I sent you a PM with some (hopefully helpful) instructions. Once you figure it out, it's pretty straight forward. Be forewarned that you will likely have to do this every time you change your batteries!
Become a Patron!
New custom firmware for the RX200S!!!!!!! (and RX2/3 now)
- Thread starter OneBadWolf
- Start date
To date I've been wholly unsuccessful trying to do this fast enough to keep the time, and that's with a one battery mod. I doubt I'll ever get it done that quickly on my RX200S with 3 batteries!
Under the ArticFox configurator, you should be able to goto the [General] tab and [Screen] -- then remove the checkmark for "Show Clock"
If you use ArcticFox from http://vapingunderground.com/thread...any-devices-arcticfox-nfirmwareeditor.303212/
...
You could use «light sleep» «LSL» for better clock, but a little worse battery life. Also, if you change your batteries, your device's clock will reset.
NFE team is moving from GitHub to there own forum here's the link
https://nfeteam.org/forum/
Everything is in one place and better organized.
https://nfeteam.org/forum/
Everything is in one place and better organized.
Define jumping around?
What kind of atty is it?
What kind of coil is it?
If you are running SS (Stainless Steel) wire, then it is possible for the Ω reading to adjust as the coil(s) get hotter.
Example: If I have a dual coil setup of SS316L, cold registers at .25Ω and I vape on it at 60W (power mode, not TC mode), the Ω will now display .30Ω > .40Ω. However, when it cools back down to room temperature, it will read .25Ω again.
However, if your saying jumping around with a KA1 (Kanthal) coil ... if the Ω is sitting at .25Ω and it "jumps" +/- .01-.02Ω constantly, this could be a bad connection between the atty and the 510pin in the MOD, and there are many contacts that you should check between those two final points.
That's normal. It's reading the live wattage it does the same thing in temp mode as the temp changes.
You'll notice that in watt mode it will read the preheat watts then drop to the set watts.
Last edited:
This drove me nuts until I figured it out one night, like Angrygod said it is reading live resistance. I think I spent a hour on my build that night. HA
So, just decided to try this out. (Yeah, I'm a bit behind the times) Works fine on the RX200S all except I can't get it to set the time. I go into the clock menu, set the time, long press fire to save, but it never sets the new time. If anyone is still alive on this post, could you help me out?
What version? And BTW, welcome to VU! Arctic Fox is the hot stuff now, you should give it a try. It automagically sets your clock to you puter when you connect it.
One the road right now, I'll check when I get home, but it's the eVic one that was at the top. Also, since I couldn't get the clock set, I was going to disable it, and just use a 3D or something, and the clock magically started working. Lolz. It was showing 4am, instead of 00.00.00, so I went to set it and it worked. I'll have to check out ArcticFox, is there a link in this thread, or just search for it. I love the preheat settings on this one though. Haven't messed with Alog, cuz not sure what it is, was going to research that later. Maybe I won't have to with ArcticFox. LoL.
Sent from my Pixel 2 XL using Tapatalk
So, just got home, checked out Arctic Fox, installed it, so far I love it. Still gotta play with some of the settings though. Thanks for the info. Here's my setup, using Arctic Fox firmware. RX200S, tank on it atm is just a baby prince, sans fish bowl tank, because, well, I'm a clutz. LoL
Sent from my Pixel 2 XL using Tapatalk
Sent from my Pixel 2 XL using Tapatalk
I wish they could of done something for the 200... I have two of them. I also have a black 200S. I might have to give this a shot. IMO it seems to me that the 200 model hits harder than the S version. I hardly use my 200S.
Sent from my Nexus 5 using Tapatalk
Sent from my Nexus 5 using Tapatalk
No, I bought an all black faceplate and battery cover for the 200S. I think it came with black and blue? It's all black now though.
Sent from my Nexus 5 using Tapatalk