Become a Patron!

Squonkers are Bonkers

DogMan

VU Donator
Diamond Contributor
Member For 5 Years
No idea, Lucy. SQR takes cappable bottles, but Lee just got confirmation that the chemo won't work and there is nothing more they can do. So second hand and more than $50.

Dicodes options though
eaa956cbcfce57952f3c41bc7572ed72.jpg
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
No idea, Lucy. SQR takes cappable bottles, but Lee just got confirmation that the chemo won't work and there is nothing more they can do. So second hand and more than $50.

Dicodes options though
eaa956cbcfce57952f3c41bc7572ed72.jpg

Dang, you mean someone is stage 4 and needs to sell their squonker?
 

DogMan

VU Donator
Diamond Contributor
Member For 5 Years
Dang, you mean someone is stage 4 and needs to sell their squonker?
No. The modder is terminally ill.

But the mods sometimes come up second hand in DNA75, dicodes or mech. They have bottles that seem appropriate if I understand correctly.

I don't fly though
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
No. The modder is terminally ill.

But the mods sometimes come up second hand in DNA75, dicodes or mech. They have bottles that seem appropriate if I understand correctly.

I don't fly though

Yes, have seen them and seriously almost lost my mind a few times, lol

Sorry to hear an artist like that is going down
 

snake94115

Diamond Contributor
Member For 4 Years
Didn't you pick her a blue RSQ? Perhaps you could mix things up a bit or maybe she really loves blue.. ?

That green just makes me want to jump on a kawasaki supersport and break the sound barrier. Looks so nice with that matching tip.
I haven't gotten her anything yet.And yeah she loves blue stuff especially royal/deep blue.Think (Maxfield Parrish)
 

snake94115

Diamond Contributor
Member For 4 Years
@snake94115 , not to rain on your parade or anything like that, but do you feel comfortable with mech. mods? Most of the ones you've been making goo goo eyes at are mechs. Please make sure you feel at ease with them before venturing any capital. Just a friendly suggestion.
Yeah I know.
I've owned a few mechanical mods/devices.And I'm well aware of (Ohm's Law) and have a decent understanding of battery safety.

I only use Mooch approved batteries for mechanical's.
 

snake94115

Diamond Contributor
Member For 4 Years
Here is what I would settle for regulated-wise: a Wraith that doesn't fall apart
The door isn't the part that bugs me.What bugs me is the damn bottle will not stay seated.At least on the 1 I looked at didn't.
Even the owner of the store gave up trying to get it seated properly.
 

fartbubble

Silver Contributor
Member For 3 Years
Member For 2 Years
Just saw your edit.

You know davinci are just up market clones, right?

I'm fine with clones, but not €200 clones


Don’t mind the engraved stuff from them



Apparently needed Flavorah’s tobacco line. Bought 7 of them in my sleep
 

CactusFanaticus

Silver Contributor
Member For 2 Years
Morning bonkers
IMG_0132.gif

Picked up a couple more wasps, OG goons and some extra wicking tools for on the go from FT sale. Waiting till Thursday my favorite nic site is having a sale and they never charge me “Hasmat ground” like others do.

Stocked up on mods, especially copper tubes even though there are a couple I have my eye on, trying to play it smart and just get stuff I need ATM instead of want to ensure I’ll be vaping years to come regardless of any new laws they may decide to slap us with in the future.

Hard to resist the shiny and buy shit like spools of wire and nic instead, damnit.
 

gadget!

"The Trader"
VU Donator
Platinum Contributor
Member For 5 Years
VU SWAT
VU Patreon
Nothing spectacular for regulated squonkers, that's for sure

Still waiting for somebody to come up with a decent regulated squonker for long distance travel -

Was considering that MVP deal on the hotcig rig, but kinda vowed would not spend more than $50 on any mod that isn't exactly what I need

Here is what I would settle for regulated-wise: a Wraith that doesn't fall apart

They were perfect for flying. Pull out the bottle, put the cap on it and put the bottle in the stupid ziplock baggie for liquids for carry on

Before landing, you pop it back in the mod and you are ready to fog up the nearest bathroom

Coulda lived with the Therion, but the battery life is so poor that it is seriously impractical for being on the road
I think the Capo might work for you but the bottle doesn't have a cap so you would have to figure something out there, a way to cap it off.
I haven't had mine long enough to get a feel on battery life yet.
For traveling I would personally use a single coil Pulse RDA on it, for me they are the closest thing to being leak proof than any RDA I've used and you will get better battery life out of a single coil.

On the Therion, @CrazyChef 20 gave me a tip for better battery life. Less wire and single coil.
I was using up 2 batteries with every bottle, I switched to a Pulse 22 and now I can empty the bottle with one battery.

