a treat. Still waiting to see how that goes. Not sure we need a script here in WV, as it seems to be sold OTC.
ETA:
Re: Cotton discussion, I'm trying out some non-sterile but clean first aid type gauze pads. I like Muji Cotton which can get cheap off Fast Tech, recently bought 180 pad pack of it. Got a little rayon left as well. So far the gauze seems to do well, we'll see.
Reckon I'm out again for a bit. Run 'er slow.
Last edited:
You know I recently acquired an S rabbit clone and was actually surprised at it's performance but hate the door and big square button on it.
Also some know I bought 2 octopus clones from 3f vape and today I decided to try one of them and honestly I have nothing to say but utter garbage..my guess is those silver looking contacts are stainless steel and the 510 center pin is just a loose piece of crap...it barely made vapor on a .34 ohm build on my Haku.
Now, maybe some have seen i started a thread about upgrading the octopus clone with high end guts and i think i may cancelled that as I've done something a little different.
The guts from the S rabbit has made it's way to the octopus with only needing a slight reaming of the 510 hole and you know what?...this mod now kicks ass AND looks good..all for under $25...I even managed to get a silicone bottle in there to replace the cheap tiny hard plastic square bottle....The only thing I need to fix is slotting the contact off the 510 a little bit more so it sits back farther...I have maybe a two millimeters of button throw before it makes contact...I'd like a little bit more...the button stays nice and firm not jiggling around as well.
Pic of swap.
Also some know I bought 2 octopus clones from 3f vape and today I decided to try one of them and honestly I have nothing to say but utter garbage..my guess is those silver looking contacts are stainless steel and the 510 center pin is just a loose piece of crap...it barely made vapor on a .34 ohm build on my Haku.
Now, maybe some have seen i started a thread about upgrading the octopus clone with high end guts and i think i may cancelled that as I've done something a little different.
The guts from the S rabbit has made it's way to the octopus with only needing a slight reaming of the 510 hole and you know what?...this mod now kicks ass AND looks good..all for under $25...I even managed to get a silicone bottle in there to replace the cheap tiny hard plastic square bottle....The only thing I need to fix is slotting the contact off the 510 a little bit more so it sits back farther...I have maybe a two millimeters of button throw before it makes contact...I'd like a little bit more...the button stays nice and firm not jiggling around as well.
Pic of swap.
Last edited:
That's awesome.. You should do a step by step guide, I think lots of disgruntled Pulse owners would like to convert theirs (me includedSo decided to modify the pulse box again. Feels like it's working like it should of in the first place
Sent from my Mi A1 using Tapatalk
Last edited:
Adonis
Member For 1 Year
That's awesome.. You should do a step by step guide, I think lots of disgruntled Pulse owners would like to convert theirs (me included
Sent from my Mi A1 using Tapatalk
Thankyou . As soon as you get the plastic out it's just a case of making the contact strip. Didn't take any photos as I was going though. But anything you want to know I more than happy to help
Ohh and in case anyone got the impression that I am anti CBD. I am not. Just anti getting harassed to buy CBD Gummi Bears or the like....
What did you do to modify the button?Thankyou . As soon as you get the plastic out it's just a case of making the contact strip. Didn't take any photos as I was going though. But anything you want to know I more than happy to help
Thanks
Sent from my Mi A1 using Tapatalk
We should all rely on our Federal and State gubbmint, Advocacy Groups, Lobbys and the Benevolence of Manufacturers and Vendors.
Anyone looking at the Luxotic BF?
https://vaporider.deals/products/wismec-luxotic-bf-box-mod
Best price I've seen...
Sent from my LG-H931 using Tapatalk
https://vaporider.deals/products/wismec-luxotic-bf-box-mod
Best price I've seen...
Sent from my LG-H931 using Tapatalk
Love my Luxotic, except for the fact it leaks from somewhere in the 510. Will getting another one or two at some point.
bummer... I wanted to add myself to the list for the Cycloid v2.1, but invoicing would be in 5 days...ahwell maybe I can weasel one off someone later in time or add myself to the list later.
same price as 16 Picos lol (Black and White Delrin) or 22 for the Ultem
same price as 16 Picos lol (Black and White Delrin) or 22 for the Ultem
The one I got the positive wire had broke at the solder and kept shorting out. Will say though compared to other companies wismec handled the warranty as good as I could of hoped for.
Sent from my SM-G955U using Tapatalk
You went straight to Wismec? The fuckery at FastTech knows no bounds, and still have no resolution. Might have to try direct through Wismec.
Adonis
Member For 1 Year
I wanted to keep the button looking the same on the outside so I dremeled the back of the button off (mooch had already taken one apart so I had an idea what to expect). The button itself is insulated and has a small solid pin connected to it, I'm just using this to push the contact strip. Works well. The worst bit was reshaping the top of the squonk bottle . I used 1.2mm copper but if you used .5 or .6mm copper it would be a lot easier. Anything else or anymore pictures you want just let me know. Granted it's a bit of work but I like to make things my own
Attachments
Thanks...It really works great now...the way it came from China was just sad...the worse mod I've ever owned...barely fired a single coil atty with a freshly charged battery...the guts and 510 are absolute garbage as is the bottle....I may can salvage the tube..lol
It's a Holiday! (for some of us shoppers )
---
FastTech Memorial Day Sale (Sitewide 10% off)! Code: RESPECT
To celebrate the Memorial Day, FastTech is going to have a 1 day site-wide promotion on May 28 (US central time). All the products will be in 10% off! Grab the chance to get this big offer!
