Become a Patron!

Official Patina Thread - DIY, Guides and Showcase

driver379

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Well I am not quite sure how happy I am with it but it is what it is unless I want to sand it down and start over and I am not that unhappy with it...LOL. I think if i had kept it in there for a full 24 hrs instead of 10 it would have lightened up considerably.
But overall not too bad for my first time trying.



View attachment 1711 View attachment 1710
View attachment 1709
Looks good. I like that you left the end caps copper. Really nice.
 

Celtic Fog

Tir Na Nog
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
The greens really pop on that bad boy, what did you do for the patina, and what did you use to clear it?
 
T

Taver13

Guest
it was actually a long process i did, i used a mix of miracle grow and amonia in a spray bottle, sprayed the bottom of the chamber with that and put some pink himalayan rock salt in the botom. sprayed the mod and lightly salted it. turned every few hours a quater turn, ligh spray and more salt. did this for a few days until it was caked, and let it sit some more. once the whole thing was covered in almost completly with patina, i washed off the salt and let dry. then i took a dremel with a wire wheel and randomly took off spots of patina. back in the chamber it went like that, with nothing in the bottom except pure ammonia and let that sit for a few days, turning occasionally. for clear i did 4 coats of rustoleum crystal clear enamel, then i let sit for 24 hours, wet sand with 600 grit, two more coats, let sit a couple days, then polished with a marine/rv cleaner wax. i cant wait til you see the smpl mod, it came out so sick, just like this but crazier
 

Celtic Fog

Tir Na Nog
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
sweet, I am going to try the MG method next. I have got blues down, but want some greens!
 
T

Taver13

Guest
in person it looks alot darker and deeper, the flash and clearcoat down play well together. im getting away from rda's and going to tanks mostly, cept my plume veil, which i love, so i wanna trade it away. the mod though, i dont think i could ever part with. my 4nine is cookin in the chamber right now. i think im addicted to doing this
 

Zamazam

Evil Vulcan's do it with Logic
VU Donator
Platinum Contributor
Member For 5 Years
sweet, I am going to try the MG method next. I have got blues down, but want some greens!

Go down to your local hydroponics store, or chemical retailer and get some copper chlorate, not chloride. If you want green, you will get it with a 10% solution. DO NOT use ammonia with this type of combo, HS Chemistry...
 

Celtic Fog

Tir Na Nog
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Nice, thanks Zam!
 
T

Taver13

Guest
the miracle grow actually has that as one of the ingredients, thats why i got the greens
 

Celtic Fog

Tir Na Nog
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
just started on a new patina. did a light blue patina on it, now put a thin layer of pearl on it as well. Next it will be headed into clear coat and sanding stage. Ill post some more pics once it gets it first few layers of clear on it.
20150115_111928.jpg
its really has a lot of glare right now due to the green pearl i put on top of the patina, hard to see the pearl on it until i clear coat it.
 
T

Taver13

Guest
just started on a new patina. did a light blue patina on it, now put a thin layer of pearl on it as well. Next it will be headed into clear coat and sanding stage. Ill post some more pics once it gets it first few layers of clear on it.
View attachment 12540
its really has a lot of glare right now due to the green pearl i put on top of the patina, hard to see the pearl on it until i clear coat it.
lookin good so far foggy!
 

Celtic Fog

Tir Na Nog
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Thanks Taver! I decided to drop another layer of Pearl on it, gave it a silver green pearl gloss to it, you can still see the patina and the copper peaking through though. Cant wait to start glassing it now.
 
T

Taver13

Guest
the 4nine im working on now is gonna get the metal flake treatment prior to clear
 
T

Taver13

Guest
and also after the 4th coat to give it some depth befoire the last two coats
 

Celtic Fog

Tir Na Nog
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
What brand of flake do you use? For the Pearls and Flake I only use Testors.
 

Number3124

Silver Contributor
Member For 4 Years
These. Look. Awesome.

Great... Now I have to get a copper FUhattan to go with the copper Tobh I want so I can do this to both of them...

Since when did this cost more than smoking...?
 
T

Taver13

Guest
These. Look. Awesome.

Great... Now I have to get a copper FUhattan to go with the copper Tobh I want so I can do this to both of them...

Since when did this cost more than smoking...?
whole hell of alot healthier
 

Nitrowolf72

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
did this mutation v2, did my smpl mod at the same time, so they look cool together, the smpl i fucked the clear coat, so im in the process of re clearing it
View attachment 12211 View attachment 12212
the mutation is up for trade over in the trading post

Yeah the pics do no justice for the atty. That sumbitch is sick in person and vapes as good as it looks. I've got a 1.4 ohm build in it and she's chucking a decent cloud and great flavor. Thanks for an awesome atty @ Taver13!

