Become a Patron!

Mechanical pics!

Celtic Fog

Celtic Fog

Tir Na Nog
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Tesla makes clones, TOBH is an authentic rda maker, tobh is an ancient Hebrew word for "Good".
An authentic TOBH will cost anywhere from 80 to 140 dollars and are not the easiest to find.
 
visionz

visionz

Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
2014-11-15 00.05.18.jpg
Celtic Fog said:
Tesla makes clones, TOBH is an authentic rda maker, tobh is an ancient Hebrew word for "Good".
An authentic TOBH will cost anywhere from 80 to 140 dollars and are not the easiest to find.
Click to expand...


Not trying to hijack the o.p. but is it weird for mine to say TOBH mods V2 2014 on the bottom like this.
 
Last edited:
Celtic Fog

Celtic Fog

Tir Na Nog
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
not at all...good way to tell original Tobhs is the deck (cool looking swirly pattern), check out this link and you can compare pics, Tobhs also come with oxidized screws and orange red orings. You might have an original, most people have to get on a list to buy one and as far as I can tell, only 2 places sell them.
Here is the link to his site.
http://tobhmods.com/

vaporology is the store that usually sells them when they come out.
http://shop.vaporologie.com/

and here is the link to Tobh mods facebook.
https://www.facebook.com/TobhModsPage

Here is the pic of what a Tobh atty deck looks like.
1526804_563498503742745_425178073_n.jpg
 
TheWestPole

TheWestPole

Gold Contributor
Member For 4 Years
franciscan said:
Arrived Today:

ZDyse6S.png

GXYkEn8.png

The R-Box by Rave Modz
Made in the Philippines...and bloody good kit with only .04 voltage drop.
Click to expand...

Very nice. I especially like the cinched waist.
 
Celtic Fog

Celtic Fog

Tir Na Nog
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
ok, last photo I will post of my baby, I redid the red paint and matched it up to a new chuff cap I got for her, then I added a custom blue set of stripes to match the blue that is in the patina on the atty....going to make a charm set for her too, but probably not till after the holidays lol. For now, she will sit like this until my next project (come on santa!)
Vanilla clone, Atty clone v2.0, red chuff cap, copper patina done with ammonia and salt, custom paints mixed by me.
20141121_202031.jpg
 
Celtic Fog

Celtic Fog

Tir Na Nog
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
mbonanni said:
First post!

Just finished up this hades clone. First time doing patina. Posting from my phone so hopefully this works.

111358j.png
Click to expand...
niiiiiiice~ I love the patina look! and you did a great job!
 
vaping_bitch6969

vaping_bitch6969

Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
My derma with the igow6

Sent from my SGH-T959V using Tapatalk 2
 

Attachments

  • uploadfromtaptalk1416900202319.jpg
    uploadfromtaptalk1416900202319.jpg
    80.3 KB · Views: 50
  • uploadfromtaptalk1416900245467.jpg
    uploadfromtaptalk1416900245467.jpg
    79 KB · Views: 48
  • uploadfromtaptalk1416900374712.jpg
    uploadfromtaptalk1416900374712.jpg
    79 KB · Views: 45
  • uploadfromtaptalk1416900459930.jpg
    uploadfromtaptalk1416900459930.jpg
    78 KB · Views: 47
TheWestPole

TheWestPole

Gold Contributor
Member For 4 Years
Always liked this simple concept and emulated it in a couple of my mod projects. Couldn't see paying up for it at $100 plus.


Screenshot 2014-11-28 at 5.56.21 PM.png


Well, looks like a few weeks back this came out on FT.


Screenshot 2014-11-28 at 5.51.38 PM.png


Ordered a couple to check them out. Will post my comments when they come in.
 
Last edited:
rdwilliamson

rdwilliamson

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
TheWestPole said:
Always liked this simple concept and emulated it in a couple of my mod projects. Couldn't see paying up for it at $100 plus.


View attachment 9500


Well, looks like a few weeks back this came out on FT.


View attachment 9502


Ordered a couple to check them out. Will post my comments when they come in.
Click to expand...
Let us know for sure. I have a mod I wouldn't mind using this on.


Sent from my educated phone using tapatalk
 
Obi

Obi

Member For 4 Years
My newest favorite badass..
I love them very much...
 

Attachments

  • uploadfromtaptalk1417576681373.jpg
    uploadfromtaptalk1417576681373.jpg
    635.7 KB · Views: 42
TheWestPole

TheWestPole

Gold Contributor
Member For 4 Years
Just received two of these. Outward appearance, build quality and materials are good. Inside is not so good, though fixable. Two main warnings before you buy:

1) The atomizer contact pin is a slotted copper screw. However, it is not adjustable. The far end of the screw inside the base is soldered to the positive contact wire. It will turn a bit, but if you turn it too much the solder point will snap. Many have done this and learned the hard way that the atomizer contact screw is false advertising. :mad:

2) The mod contact pin is indeed adjustable. However, support behind the fitting it screws into inside the base is weak. The bad one I received had no support at all, so if I try to unscrew to raise the contact it doesn't move. This I will have to fix by opening op the bottom cover of the base, which is interference fit and not easy to remove. :(



screenshot-2014-11-28-at-5-51-38-pm-png.9502



That said, I'm keeping these and getting another. It's a clone, so as usual I expect to finish it myself. While I am at it I'm going to upgrade the atomizer contact with a $2 spring loaded core from Fatdaddyvapes. Those little buggers really come in handy. :D


PC112079 edit.jpg PC112073 edit.jpg


Orchid V4, Ignition clone base, Caravela 18350. Assembled height w/o drip tip is 74mm.
 
