Become a Patron!

(List full)Billet box rev4

onitsuj

Member For 4 Years
Rating - 0%
0   0   0
Here is a link to a prototype of some stabwood doors made by sxk for the billet box clone (once again I don't understand a word but it's cool to see sxk is making accessories for it!)

 

dre

Platinum Contributor
ECF Refugee
Member For 5 Years
Rating - 100%
64   0   0
Update email**

Good evening.


Sorry I thought the stabwood panels of the video is just a sample and I have seen my boss using it. At present we haven't start the mass production and not ready to sell it. So I couldn't send you one free sample.


The stabwood is a special wood and it's difficult to produce it. Also this type material is expensive. So the stabwood panels will be expensive. That's the reason why we didn't start to produce and sell it. We are planning to use resin material to make panels which is cheap than stabwood. Will let you know when we ready to sell it.


We will ship the goods in today's evening. And the tracking No. will be offered tomorrow. Will let you know when we got the tracking NO. Don't worry.


Kindly regards,




Sent from my XT1585 using Tapatalk
 

dre

Platinum Contributor
ECF Refugee
Member For 5 Years
Rating - 100%
64   0   0
Tried to get one for the trouble

Sent from my XT1585 using Tapatalk
 

onitsuj

Member For 4 Years
Rating - 0%
0   0   0
Good effort @dre ! I'm clearly down the billet faux rabbit hole. Can't believe I found these two videos. I can't wait for them to ship. I've also seen the Exocet clone listed on a Korean vape site which hopefully means it will be available other places soon.
 

dre

Platinum Contributor
ECF Refugee
Member For 5 Years
Rating - 100%
64   0   0
Good effort @dre ! I'm clearly down the billet faux rabbit hole. Can't believe I found these two videos. I can't wait for them to ship. I've also seen the Exocet clone listed on a Korean vape site which hopefully means it will be available other places soon.
It's not from sxk. They haven't produced any yet. It might just be a picture for a preorder

Sent from my XT1585 using Tapatalk
 

dre

Platinum Contributor
ECF Refugee
Member For 5 Years
Rating - 100%
64   0   0
The stab wood panels isn't from sxk. They're not making any since it's too expensive. They'll be making some from resin only.

Sent from my XT1585 using Tapatalk
 

dre

Platinum Contributor
ECF Refugee
Member For 5 Years
Rating - 100%
64   0   0
Anyone else excited that our boxes shipped!!?? I'll have them in 2-3 days. I will send it to everyone the same day if it gets to me at least a few hours before post office closes. I sold all my high end vape gear so I'm looking forward to this clone.

P.s. I'm a little passed 3/4 of the amount for my dogs surgery

Sent from my XT1585 using Tapatalk
 

dre

Platinum Contributor
ECF Refugee
Member For 5 Years
Rating - 100%
64   0   0
SOOOOOOO Happy you are nearing the amount to get your sweetie better too, Dre <3<3<3<3:hug:
Me too. A couple members have helped which I totally appreciate. The mods I sold are replaceable but my Missy isn't. Hopefully after my next few paydays I'll be able to get her the surgery.

Sent from my XT1585 using Tapatalk
 

Whiskey

Diamond Contributor
Member For 4 Years
Rating - 100%
28   0   0
clap_zpscnmvvuiq.gif
 

dre

Platinum Contributor
ECF Refugee
Member For 5 Years
Rating - 100%
64   0   0
I think I'll do the Exocet run if it's not going to be available on fasttech or focal within a few weeks. I'll find out soon for everyone. Like a week tops.

Sent from my XT1585 using Tapatalk
 

forza

Gold Contributor
Member For 4 Years
Rating - 100%
28   0   0
Woo hoo!! I'm all excited about it now!

Sent from my SAMSUNG-SM-G935A using Tapatalk
 

dre

Platinum Contributor
ECF Refugee
Member For 5 Years
Rating - 100%
64   0   0
I got us two day DHL Express. Those mods better be in my hands Saturday. I hope DHL does Saturday delivery.

Sent from my XT1585 using Tapatalk
 

crazydmnd

Gold Contributor
Member For 5 Years
Rating - 100%
64   0   0
I think I'll do the Exocet run if it's not going to be available on fasttech or focal within a few weeks. I'll find out soon for everyone. Like a week tops.

Sent from my XT1585 using Tapatalk
Does anyone know if the exocet is better than steam tuners insider?