Sent from a Galaxy far far away!
 
Last edited:

BrewBear

Platinum Contributor
Member For 4 Years
No idea, Lucy. SQR takes cappable bottles, but Lee just got confirmation that the chemo won't work and there is nothing more they can do. So second hand and more than $50.

Dicodes options though
eaa956cbcfce57952f3c41bc7572ed72.jpg
Very nice. I'll just have to keep an eye out for these.
 

jasonandsarah

Gold Contributor
Member For 3 Years

jasonandsarah

Gold Contributor
Member For 3 Years
Anyone got a line on where to get Little Orca doors other than directly from Floris Box?? I need a couple


Sent from my iPhone using Tapatalk Pro
Minimalsaint? I bet you could contact some of the custom door makers on fb as well?

Sent from my SM-G955U using Tapatalk
 

AndriaD

Yes, I DO wear a mask! I'm vaccinated, too!
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
@snake94115 , not to rain on your parade or anything like that, but do you feel comfortable with mech. mods? Most of the ones you've been making goo goo eyes at are mechs. Please make sure you feel at ease with them before venturing any capital. Just a friendly suggestion.

That's kinda my own problem.... The ones I like the looks of the best, are pretty much all mechs. The only mechs I can use are the tube-style, so I can use a Kick to bring it to my 9.5w and keep it there. :confused:

I do like the looks of the new Sigelei one, though. A 5ml bottle isn't a problem for me, since that's about a day's vape for me; their pricetag is a bit more of a problem though. Also I think I read in their specs that the lowest wattage they'll do is 10w, and that's unsat. :mad:

Andria
 

snake94115

Diamond Contributor
Member For 4 Years
That's kinda my own problem.... The ones I like the looks of the best, are pretty much all mechs. The only mechs I can use are the tube-style, so I can use a Kick to bring it to my 9.5w and keep it there. :confused:

I do like the looks of the new Sigelei one, though. A 5ml bottle isn't a problem for me, since that's about a day's vape for me; their pricetag is a bit more of a problem though. Also I think I read in their specs that the lowest wattage they'll do is 10w, and that's unsat. :mad:

Andria
I don't think a kick would work in a mechanical squonker.
I could be completely wrong though.
 

AndriaD

Yes, I DO wear a mask! I'm vaccinated, too!
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
I don't think a kick would work in a mechanical squonker.
I could be completely wrong though.

Nah, you're right; the Kick has to contact the metal tube; box mods don't have a tube for the Kick's contacts to meet.

Andria
 

AndriaD

Yes, I DO wear a mask! I'm vaccinated, too!
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
The coppervape does but too short for a kick and an 18650.

yeah? I've got some 18500s, got 'em when I got the Kicks. :D They're kinda old now, but I never used them very much, and they're AWs, so they should still be good. I had one in my Sigelei Zmax flat-top recently and it worked fine.

Andria
 

BrewBear

Platinum Contributor
Member For 4 Years
I think you were a bit modest with that $120+

I don't think it will go for anything below $350


Sent from my iPhone using Tapatalk
That's more in line with I was thinking. Upper 200 at the very least. I' guessing there will be "special, limited runs" going for more than that too. The next thing will be an atty paired with the mod.....
 

Sonar505

Silver Contributor
Member For 4 Years
Member For 3 Years
Modder
@AndriaD If you are interested in using a Kick in a box mod squonker I am pretty sure I could do one for you. Either with a mechanical switch or with a regular switch. and it would only cost $60. If you are interested let me know. By the way a kick would only add 3/4 " or 20mm to the height of the box with an 18650.
 

AndriaD

Yes, I DO wear a mask! I'm vaccinated, too!
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
@AndriaD If you are interested in using a Kick in a box mod squonker I am pretty sure I could do one for you. Either with a mechanical switch or with a regular switch. and it would only cost $60. If you are interested let me know. By the way a kick would only add 3/4 " or 20mm to the height of the box with an 18650.

I'll definitely let you know! Maybe next July, for my 4 yr no-smoke-a-versary -- that's about the only occasion for which I wouldn't mind spending that much on a mod. :D (I've earned it! :D)

Andria
 

Sonar505

Silver Contributor
Member For 4 Years
Member For 3 Years
Modder
I'll definitely let you know! Maybe next July, for my 4 yr no-smoke-a-versary -- that's about the only occasion for which I wouldn't mind spending that much on a mod. :D (I've earned it! :D)

Andria

Ok no problem I completely understand. Just let me know when you are ready. I just wanted to put another option out there for you as it seems you were getting frustrated with the offerings that would fit with your particular style of vaping. So all good. If you have any questions or would like some other options just let us know
 

AndriaD

Yes, I DO wear a mask! I'm vaccinated, too!
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
Ok no problem I completely understand. Just let me know when you are ready. I just wanted to put another option out there for you as it seems you were getting frustrated with the offerings that would fit with your particular style of vaping. So all good. If you have any questions or would like some other options just let us know

I really would LOVE to have one of the beautiful mods you create -- have you done any in a "blonde" sort of wood? That's my favorite wood finish/color; I think I've seen some driptips like that, but since I had nothing they would match, I've given them a miss.

