I'm going to order more honestly...probably get a 10 pack and 2 more Pico's.
Become a Patron!
Squonkers are Bonkers
- Thread starter DogMan
- Start date
I'm going to order more honestly...probably get a 10 pack and 2 more Pico's.
Looks photoshopped. The USB port doesn't look right.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
I agree with the charge back and move on advice - that is BS
https://www.shopinfamousvapes.com/pages/about-us
ABOUT US
Infamous Vapes was founded on providing excellent customer service, selling 100% authentic products and premium e-liquid.
When you shop with Infamous Vapes, you are supporting a family run business.
Shipping times may not be as fast as other larger companies, as we have no staff members and Meg runs everything on her own. Your patience is very much appreciated.
We would love any suggestions, advice, reviews, and positive affirmations.
Always feel free to contact us:
[email protected]
www.facebook.com/infamousvapes
Instagram: @infamousvapes
Me thinks that is a great photoshop job!......But then again, you never know.Saw this elsewhere on the interwebs. I do not know if this is real or photoshopped,and I have no info on it. But I figured I would tease you guys anyway lol. @thecromwell @BrewBear you guys should find this interesting.
Sent from my LGMS550 using Tapatalk
I'm happy with the pico/luxotic bottle combo but I think I may shave 1mm off the very top of the metal nozzle where it slides on. I have about that much gap between the base and magnet door even after working it up as far as it'll go. It's not really noticeable but OCD and all. No doubt, it's much easier to squonk juice into the rsa now... no more squonking, waiting, waiting. Previously I was suspicious that the holes in the metal juice tube were too small, hence the slow juice flow compared to my other mods, but I guess it was the harder bottles after all.
This mod's going to look badass if I ever get my slimer green sleeve back.
This mod's going to look badass if I ever get my slimer green sleeve back.
Got my two NarDa (Coppervape) from 3F today. Clean machining, top fits nicely, put a 3 mm ID coil in it Nichrome 80 28gx2/38g fused clapton 5 wraps at 0.53 ohms. At about 1/3 air open ( kinda like what @So619Cal has in his pic) no whistles, fully open....dogs up and down the block are howling.....Nice cheap atty ($6.99) with good flavor. Might try a 2.5 mm coil in it as soon as the fog clears and I can see the rest of the room. They come with a bf pin but the darn thing doesn't protrude far enough to work in the Pico so for now at least it resides on the Wraith.
I really think the only thing lacking if anything...is a green button. That lil set up looks bitching the way it is.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Personally, I'm willing to give that some slack - but two weeks is beyond slack IMO
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Damn right - that's too long
Lucky bastard.
No clue what a Ghoul is though.
Nope but looks very Haku/Wasp like to me.At $14 I'd give it whirl.
I like mine other than the vapor on my cheeks when I purge it. I think I like the Pulse 22 better (more airflow, no hot cheeks) but the DR SQ is at home on my RSQ with a nice AVS prebuilt Tri-Core Fused Clapton SS 30GX3/38G / 3MM / 5 wrap - x1 = 0.35ohm- in TC mode at 50w/500f (the RSQ TC runs about 30-50f low).
Ya nobody gives a shit about your bullshit excuses.
It will happen soon I bet.Saw this elsewhere on the interwebs. I do not know if this is real or photoshopped,and I have no info on it. But I figured I would tease you guys anyway lol. @thecromwell @BrewBear you guys should find this interesting.
Sent from my LGMS550 using Tapatalk
http://www.eleafworld.com/news/istick-pico-21700-with-ello-launching/
The main thing is cleaning up under the switch screw head and the strap where it contacts and some deoxit or the like.My project tonight. Try to get one of these damn things to work!
Sent from my SM-G950U using Tapatalk
Last edited:
old news, they now got the pico s - http://www.eleafworld.com/istick-pico-s-with-ello-vate/
I am really surprised they don't have a proper regulated pico squonk yet.
That pic posted earlier was def a photoshop imo, but it is a good concept for how to fit the board in it. It would just make the mod a bit thicker instead of having to make it wider by putting the board on one of the ends.
That is what I told them.
