Become a Patron!

Squonkers are Bonkers

fartbubble

Silver Contributor
Member For 3 Years
Member For 2 Years
What's the svf drama? Lol I love my svf squonk

Sent from my SM-G955U using Tapatalk


Antonio ran an interest post on doing a list & Alben dropped a post saying there is going to be a list for Christmas which lead to Antonio saying that he has nothing to do with these mods & said they’re old 510s.


Then you’ve got the other to run quickstrikes for 3rd party doors
 

BrewBear

Platinum Contributor
Member For 4 Years
Yup they went bonkers
784a7055481d9c8784f620691a3b0426.jpg


Sent from my SM-G950U using Tapatalk
Is there a pre-order for this? Does it take 2x700 batteries?
 

AndriaD

Yes, I DO wear a mask! I'm vaccinated, too!
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
PP is giving me big grief at the AllianceTech site :mad:

The site obviously got my account and husband's account confused and now it won't pay

They give my husband grief, because his phone is in his company's name, since they provide it... and our home number is in my name, so they won't verify him based on phone number. I told him he could link the bank acct to verify, but he isn't willing -- despite that I have the bank acct linked to my PP acct and have never had a problem.

Andria
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
They give my husband grief, because his phone is in his company's name, since they provide it... and our home number is in my name, so they won't verify him based on phone number. I told him he could link the bank acct to verify, but he isn't willing -- despite that I have the bank acct linked to my PP acct and have never had a problem.

Andria

I think it is AllianceTech's website - it is the one showing a commingling of accounts

Here is the thing: when the titanium Flave was coming out in a very limited edition, I told him I was going to try to get up in the middle of the night to get one when they went on sale, French time - which I did and. bought two

He gets up at the crack of dawn, assumed there is no way in hell I actually got up at 3 a.m. and sweetie that he is, goes to the website, opens an account and bought me two - unaware I had already actually done it

So now there are two similar accounts with the company with overlapping information and the program it uses obviously is not very good if it is confusing everything to the point it give PP information that makes it not want to pay up :confused:
 

AndriaD

Yes, I DO wear a mask! I'm vaccinated, too!
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
I think it is AllianceTech's website - it is the one showing a commingling of accounts

Here is the thing: when the titanium Flave was coming out in a very limited edition, I told him I was going to try to get up in the middle of the night to get one when they went on sale, French time - which I did and. bought two

He gets up at the crack of dawn, assumed there is no way in hell I actually got up at 3 a.m. and sweetie that he is, goes to the website, opens an account and bought me two - unaware I had already actually done it

So now there are two similar accounts with the company with overlapping information and the program it uses obviously is not very good if it is confusing everything to the point it give PP information that makes it not want to pay up :confused:

Geez, I can't decide if that's a net win or a net loss -- great that your husband is actually that www-savvy (mine says he is a "www-dot-idiot", because it's true!), but I can see that having 4 of the same expensive RDA isn't a great thing. :D

Andria
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Geez, I can't decide if that's a net win or a net loss -- great that your husband is actually that www-savvy (mine says he is a "www-dot-idiot", because it's true!), but I can see that having 4 of the same expensive RDA isn't a great thing. :D

Andria

Well - I traded two of them for two different but also great squonk things ;)
 

derrickfosgate

Gold Contributor
Member For 4 Years
Just got to mess with a pulse that sucker was pretty sweet like it better than some of my higher end mods looks like im gettin one so ill have my 528 orca biohaze nuda haku cruiser and phenom and b2k yea im done for a week or 2

Sent from my SM-G950U using Tapatalk
 

shawn.hoefer

Gold Contributor
Member For 4 Years
So... after all that..... the 20700 are better for regulated but not so much mech?

Sent from my LG-D850 using Tapatalk
At the risk of repeating myself, I love 20700s in my mechs. I don't build stupid low... well within the tolerances of the cell, and I get a solid half day of dripping out of my mechs. In another test, I can empty the bottle in a Pulse with a single cell... batteries have come out at between 3.5 and 3.6 V when I fill the bottle.

My builds are typically in the .15 ohms range... 2x26/32 Ni80, 5 wrap, 3mm.

Sent from my SAMSUNG-SM-N910A using Tapatalk
 

derrickfosgate

Gold Contributor
Member For 4 Years
Wonder if we all got the same tracking number lol Seriously though it's kinda funny we was all talking earlier and now all of us got tracking.....

Sent from my SM-G955U using Tapatalk
I sure hope not im just pissed that people after me got theres last fn week im done with that group to much this and that i mean shit i think he had the attys almost 2 weeks ago well now i got a conformation on the italian nuda squonk shit forgot about that one anybody wanna lend me some cash lol almost 5 hundo in 2 weeks im fired

Sent from my SM-G950U using Tapatalk
 

fartbubble

Silver Contributor
Member For 3 Years
Member For 2 Years
I sure hope not im just pissed that people after me got theres last fn week im done with that group to much this and that i mean shit i think he had the attys almost 2 weeks ago well now i got a conformation on the italian nuda squonk shit forgot about that one anybody wanna lend me some cash lol almost 5 hundo in 2 weeks im fired

Sent from my SM-G950U using Tapatalk


I’ll take the Nuda
 

PaulS

Gold Contributor
Member For 5 Years
I saw this. Heathen made a comparison between this and the mesh rda. I honestly rather have this one since it has a good amount of juice well for wicking properly.
My problem with the mesh is that it ohms out way to low for my taste. I don't like to vape above 25 watts.
 

