Become a Patron!

Pharaoh RTA by DigiFlavor (a RIP Trippers Project)

theclaw20

Bronze Contributor
Member For 3 Years
Actually, I think I'm gonna try my hand at building Dual Fused Clapton wire with my 20 gauge wire instead.

Sent from my Moto G (5) Plus using Tapatalk
 

theclaw20

Bronze Contributor
Member For 3 Years
Nah I want the change to the heat flux clapton would provide. Clapton it is

Sent from my Moto G (5) Plus using Tapatalk
 

theclaw20

Bronze Contributor
Member For 3 Years
Just ordered some 30g kanthal. Gonna make fused claptons 20/20/30 and put a single coil in the Pharaoh. Should be sick!

Sent from my Moto G (5) Plus using Tapatalk
 

theclaw20

Bronze Contributor
Member For 3 Years
Gonna try a parallel 22g k single coil tomorrow while I wait for my new wire

Sent from my Moto G (5) Plus using Tapatalk
 

theclaw20

Bronze Contributor
Member For 3 Years
The top of my Pharaoh gets way too hot. I took the 510 adapter from my TFV12 that has a ring around the bottom and plugged it in and put a bunch of orings underneath it to keep the top from getting so hot. Seems to be working fairly well.
fe9ac272184016b6d26e3944a7b46929.jpg


Sent from my Moto G (5) Plus using Tapatalk
 

joeyboy

Gold Contributor
Member For 5 Years
Built my second pharoah today and found a qc issue. The 510 threads are short by at least 2 threads. It cannot be used on my battlestar mod as it cannot screw on but can on the charon and some older mods without issue.
 

theclaw20

Bronze Contributor
Member For 3 Years
Built my second pharoah today and found a qc issue. The 510 threads are short by at least 2 threads. It cannot be used on my battlestar mod as it cannot screw on but can on the charon and some older mods without issue.
Yea its a tad short

Sent from my Moto G (5) Plus using Tapatalk
 

Waffle Baron

Bronze Contributor
Member For 3 Years
Built my second pharoah today and found a qc issue. The 510 threads are short by at least 2 threads. It cannot be used on my battlestar mod as it cannot screw on but can on the charon and some older mods without issue.
I have this same problem on my Cleito Exo and it does't work on my G2. I have the Pharaoh RTA showing up on Thursday and I really hope it works as I bought it specifically because of the Cleito's problem.
 

joeyboy

Gold Contributor
Member For 5 Years
I have this same problem on my Cleito Exo and it does't work on my G2. I have the Pharaoh RTA showing up on Thursday and I really hope it works as I bought it specifically because of the Cleito's problem.
I don't have issues, I think, on a slice. It's more the design of the 510 on the battlestar. The charon seems to be different and it works on that. My old old sig 50 watt watt no issues so I suspect my d2 would be okay also.
 

Waffle Baron

Bronze Contributor
Member For 3 Years
LOL so my Pharaoh came in today and it was missing both clamps and screws <forehead> So off to customer support I go
 

SirRichardRear

AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
I don't have issues, I think, on a slice. It's more the design of the 510 on the battlestar. The charon seems to be different and it works on that. My old old sig 50 watt watt no issues so I suspect my d2 would be okay also.
Just tried mine on the battlestar. No issues and working great in TC mode as well

My 1st pharaoh was defective and leaky as hell. My new one no issues. I think it's a qc issue with some of the pharaohs
1ceddaa024e245f389a5f1a8bcce415d.jpg


Sent from my SM-G935V using Tapatalk
 

joeyboy

Gold Contributor
Member For 5 Years
Just tried mine on the battlestar. No issues and working great in TC mode as well

My 1st pharaoh was defective and leaky as hell. My new one no issues. I think it's a qc issue with some of the pharaohs
1ceddaa024e245f389a5f1a8bcce415d.jpg


Sent from my SM-G935V using Tapatalk
They are sending me another base.
 

VU Sponsors

Top