Andria
 

Sonar505

Silver Contributor
Member For 4 Years
Member For 3 Years
Modder
If this is what you are talking about. Then yes. if not then let me know so can point you to some of my threads thay show some of the woods I have used in the past.
N1xguHW.jpg
 

R3alJim Shady

Platinum Contributor
Member For 4 Years
Minimalsaint? I bet you could contact some of the custom door makers on fb as well?

Sent from my SM-G955U using Tapatalk

I actually spoke with him over FB and there is a gentleman making stab wood doors but he’s in Europe. I might as well buy the ones from Floris then. I’ll keep looking!


Sent from my iPhone using Tapatalk Pro
 

bx10r

Platinum Contributor
Member For 4 Years
Here is my off-the-cuff solution to the almost crunchy DripTech bottle

Take a silicone YFTK bottle and gently maneuver the hard tube included with the Driptech mod into the tubing of the replacement bottle with the cap still on

View attachment 95321 \\


Once it is threaded in a quarter inch or so, cut the tubing and continue to gently push the hard tube through the soft tube and cap until it is the the proper length where the hard tube reaches the bottom of the replacement bottle. Place the included stock cap from the crappy bottle upside down on top of the metal tube - it seals perfectly (so far) and fits into the bottom of the 510 much more snugly than if you place it right side up like you do with the stock bottle. No leaks so far

View attachment 95322

is this working for ya? this ts bottle is so hard. I only have a vandy vape pulse bottle an its to big of a diameter for the mod. Suggestions of somewhere to get the same size to try this? In the U.S
 

AndriaD

Yes, I DO wear a mask! I'm vaccinated, too!
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
If this is what you are talking about. Then yes. if not then let me know so can point you to some of my threads thay show some of the woods I have used in the past.
N1xguHW.jpg

Yes, something very much like that! Really gorgeous -- I wish my kitchen cabinets were like that! :D

Andria
 

fartbubble

Silver Contributor
Member For 3 Years
Member For 2 Years
Engraved is the SE box clones


oh?

Didn't really ever check on the pro version. What's the difference besides the wire holder?

Sent from my SM-G955U using Tapatalk


yeah, it's all in the wire guide. Probably should have just bought that instead of the full kit.


I would have totally bought this (if I had 850 euros to burn that is)
yamoto.jpg yamoto2.jpg
 

~Don~

Platinum Contributor
Member For 5 Years
Sort of glad I waited on the Molly V2.

Going to PM Ludovic and ask how much it would be just for the Delrin enclosure and the 510 milled for a ModDog Nano 16. (1mm shelf instead of a .5mm)
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
is this working for ya? this ts bottle is so hard. I only have a vandy vape pulse bottle an its to big of a diameter for the mod. Suggestions of somewhere to get the same size to try this? In the U.S

I use the squishy FT bottles - which saved us all from the tyranny of bad Italian softies and outlandingly priced Cappies

But, mod maker bottles will work if you can find a US vendor with them in stock - most bottles should fit and work like I showed

Surprised someone here hasn't jumped in with a US vendor suggestion :)
 

fartbubble

Silver Contributor
Member For 3 Years
Member For 2 Years
I use the squishy FT bottles - which saved us all from the tyranny of bad Italian softies and outlandingly priced Cappies

But, mod maker bottles will work if you can find a US vendor with them in stock - most bottles should fit and work like I showed

Surprised someone here hasn't jumped in with a US vendor suggestion :)

http://brosciencevapes.com/mm-squonker-bottle-kit/


Cheap Cappys are finally here. About the same price as standard Chinese bottles ($5-7)
 

bx10r

Platinum Contributor
Member For 4 Years
I use the squishy FT bottles - which saved us all from the tyranny of bad Italian softies and outlandingly priced Cappies

But, mod maker bottles will work if you can find a US vendor with them in stock - most bottles should fit and work like I showed

Surprised someone here hasn't jumped in with a US vendor suggestion :)
Ok, gonna look now

Sent from my SM-G950U using Tapatalk
 

VU Sponsors

Top