Vapin with a Dripbox 160 25 gs SS316L coils working out to .28 at 380 deg. A very nice and pretty dense vape.
Become a Patron!
Squonkers are Bonkers
- Thread starter DogMan
- Start date
So, maybe I should build lower for the DB 160? I have dual coils at 0.58 ohms and the thing gets weird with that. Sometimes fires fine, other times it switches to power mode.
Maybe so. I think the highest I have gone on a coil in there was maybe .45?
.2 - .3 seems to work fine.
Of course the temp may be off compared to other mods but the majority of mods are that way.
It should be stable.
Note I have only used round wire builds.
Not into gargoyle hoof skeletor coils.
7 volts output.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Unless I hear something very shitty about it, this will be a must have for me, lol
I'll wait for the JL seal of approval
Sent from my iPhone using Tapatalk
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Here are a couple of pics. Behold,the new chalice
Sent from my LGMS550 using Tapatalk
Holy cow - a wood box, not your usual Mark Bugs tin
With cork lining, maybe it could be made into a small squonk mod?
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Was going to get another Odis 16, but might hold out for this instead
I don't blame you, I'll keep an eye on them too, but I'll wait for your opinion. I'm happy with the Chalice 2 and 3 for now, besides, I've been using the Nuppin lately.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
I like it so much, I bought a v1 and another v2 for a backup.
Heck! I might be able to afford the empty box.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
I'm sure you will want to wait for the version that comes in a hollowed out giant plastic screw
They have those in fleshtones at FT.I'm sure you will want to wait for the version that comes in a hollowed out giant plastic screw
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Pretty much.Mine are too...if you are a pasty looking white guy
they miscalculated shipping, wanted an extra $1.39
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Sheesh - you almost bankrupted FastTech with that one
ROFL
Im finally picking up a nw sqounker...I really wanted a Brass Copper vape but I couldnt afford one at the moment...but I did grab a Boxer Clone...Im hoping this will be the first of many squonkers to come but Im hoping to find a Dual Parallel Squonker next...maybe Ill convert my Lethal or Tres Equis Boxes...they'd be the perfect boxes for it.
Did CopperVape make a Copper BF Mod at one point? If Not I kinda wish they did...
Did CopperVape make a Copper BF Mod at one point? If Not I kinda wish they did...
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
You would THINK that "Coppervape" would have made, well a "copper vape".
But not that I've ever heard or seen...
But not that I've ever heard or seen...
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
You would THINK that "Coppervape" would have made, well a "copper vape".
But not that I've ever heard or seen...
When Dre was having them special made (pre-FastTech era) he agitated for brass and copper ones.
They said no dice for COPPER, but thanks to Dre, we do have the brass
Love those brass jobbers, heavy but dam, what a squonker
You could always ask @Sonar505 for a custom one, not very much more than a brass CV I think. @minimalsaint would also be a good one to talk to.
But before that, I damn glad to see you here, you'll love the bonkers around this joint. I may be wrong, but I think @Mikhail Naumov was working on a box for @inspects , possibly a squonk box!
That's how I'd do it Dansomeone was after a way to put a corner squonk on a berkshire box
That happened to me once before too, they reckon it's because the website calculates postage one way but in RL it's calculated another way (one being by weight, the other by volume) ... what do you do but pay it
Mikhail Naumov
VU Donator
Gold Contributor
Member For 3 Years
Member For 2 Years
ECF Refugee
Unlisted Vendor
Not a squonk, 4S LiPo Ant iPWM N1 mod. Though I will absolutely make squonk.. anything, really.
They said they'd send it epacket instead for what I paid. So I took that option after their PayPal link disagreed with my phone browserThat happened to me once before too, they reckon it's because the website calculates postage one way but in RL it's calculated another way (one being by weight, the other by volume) ... what do you do but pay it
Sent from my LG-H815 using Tapatalk
Made.My.Night.
New today Molly, featuring a Shingen - from Hank's collection.
Always thought it looked good, but I don't BF stuff myself. Hank did a perfect job on this.
Yeah, it's a bit "old" (came out well over a year ago) and it's air from above - but damnit, I friggin LIKE IT.
Nice vape, looks cool.
New today Molly, featuring a Shingen - from Hank's collection.
Always thought it looked good, but I don't BF stuff myself. Hank did a perfect job on this.
Yeah, it's a bit "old" (came out well over a year ago) and it's air from above - but damnit, I friggin LIKE IT.
Nice vape, looks cool.
Well, there's that too
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
Riding the popularity wave
A shame China's stuck in cloning mode. They could very easily come up with a tasteful, quality, original mech polycarbonate squonker in a rainbow of colors with interchangeable doors and buttons for cheap and then turn around and sell them for $30-$40 and they'll sell like hotcakes.
Sent from my iPhone using Tapatalk Pro
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
They could, but look at how long it took for them to do an authentic mech tube that worse a damn
BAM crew
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Todd is channeling his inner elitist 12-year old
Vaping Fashion.....
Very much like other fashion industries.
Very much like other fashion industries.
I want a BIG 3D printer so I can print a car!
You mean like this one?
Naah, that one is kinda ugly.