PaulS

Gold Contributor
Member For 5 Years
The mesh ohms out at .2 or so. I like single coils above .6 ... I found I needed to vape at 45 - 60 watts on my squonks with the mesh.
 

Bardiel003

Silver Contributor
Member For 2 Years
Member For 1 Year
Another day, another Haku experimentation lol 4mm 5 wrap alien. I'm stopping by home depot tomorrow for kanthal wires for simple builds. The alien spool will be my last unless for dual bigger deck builds.
1a3c0256b544cc3471f416c0cabcb1ee.jpg
8f83bb2be8eec774f4a76fb9e2ef8526.jpg
 

fartbubble

Silver Contributor
Member For 3 Years
Member For 2 Years
Buying a cheap lens kit for my phone was a bad idea. Going to inevitably use to to figure out if I need to clean my coils


78063079-7EFB-4384-B221-447EB71A323E.jpeg
 

MyMagicMist

Diamond Contributor
ECF Refugee
Member For 5 Years
My builds are typically in the .15 ohms range... 2x26/32 Ni80, 5 wrap, 3mm.

Reads as a nice build. Will stick with something around 0.30 for now myself. Getting a better feel using SS316 and hand winding plain Claptons. I'm just using 28 awg all around as for me presently it's in the learning & not minding a little waste.

I say with this with utmost humility, might eventually become an artisan at building coils. Sure, I know such a goal may seem a bit low end given there's tools, factories even churning out coils. I see it as being at least something I can hone to mastery while mastering stress as well. Hand winding certainly tries patience. :)
 
Last edited:

fartbubble

Silver Contributor
Member For 3 Years
Member For 2 Years
Lmao! Macro bokeh is not so bad. Just distance and work on focusing lol. And it's not... Too bad lol


Yeah, focusing is a pain in the ass on the iPhone. Taking pics in a dark room doesnt help.

I don’t like how you have to use the super wide with the macro together as it gives you some funky artifacts
 

BrewBear

Platinum Contributor
Member For 4 Years
@BrewBear have you seen the Digiflavor Mesh PRO RDA?

Digiflavor-Mesh-PRO-RDA-1-600x600.jpg
Sure did! It looks interesting but those deeeep juice wells aren't a squonk dream. Yes, the wick is saturated but I think the juice will pool in the wells rather than drain back in the bottle ( look at the pic. with the protruding bf pin) My main reason for getting the Mesh in the first place was because the deck looked like a bigger Nuppin deck kinda ( but not quite). I'll stick with the Nuppin.
 

BrewBear

Platinum Contributor
Member For 4 Years
My problem with the mesh is that it ohms out way to low for my taste. I don't like to vape above 25 watts.
What types of mesh did you try in it? 3F is now selling Ni80 (1.8 ohm/ft), Kanthal (2.8 ohm/ft) and 2 flavors of 316L ss mesh ( 1.2 and 0.9 ohm/ft respectively)
 

fartbubble

Silver Contributor
Member For 3 Years
Member For 2 Years
Rip low lighting lol! And it doesn't have manual focus or a/f lock? (thank God for Android we do hehe)

They removed the manual focus as far as I can tell. And no matter what, everything blows out the bokeh & colors. Throw in that the lens just clips on so it blocks a lot of the light and yeah... bout the best I can without really trying is something like this. Shaking hand doesn’t help but $15, it could have been worse
CE520F47-1F0F-4FF3-851F-EFA38AA538E7.jpeg
 

BrewBear

Platinum Contributor
Member For 4 Years
20160523_185429.jpg Hey @So619Cal , what did your wife bring you from Porto's? I'm going there tomorrow after work....I think I'll try the one in Burbank, the one in Glendale is where I usually go to but the lines are insane!
You might want to try one of these next strawberry season
 
Last edited:

Bardiel003

Silver Contributor
Member For 2 Years
Member For 1 Year
Sure did! It looks interesting but those deeeep juice wells aren't a squonk dream. Yes, the wick is saturated but I think the juice will pool in the wells rather than drain back in the bottle ( look at the pic. with the protruding bf pin) My main reason for getting the Mesh in the first place was because the deck looked like a bigger Nuppin deck kinda ( but not quite). I'll stick with the Nuppin.
Oh shit I didn't even think of that! Even if I over cotton it. Distance from well to coil would be too far =/
 

PaulS

Gold Contributor
Member For 5 Years
What types of mesh did you try in it? 3F is now selling Ni80 (1.8 ohm/ft), Kanthal (2.8 ohm/ft) and 2 flavors of 316L ss mesh ( 1.2 and 0.9 ohm/ft respectively)
Mesh came with the RDA - the Vandy Vape one. Put a piece in and see. I al;so found it was a juice hog TBH. Do not like it.
 

~Don~

Platinum Contributor
Member For 5 Years
View attachment 96975 Hey @So619Cal , what did your wife bring you from Porto's? I'm going there tomorrow after work....I think I'll try the one in Burbank, the one in Glendale is where I usually go to but the lines are insane!
You might want to try one of these next strawberry season


Cubano, a dozen potato balls, dozen of those cheese ma doodles thingymabobs, Guava roll...6 Chicken Croquettes

Edit: Is that Donutman I see there?
 

VU Sponsors

Top