Hi there
Wondered if anyone out there with a Joyetech eVic Primo mod that could help with a test please.
I've noticed that recently mine has started getting very warm to the touch during use, drains the x2 Samsung 18650 batteries very quickly (including draining overnight whilst not in use).
You can see the internal temperature of the board by doing 5 rapid buttons click to turn off, followed by 10 clicks to switch back on again. I'm finding internal temperatures of 43-50C after 10 minutes of moderate use (TC mode 230C / 48W, on SS316 0.7ohm setup), which seems on the high side. .
Was wondering what sort of internal temperatures other people were getting on this mod?
Cheers
SMG
Wondered if anyone out there with a Joyetech eVic Primo mod that could help with a test please.
I've noticed that recently mine has started getting very warm to the touch during use, drains the x2 Samsung 18650 batteries very quickly (including draining overnight whilst not in use).
You can see the internal temperature of the board by doing 5 rapid buttons click to turn off, followed by 10 clicks to switch back on again. I'm finding internal temperatures of 43-50C after 10 minutes of moderate use (TC mode 230C / 48W, on SS316 0.7ohm setup), which seems on the high side. .
Was wondering what sort of internal temperatures other people were getting on this mod?
Cheers
SMG