Become a Patron!

Need coil build advice

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
Moved to new builders corner might get more hits there and OP as Honda asked it will help to give a few more details ;)
 

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
Can you make fused Clapton’s George?

28g dual core with 38g wrap ramps up quickly and you’ll get a decent cloud
 

HondaDavidson

Gold Contributor
Member For 4 Years
Type size and grade? I don't understand , I forgot to say that it was 28g if thats what you're looking for
Type plain twisted or wrapped wire... claptons are wrapped wire...
Size wire guage..
Grade type of metal.

Should also ask is current build single or dual coil. And what wattage you run it at.. and how open is the air....


See we have to know you current state of vape to suggest something different.

Sent from my SCH-I605 using Tapatalk
 

HondaDavidson

Gold Contributor
Member For 4 Years
I currently have a 28awg stainless single coil in my Avocado at 1.1ohms. I get great flavor and descent vapor..at 15 watts or a bit more. but i also DIY my juice so can adjust that to work with most builds.

Sent from my SCH-I605 using Tapatalk
 

GeorgeTz6

Member For 2 Years
Can you make fused Clapton’s George?

28g dual core with 38g wrap ramps up quickly and you’ll get a decent cloud
No, haven't even tried, they seem way too hard to build... But I have built some diamond coils, google it if you don't know what it is
 

GeorgeTz6

Member For 2 Years
Type plain twisted or wrapped wire... claptons are wrapped wire...
Size wire guage..
Grade type of metal.

Should also ask is current build single or dual coil. And what wattage you run it at.. and how open is the air....


See we have to know you current state of vape to suggest something different.

Sent from my SCH-I605 using Tapatalk
Ok, I have a single SS316L round wire built, it's 28g, 3mm inner diameter, 6 spaced wraps. It comes out at about 0.5ohm and I run it at 25-35watts
Airflow half way open on my avocado 24.. I have no clue what "Grade type of metal" is... I'm still learning some things...
 

gbalkam

Gold Contributor
Member For 4 Years
ECF Refugee
Reddit Exile
No, haven't even tried, they seem way too hard to build... But I have built some diamond coils, google it if you don't know what it is
A lot of new builders find this thread useful...
http://vapingunderground.com/threads/how-to-build-you-first-basic-coil-for-new-vapers.298828/
Start simple
Also when starting out, clapton wire for 1 coil at a time (say.. 8 inches) It is much easier to work with and you can do it free hand without a spindle set up.
Slow and steady for the win. Speed comes with practice.
Stick to 28g or lower for your core wire. Higher gauges tend to twist a lot.
 
wtf guys just give him some builds lol

ss316L 26g parralel 5 wraps dual coil 3mm id ohm at .1 or if you use 28g it will come out around .15 both will be dense with nice ramp
 

Zohmbiebuilds

Silver Contributor
Member For 3 Years
Nichrome 60 24g dual parallel 8 wraps keep it as close to your posts as possible without touching. Comes out to .15ish. I use a precision screw driver its 3mm

Sent from my Z981 using Tapatalk
 

Zohmbiebuilds

Silver Contributor
Member For 3 Years
Nichrome 60 24g dual parallel 8 wraps keep it as close to your posts as possible without touching. Comes out to .15ish. I use a precision screw driver its 3mm

Sent from my Z981 using Tapatalk
No ramp up. Nice n quick dense vape

Sent from my Z981 using Tapatalk
 

VU Sponsors

Top