F
fckaugust8th
Guest
Roxy and Kad, stop that! It is not pleasant snorting hot coffee! Besides, will it not be painful to give it a turn if it's stiff? 
Become a Patron!
The Merlin RTA by Augvape and Roxy
- Thread starter roxynoodle
- Start date
roxynoodle
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
Roxy and Kad, stop that! It is not pleasant snorting hot coffee! Besides, will it not be painful to give it a turn if it's stiff?
I can think of people I'd love to do that to
F
fckaugust8th
Guest
One the serious side, sort of, the Merlin fits on the iStick Pico....just barely, but it does.
Last edited by a moderator:
F
fckaugust8th
Guest
Ouchhhh!
roxynoodle
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
No, I did 3mm duals. Not sure you could get much bigger without hitting the top of the chimney chamber.
I think you need a Boreas
F
fckaugust8th
Guest
Hey Huck, I think @Shark Vape might like the Merlin.
No, I did 3mm duals. Not sure you could get much bigger without hitting the top of the chimney chamber.
I think you need a Boreas
just curious Ive tried 3mm dual 26ga and it worked
Considering how I feel about my v1 Mini and how much I'm enjoying the Merlin... I bet you're right!
F
fckaugust8th
Guest
@Shark Vape ,where are you???? We may have sonsing to replace your treasured gob. mini!
roxynoodle
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
I'm still using both
I have one ADV in Merlin and the other ADV in my mini.
@roxynoodle, I like your tank 
roxynoodle
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
roxynoodle
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
Has anyone put a review up for Subtank Supply?
I did, in vendor reviews
roxynoodle
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
I mean on his website. It would help him and Augvape.
Ok
Sent from my SM-T237P using Tapatalk
Sent from my SM-T237P using Tapatalk
Ohhh duh!
sorry, forgive my numbness LOL
roxynoodle
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
Heck, give him reviews for anything he sells that you own. I'm going to to help him out.
F
fckaugust8th
Guest
Yepeee!! I posted the first review for the Merlin on the STS website. Finally, I beat Huck 
roxynoodle
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
Maybe it will cheer him up. People read them when they are debating buying something. I do.
roxynoodle
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
Obviously I can't do Boreas or Merlin, but I see about 10 things I can do one for, so that will be my morning project with my coffee.
F
fckaugust8th
Guest
I put the Merlin on one of the Mini Volts! It's kinda like the tail wagging the dog, but it works!
Did you though? You many not recognize me there.Yepeee!! I posted the first review for the Merlin on the STS website. Finally, I beat Huck
Oh you brat!! You did beat me this time. THIS time.
I used a gaming acct name, so no one knows that one. Well, except for now. Now they do. But, you already knew my name.
Laughed out loud, I did!
I put one up but I wasn't creative and I put a review for Merlin on the Merlin product page...
Sent from my SM-T237P using Tapatalk
Sent from my SM-T237P using Tapatalk
just a thought ...don't ask me why ! check that all 4 grub screws are all the way in .
roxynoodle
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
It's a review, not a poem
It's worth looking at, but that probably would prevent putting the deck in the chimney?
I've been using it today with one of my adv. It's the one I normally have in my GMv2. I'm really liking Merlin. No leaks at all since I got my wicking right (2nd try and realize it was missing an o-ring). For a full on test, I'll have to try it out with my other adv, which is in my GM v1.
roxynoodle
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
@Brewbear, Ms. Huck... strictly on a flavor density scale... really?
@roxynoodle, have you used a Goblin Mini v1?
I only ask because I still haven't found anything... anything that compares favorably there to the the GM-v1 for MTL.
(yes, that def includes the v2)
Believe me, I'd love something easier.
What I really need is a self rebuilding RTA.
I feel exactly the same way......
...and I've had my grub screws all the way in fer years.
I had a GM v1. I traded it
It's a good flavor atty, but that fill screw pissed me off. Merlin has excellent flavor, and is much easier to build and fill.Oh, and that GM used to cut my fingers whenever I took it apart.
BulletStopper
Member For 4 Years
I need to find a new drip tip, decided I needed to do something about the gap I have with my current collection.
Does anyone have any recommendations, since I found it a slightly smaller hole and it is not as deep as some atties.
I'm a MTL vaper and did not care for the stock drip tip.
Thanks.
Does anyone have any recommendations, since I found it a slightly smaller hole and it is not as deep as some atties.
I'm a MTL vaper and did not care for the stock drip tip.
Thanks.
roxynoodle
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
Have you tried maybe lubing up your o rings on your drip tip to see if it will go in all the way?
BulletStopper
Member For 4 Years
It's fully seated, looked through the bottom to verify but still leaves a 1 mm gap.
With sand a bit off tonight, when I get home.
Sent from my Nexus 6 using Tapatalk
roxynoodle
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
I have some clone VA drip tips like this from FT in SS and black, and they fit the Crius, which has a super tight dt opening. They aren't showing up in a search though. Just these other colors:
https://www.fasttech.com/products/3016/10010848/1926602
https://www.fasttech.com/products/3016/10010848/1926602
roxynoodle
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
Here ya go:
Do ebay links not work?
Well, search "VA drip tip" on ebay. They come in silver/black and gold/black.
Do ebay links not work?
Well, search "VA drip tip" on ebay. They come in silver/black and gold/black.
F
fckaugust8th
Guest
Morning Boden
F
fckaugust8th
Guest
I'm having a problem with eBay links also, they want to be movies. ...
roxynoodle
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
Apparently.
F
fckaugust8th
Guest
LOL Boden, I was looking at jewelers lathes, then remembered that I have a mini lathe new, in box. If I could find the box.....
roxynoodle
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
roxynoodle
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
I just keep posting dirty shit
dwcraig1
Member For 4 Years
I'll get back to this in a moment...LOL
So what I did was to make dual twisted 2 mm SS 430 coils, it worked great on my DNA200 when I set it up but at 0.2Ω it was a bit too low for the Dicodes at 37 watts. It was flashing "Low Battery" due to the voltage drop. Still fired OK but it annoyed me so....
Edit: In the end I put the same coil that I had in it before any of the above....works just great.
Last edited:
