thewanderernick
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Sounds like you had a good weekend. Right back to the grind again now.
OMG, my hubby and I are addicted to Game of Thrones! It's so well done. Another one that started last year that is similar and so well done also is Outlander. And Vikings...that is awesome too. So well acted, and they follow the history well. . Also love Grey's Anatomy, The Walking Dead, and Defiance. Too many good shows, can't keep up with them all.What's everyone's favorite shows?
As I said earlier I'm currently binge watching Game of Thrones on HBO Go. Read all the books so I figured why not. It's awaomesauce.
All time favorite would be The X Files. Also a huge BsG fan.
Just taking it off topic for a bit
Dude i have so many good shows I can't believe I left that out. Its perfect timing now too since you can binge watch a whole season. I loved it, and was pleasantly surprised to see Christian Slater there.If no one saw any of the Mr. Robot series that was on USA network I thought it was a good series. the x-files was the shizzle.
Lol...it's usually the campfire smoke smell. I feel you, first thing I do when I get home from camping is shower. Well, actually second. Always have to put everything away first. Glad you had a good time!
Thanks man, I use stock coils, cleaned everything, lifted that pin slightly, and still nothing, :/First thing, make sure you aren't over tightening your atomizer. You can crush the pin and it will read atomizer short. Try it again without tightening too much. Finger tight is almost too much.
Secondly, if the atomizer is an RBa, do you have all your screws tight enough on that rba deck? If it's a plug in coil, is it twisted in far enough? What atomizer are you using?
The other thing I would check is the cleanliness of the pin itself. Turn it off, and take a dry Q Tip and wipe it around the pin area. After you've done that, you can gently pull on the pin, upward, with a small flat head. And I do mean gently when you do this. If you crushed the pin, you can pull it back up again, but if you pull too hard or too much, you'll do more damage to it than good. And again, turn it off first...you don't want to hard short your device by sticking something metal in it while it's turned on.
Let us know, okay? I'm headed to bed but I'll check in on the status in the AM.
It's the 30w, and I'm using smok vct on it.Which iStick? The 20 (original) and 10 (mini) did not have spring loaded center pins. As such, longer 510 connectors (my Kanger Subtank Mini was my bad boy) will force the center pin down and eventually dislodge the insulator (an o-ring). Use a q-tip to clean the connector, then, look inside the 510 on the mod and check to see if the insulator is still in place. If it's there, but malformed, use a small screwdriver or set of tweezers to gently lift the pin and set the insulator back in place. If it's damaged or missing, put the smallest o-ring you can find on the tips of a pair of tweezers and simultaneously lift the pin while rolling the o-ring off of the tweezers and around to under the pin.
My iStick 20 did the exact same thing, and a little non-invasive surgery was all it took to get it operational.
Do turn off the mod while working on it to prevent further damage by accidentally firing the mod when you have tweezers or a screwdriver stuck in the 510.
Let us know how it turns out.
Just tried the o ring, still just saying atomizer short and protection :/It's the 30w, and I'm using smok vct on it.
do you mean wedge an o ring underneath that little copper looking pin where I screw in the tank into? I haven't tried that yet...
The 30 watt has a spring loaded 510. Try pushing the pin down and seeing if it pops back up. Also, clean well with a q-tip to make sure there are no metal shavings in there.It's the 30w, and I'm using smok vct on it.
do you mean wedge an o ring underneath that little copper looking pin where I screw in the tank into? I haven't tried that yet...
Mommaaa i see youBbbbbooooonnnnndddddoooo!!!!! I see you
Sent from my iPhone using Tapatalk
Lmao, stalk much??Bbbbbooooonnnnndddddoooo!!!!! I see you
Sent from my iPhone using Tapatalk
Gotta catch you when I you lmbo. How have you been my friend?Lmao, stalk much??
Busy but good. How are you?Gotta catch you when I you lmbo. How have you been my friend?
Sent from my iPhone using Tapatalk
No shavings, and it pushed back up just fine. :/The 30 watt has a spring loaded 510. Try pushing the pin down and seeing if it pops back up. Also, clean well with a q-tip to make sure there are no metal shavings in there.
I LOVE IT!!!!!!! My awesome son built me a TC coil too!!! I'm just overwhelmed at the difference of a good cv/vw box vs a starter box, just like when I went from ego to mech mods, just wow!!! The TC I'm still playing with but the device Is A #1.Busy but good. How are you?
How's the new siggy treating ya? I got one a couple weeks ago but I havn't had a chance to play with it much.
Thanks man, I use stock coils, cleaned everything, lifted that pin slightly, and still nothing, :/
I LOVE IT!!!!!!! My awesome son built me a TC coil too!!! I'm just overwhelmed at the difference of a good cv/vw box vs a starter box, just like when I went from ego to mech mods, just wow!!! The TC I'm still playing with but the device Is A #1.
Sent from my iPhone using Tapatalk
I knwww lol ive been waiting for a week & a half.. im going crazy already.. I hear nothing but great things bout that tankyou got a beast of a tank waiting on you .
No, just the smok , well I guess I could try me evod with the adapter to? And ya I've tried the different coils no luck there either :/Do you have another atomizer you can try? And have you tried changing the coil?
WOOHOOO FREEEEEEEEEEEEEEEEDOMCan tell my kids are at school and I have nothing to do for the first time in a long time lol
Sent from my iPhone using Tapatalk
The coils that last a month are almost 40$ for 5 that's just a downside and they go threw a ton of juice because the coils are so bigOk been reading and watching reviews on the new SMOK tank and i think that will be my first tank. I was going to do the goblin, but this tank seems to have it all. And apparently a coil head can last a full month. This sucker will be nice. Love the top fill system and the capacity. It is a huge looking tank though, but I guess it needs to be to have 4 coils.
I bought them to clean straws, cake tips, drip tips etc. You can get them in the baby aisle at meijer's or I got some real cheap under airbrush supplies because I also have a set of assorted sizes and lengths to clean my airbrush k
Anyone who had recently had kids and have things like this laying around unused they are great for cleaning out drip tips and tank I saw something like it on a vaping website and because they put vaping in front of it it cost 10times what it would have. Also what is good to use that you can get at any beauty supply store is disposable mascara applicators
Sent from my iPhone using Tapatalk
Sorry for the intrusion but manstink can be extremely sexy in the right circumstance! I don't think there is anything hotter than a hard working man! I would add a little more to that but it might be a little inappropriate!manstink lol
It's kinda on the same lines of the asolo it is very different and it's hard to understand unless you have used it the one downfall to that mod is the self locking system I hate itHas anyone had any experience with using kanthal for temp control my artic dolphin does it but I wouldn't call it a true temp control as in my ipv4s. Yes you can control the temp in both but there are definitely differences
Ps. I know you have to use ni200 in most temp control settings but not for the T-GI 150w
Sent from my iPhone using Tapatalk
So are those the ones you made
This was my first batch of DIY of 20x20ml bottles yay I need a big glass skull for my favorite one!!! Where do you get those bad boys
Sent from my iPhone using Tapatalk
Yes those are the ones I made completely from scratch I made a few 30ml ones but they're pretty much gone.So are those the ones you made
Sent from my SM-N910V using Tapatalk