Last edited:
TheWestPole

TheWestPole

Gold Contributor
Member For 4 Years
New on FT. Description does not mention spring-loaded but I'm assuming they are. I have nothing but respect for Fatdaddy, but these have always had a better, cleaner look IMO.

510.png
 
D

Donald Bickers

Guest
TheWestPole said:
Just received two of these. Outward appearance, build quality and materials are good. Inside is not so good, though fixable. Two main warnings before you buy:

1) The atomizer contact pin is a slotted copper screw. However, it is not adjustable. The far end of the screw inside the base is soldered to the positive contact wire. It will turn a bit, but if you turn it too much the solder point will snap. Many have done this and learned the hard way that the atomizer contact screw is false advertising. :mad:

2) The mod contact pin is indeed adjustable. However, support behind the fitting it screws into inside the base is weak. The bad one I received had no support at all, so if I try to unscrew to raise the contact it doesn't move. This I will have to fix by opening op the bottom cover of the base, which is interference fit and not easy to remove. :(



screenshot-2014-11-28-at-5-51-38-pm-png.9502



That said, I'm keeping these and getting another. It's a clone, so as usual I expect to finish it myself. While I am at it I'm going to upgrade the atomizer contact with a $2 spring loaded core from Fatdaddyvapes. Those little buggers really come in handy. :D


View attachment 10200 View attachment 10201


Orchid V4, Ignition clone base, Caravela 18350. Assembled height w/o drip tip is 74mm.
Click to expand...
Very Sharp looking,,,i just don't know if I would like where the fire button is located
 
TheWestPole

TheWestPole

Gold Contributor
Member For 4 Years
Donald Bickers said:
Very Sharp looking,,,i just don't know if I would like where the fire button is located
Click to expand...

Yeah, Don, not for everybody. I personally can't stand bottom firing tube mods, nor long rigs, so side-by-side is kinda my thing. Comes out of searching for short pocketable stealth rigs that can hit hard. Hell, I'm still using my lowly modified Grippers for just that reason. Here's one in "long" 18500 mode with an Orchid.

PA041665 edit.jpg
 
GrayMatter

GrayMatter

Member For 4 Years
I had been carrying my 4nine almost exclusively but recently picked up an authentic Praxis. It's amazing. Just wish it had options to do 350 and 500 as well. Only a few mm longer than my 4nine clone. Paired here with a Zenith v2 is always with me and a 30ml bottle of juice.

ImageUploadedByTapatalk1418417991.078603.jpg


Delivered by carrier pigeon.
 
Spinhat

Spinhat

Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
forgot to mention I stopped using the copper atty when I saw some green stuff in the top cab, but it did look good while it lasted.
 
Celtic Fog

Celtic Fog

Tir Na Nog
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
the green stuff is just patina, you can wipe it off if you want, its ok still.
 
GrayMatter

GrayMatter

Member For 4 Years
Spinhat said:
forgot to mention I stopped using the copper atty when I saw some green stuff in the top cab, but it did look good while it lasted.
Click to expand...

Put the copper in a cup of vinegar with a tablespoon of salt. Just don't breathe the fumes! If you want to see what it does before you put your RDA in there, take the dirtiest penny you can find and try it. It will remove all the oxidation from the copper. Swirl it every few minutes.


Delivered by carrier pigeon.
 
TheWestPole

TheWestPole

Gold Contributor
Member For 4 Years
I'm not a fan of tube mods in general, but have to say this brass SMPL is the nicest I have ever had. Seamless simplicity, really smart design, so easy to adjust to the battery and atty contact, rattle free, perfect button, and the shortest 18650 out there. Totally minimal style is not for everybody, but a standout for me. Makes my second favorite GP Paps seem kinda busy and dumb, handsome though it is.

PC142091 edit.jpg PC142094 edit.jpg
 
T

Taver13

Guest
franciscan said:
Catsup is great for cleaning copper....I am quite serious


Sent from my iPhone 6 using Tapatalk
Click to expand...
it is! i have used it. most times i dremel with a soft wire wheel, then buff with the dremel with a buff wheel and some marine cleaner wax. for some reason now i have been wanting to let my copper age. i actually am waiting for the clearcoat to dry on my first attempt at forced patina. did it on the 18500 tube of one of my akumas. ill post the pics in the asthetics section when its ready
 
T

Taver13

Guest
TheWestPole said:
I'm not a fan of tube mods in general, but have to say this brass SMPL is the nicest I have ever had. Seamless simplicity, really smart design, so easy to adjust to the battery and atty contact, rattle free, perfect button, and the shortest 18650 out there. Totally minimal style is not for everybody, but a standout for me. Makes my second favorite GP Paps seem kinda busy and dumb, handsome though it is.

View attachment 10445 View attachment 10446
Click to expand...
ditto, i absolutly love my smpl. it is my favorite mod and most used right now
 
G

Gecko

Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
It vapes awesome. Dual .8 ohm Clapton coil right now.
 
Last edited:
You must log in or register to reply here.

VU Sponsors

Top