Date: 28 May 2018 00:00 - 23:59 (UTC-6)
Offer: Site-wide 10% off
Code: RESPECT
Special notices:
1. This promotion is valid on fasttech.com and m.fasttech.com.
2. Offer valid: 28 May 2018 00:00 - 23:59 (UTC-6) .
3. This offer is not to be combined with other offers.
)---
FastTech Memorial Day Sale (Sitewide 10% off)! Code: RESPECT
To celebrate the Memorial Day, FastTech is going to have a 1 day site-wide promotion on May 28 (US central time). All the products will be in 10% off! Grab the chance to get this big offer!
Date: 28 May 2018 00:00 - 23:59 (UTC-6)
Offer: Site-wide 10% off
Code: RESPECT
Special notices:
1. This promotion is valid on fasttech.com and m.fasttech.com.
2. Offer valid: 28 May 2018 00:00 - 23:59 (UTC-6) .
3. This offer is not to be combined with other offers.
Thanks RonJS.
Ordered some stuff from FT.
Ordered some stuff from FT.
Memorial day sale announced... Respect for 10% today
Sent from my LG-H931 using Tapatalk
Vape Fan
_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
It's a Holiday! (for some of us shoppers
FastTech Memorial Day Sale (Sitewide 10% off)! Code: RESPECT
3. This offer is not to be combined with other offers.
I ordered some bottles from FT. My choices were...
Authentic Eleaf Pico Squeeze PC Bottle (10-Pack) $3.15 (Ships next day)
Authentic Eleaf Pico Squeeze PC Bottle (20-Pack) $6.93 (Ships in 7 Days)
Hmmm....
Vape Fan
_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
3x10-pack?I ordered some bottles from FT. My choices were...
Authentic Eleaf Pico Squeeze PC Bottle (10-Pack) $3.15 (Ships next day)
Authentic Eleaf Pico Squeeze PC Bottle (20-Pack) $6.93 (Ships in 7 Days)
Hmmm....
Just 2 X10 packs for me....
Vape Fan
_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
oh I see. Those were the choices available, not the choices you made.
So has anyone seen or heard of the Caiman RDA,
They now have a bf version ,many Airflow plugs single coil,
looks like a mini tank by
Vapesytems RU / Caiman BF RDA,
I have the BY-KA v7 RTA by them very similar deck and Design to the RDA, interchangeable Airflow plugs,
Not cheap , but certainly looks nice , restrictive DTL or MTL,
Sent from my ONEPLUS A3003 using Tapatalk
They now have a bf version ,many Airflow plugs single coil,
looks like a mini tank by
Vapesytems RU / Caiman BF RDA,
I have the BY-KA v7 RTA by them very similar deck and Design to the RDA, interchangeable Airflow plugs,
Not cheap , but certainly looks nice , restrictive DTL or MTL,
Sent from my ONEPLUS A3003 using Tapatalk
Just Ordered the thunderhead creations Storm bf mod
3d printed nylon in blk ,
18650-21700, cells
Front sqounker, with small door, silver plated contacts,
32£, or 42usd inc shipping,
Dont think will use RDA,
But the mod looks to be durable for a daily beater,
Sent from my ONEPLUS A3003 using Tapatalk
3d printed nylon in blk ,
18650-21700, cells
Front sqounker, with small door, silver plated contacts,
32£, or 42usd inc shipping,
Dont think will use RDA,
But the mod looks to be durable for a daily beater,
Sent from my ONEPLUS A3003 using Tapatalk
Well if you are feeling super generous you can order them and have them shipped to me and I will be your bestest friend!
Last edited:
I bought 4 or was it 5 10 packs.
buy a 5 pack of the Kanger bottles and have plugs for yer Pico bottles.
Actually I have a bit of a problem with CBD being put into candy form....Well if you are feeling super generous you can order them and have them shipped to me and I will be your bestest friend!
Besides the harrasment.
I charge mine to 4.2V 25R and get about 10 ml worth of juice with a .34 coil.
Sadly, their site is fubar/down/updating/whatever. Oh well, almost pretty.
Vape Fan
_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
I charge mine to 4.2v also. Higher resitance = longer between charges, but...what's your voltage when you put it on charger?
I dunno. Chargers just have lights and change it when Pico quits working with it.
Batteries are also about 2 yrs old.
No worries.
Likely the gummies or 'candy form' is being done due to the ease of making them from standard foodie gelatin.
Edibles have over a dozen forms (that I know of), from lozenges to gum, gummies, cannabutter, brownies, cookies, teas, etc.
Something like a lozenge or gummie takes a little while to dissolve in your mouth and is absorbed more easily via the blood vessels in the tongue, and they are made also because of that the bio-availability of CBD is higher when absorbed thu the mouth than if it has to pass thru the stomach, then gets filtered by your liver and kidneys, thus the desire for such things.
Never seen packaging that reminded me of kiddie candies for these as the MMJ realm seems to avoid the nonsense of how some vape juice looks like it is marketed to children,
I wonder if the Kanger bottles would fit in the Pico2?
and could it have a flush battery cap if using 18650?
Vape Fan
_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
I don't know Kanger bottles. Same? with rod? Cut the rod?
Getting the top flush w/18650 doesn't look doable.
NM.
More than likely he's using his product and forgets he called?
That is priceless!
If you cut the rod the bottle that comes with it will not work as it seals like the old pico bottles do.
Vape Fan
_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
Hence the idea of using a diff style bottle if the rod design isn't as good as...................