Sent from my SM-G935V using Tapatalk
 

crazydmnd

Gold Contributor
Member For 5 Years
Rating - 100%
64   0   0
Anyone else excited that our boxes shipped!!?? I'll have them in 2-3 days. I will send it to everyone the same day if it gets to me at least a few hours before post office closes. I sold all my high end vape gear so I'm looking forward to this clone.

P.s. I'm a little passed 3/4 of the amount for my dogs surgery

Sent from my XT1585 using Tapatalk
Super stoked for this and Missy's almost to the surgery goal!

Sent from my SM-G935V using Tapatalk
 

dre

Platinum Contributor
ECF Refugee
Member For 5 Years
Rating - 100%
64   0   0
Same here, what were those coils again?
Aspire mini bvc 1.8 or for more airflow aspire triton mini 1.8 Clapton coils (these last longer but more of a restricted lung hit)

Sent from my XT1585 using Tapatalk
 

dre

Platinum Contributor
ECF Refugee
Member For 5 Years
Rating - 100%
64   0   0
I picked up an Atlantis RBA that is supposed to fit as well. I'll report back when I get it.
You need the hot tank for Atlantis style coils. It's a bit with a bigger bottom hole. The tank included with the mod only fits Kanger and Nautilus coils or Triton mini.

Sent from my XT1585 using Tapatalk
 

onitsuj

Member For 4 Years
Rating - 0%
0   0   0
You need the hot tank for Atlantis style coils. It's a bit with a bigger bottom hole. The tank included with the mod only fits Kanger and Nautilus coils or Triton mini.

Sent from my XT1585 using Tapatalk

Darn I got the wrong one! I was thinking of getting a hot tank or an A tank but was hoping to see if I could get a workaround first as they are pricey!
 

dre

Platinum Contributor
ECF Refugee
Member For 5 Years
Rating - 100%
64   0   0
Darn I got the wrong one! I was thinking of getting a hot tank or an A tank but was hoping to see if I could get a workaround first as they are pricey!
You would have to drill the hole bigger and make a channel for the o ring. Sxk will be releasing boro tanks for like $4 soon. Just keep a eye out

Sent from my XT1585 using Tapatalk
 

Le Furet

VU Donator
Silver Contributor
Member For 3 Years
Member For 2 Years
Rating - 100%
14   0   0
Hey folks, just fyi I've still been keeping tabs on the progress of this group buy, so super cool how it's coming together, you are the mack @dre !! Lots of time and love going into this. I'm excited for you all and looking forward to pics.
Congratulations everyone...
Go the purple unicorn poo !!
 

dre

Platinum Contributor
ECF Refugee
Member For 5 Years
Rating - 100%
64   0   0
Shipping labels are all made up! Only issue is I have 7 padded envelopes(had 50 didn't realize I shipped that much stuff). So 4 have to go in small flat rate boxes. If for some reason they don't fit those 4 might be delayed till he next morning.

Sent from my XT1585 using Tapatalk
 

dre

Platinum Contributor
ECF Refugee
Member For 5 Years
Rating - 100%
64   0   0
Unless someone knows where I can get the flat rate padded envelopes on a Sunday?

Sent from my XT1585 using Tapatalk
 

Whiskey

Diamond Contributor
Member For 4 Years
Rating - 100%
28   0   0
Not sure....some PO's carry supplies in the lobby and some Po's lobbies are not open on Sunday's....I am sure folks are not gonna haggle you on a day's difference Dre
 

dre

Platinum Contributor
ECF Refugee
Member For 5 Years
Rating - 100%
64   0   0
The bbox is small so I'm sure it will fit inside the small boxes

Sent from my XT1585 using Tapatalk
 

forza

Gold Contributor
Member For 4 Years
Rating - 100%
28   0   0
Well should it not, I don't mind waiting another day or two. So you can add me to that list.

Sent from my SAMSUNG-SM-G935A using Tapatalk
 

dre

Platinum Contributor
ECF Refugee
Member For 5 Years
Rating - 100%
64   0   0
Well should it not, I don't mind waiting another day or two. So you can add me to that list.

Sent from my SAMSUNG-SM-G935A using Tapatalk
From the pictures it looks like I shouldn't have a problem. Just wanted to give a heads up.

Sent from my XT1585 using Tapatalk
 

VU Sponsors

Top