Thicker to fit a 24 mm atty and 21700 battery.
And a PooPoo chip in it.
hehe yeah. not a fan of their chip anymore but I do like the pico form factor. the new pico s can fit 26mm atty's thanks to the larger battery
One of them the fire button won't come back up after firing and the other one was giving to me because it was shorting out.
Sent from my SM-G950U using Tapatalk
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
If it wasn't springing back up, either the plastic in the button was warped and can be fixed with a file or simply replacing the firing pin - the rebuild kits are under $2 I think
Hmm never had a shorting out issue...
some slight bending of the strap is needed sometimes for proper button operation.
That is really the most difficult thing with the Coppervapes.
Umm the shorting out might be a washer/insulator issue on the 510 end of the strap.
I also liked the screw that came in the repair kits better than the one that cam in my mods.
One has more threads than the other.
I also liked the screw that came in the repair kits better than the one that cam in my mods.
One has more threads than the other.
Yeah but I just woke up like an hour or so ago.Give me a break.Not sure I would want that kit you linked anyhow.Damn cloud chucking tank and a wonky looking mod.
Basic 1.1 came in yesterday and just finally got a build in it. Airflow is similar to a Haku closed down about 1/3 of the way. First top airflow RDA I've ever really enjoy. Flavor is outstanding.
Sent from my SM-G965U using Tapatalk
Sent from my SM-G965U using Tapatalk
A little very fine sandpaper on the contact surfaces helped mine a lot.
Sent from my LG-H931 using Tapatalk
I dunno... I'm not a fan of the Gene chip... Never was...
Sent from my LG-H931 using Tapatalk
yeah I use 300 grit black wet sand sandpaper.
Then clean with qtip and isopropyl and then apply a no ox substance.
My Coppervapes are quite neglected now since I discovered Picos.
I expect to sometime silver electroplate the conducting parts in them.
Thank you.
I'm going to watch some reviews of it later.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
I’m ok with the chip for wattage vaping, but their TC sucks. I would definitely pick up a regulated Squeeze.
If you set your own custom TCR in one of the memory settings, M1, M2 or M3, and try 0.00096, 0.00111 or 0.00120 with your ss316L, you may find that it responds better than whatever default built-in TCR it is using for SS wire.
I find that the 0.00111 works well in the original Pico 75w on the stock firmware, and is on par with my DNA devices for ss316L wire from 'Master Of Clouds'...
I would prefer and 18650 regulated squeeze but would likely get one that took a larger cell.
As long as they come in white
As long as they come in white
Use care with the dialectic grease. It can be over done and cause issues by turning into gunk. Been learning this myself. Not saying to not use the stuff, just do so with care.
I love mine, but I'm new to all this, so...might not mean much.
Sent from my SM-N900T using Tapatalk
Blasphemer! You owe the church of Coppervape one goat, or jar of creamy peanut butter.
We all were "new at this" at some point in time. Your opinion counts, just give us a tad bit more detail. What coil, how much air, cloud chucker or flavor machine....you get the idea. Some of us like more air than others so every bit helps.
Oh yeah, I've been running it with a 0.25ohm build (premade coils, tank tracks) at 45W. I prefer a good amount of air flow, which it provides but it is easily adjustable. It's super easy to build on & to get the coils lined up with the air slots. No whistling, which I greatly appreciate. I do wish the squonk pin didn't suck back all the juice in the well, but there is plenty of spacing for wicking to offset that a bit. The only true negative in my opinion is that the drip tip is a bit of a loose fit. I'm thinking about getting a Tfv8 drip tip since the O-ring will create a tighter fit.
Sent from my SM-N900T using Tapatalk
With squonk setups there's a bit of give and take. Traditional squonk rda types have either a flat deck or slightly concave with a very shallow juice well that allows the excess juice to drain back in the bottle thus eliminating spills (mostly, not talking about over squonking which we all do to some degree), but you have to squonk more often. On the other hand, you don't have to drip at all and that is a plus, especially while driving (don't ask how I found that out). If you like the drip tip, a couple of wraps of dental floss under the o-ring will take up the wiggle room.