Sent from my LGL35G
 
T

Taver13

Guest
Yeah the pics do no justice for the atty. That sumbitch is sick in person and vapes as good as it looks. I've got a 1.4 ohm build in it and she's chucking a decent cloud and great flavor. Thanks for an awesome atty @ Taver13!

Sent from my LGL35G
no problem man, cant wait til you see the turtleship in person
 

Nitrowolf72

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Neither can I. Hopefully we will both get our stuff tomorrow. I know I've got 2 new attys that should be here tomorrow and another later in the week. Lol. All these trades is just making me worse on vape equipment.

Sent from my LGL35G
 
T

Taver13

Guest
Neither can I. Hopefully we will both get our stuff tomorrow. I know I've got 2 new attys that should be here tomorrow and another later in the week. Lol. All these trades is just making me worse on vape equipment.

Sent from my LGL35G
same here my man
 

McPuff

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Here is the hades i just finished
 

Attachments

  • image.jpg
    image.jpg
    590.5 KB · Views: 37

McPuff

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
thanks :). this is one of my favorite mods right now
 

McPuff

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
next is going to be my fm mod clone. gotta stop or get more mods after that. just cause i dont want all of them to be patina.
 
T

Taver13

Guest
next is going to be my fm mod clone. gotta stop or get more mods after that. just cause i dont want all of them to be patina.
i said the same thing, ended up with patina on every brass mod and rda i have...
 

McPuff

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
there we go.... i can start doing rda's to match :D:cool:
 

McPuff

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
if you want them to match you have to do them at the same time[/QUO

oh yeah. maybe i'll do the fm and my big block 454 at the same time. i will start it tomorrow. post pics when its done.
 

ShaggyVapes14

Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Starting my copper Corsair! Updates to come!
13d4577a2da02eee275e1afc0ccb1929.jpg



Why eat Scooby Snacks, when you can vape them!
 

dingo1799

Bronze Contributor
Member For 4 Years
1EE5AD8D-52AE-49AE-B471-6863643032BF.jpg
Just picked up a barely used authentic Ragnarok....tempted to patina the shit out of it! I will say, people aren't lying when they say rags hit like a Mack truck. Holy lungs full of Vapey goodness!!!
 
Last edited:

dingo1799

Bronze Contributor
Member For 4 Years
21D78BA1-E48E-4E97-BDAD-3F2DD9A7D439.jpg


Picked up a copper gem, and brass nemesis yesterday, used to play with. This is the gem, I like the color. It started out looking almost cheetah spotted this color blue with copper still showing through, I almost took it out then. Then a little farther along the spots turned to streaks like a zebra. Wondering what it'd look like if I put it back in another 8 hours. I'd say not bad for first time!
 
T

Taver13

Guest
21D78BA1-E48E-4E97-BDAD-3F2DD9A7D439.jpg


Picked up a copper gem, and brass nemesis yesterday, used to play with. This is the gem, I like the color. It started out looking almost cheetah spotted this color blue with copper still showing through, I almost took it out then. Then a little farther along the spots turned to streaks like a zebra. Wondering what it'd look like if I put it back in another 8 hours. I'd say not bad for first time!
put a couple dabs of mustard spotted all over then throw it back in the chamber with just ammonia, it will look awesome
 

Tornadoalleydeb

Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Here is the one I just did. I used sea salt and ammonia.

 

Tornadoalleydeb

Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
IKR! I got the atty from this really awesome guy I know. I had done a patina on this one before and I am sort of sorry I took it off as it was way cool. looked like an old world map. Need to see if I can find a picture of it
 
T

Taver13

Guest
IKR! I got the atty from this really awesome guy I know. I had done a patina on this one before and I am sort of sorry I took it off as it was way cool. looked like an old world map. Need to see if I can find a picture of it
would love to see it
 

Tornadoalleydeb

Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Found it!



this was done with nothing more than water and a the extra strong polident tablet. I had read about using denture cleaner so figured I would give it a try. Psh, fail wrong picture lol. Let me try this again.



 

Tornadoalleydeb

Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
I should have left it alone. I bet I can never get that look again but that's okay. I may try it again someday. I do like the blues that came out this time. I need to put another coat of sealer on it.
 

Tornadoalleydeb

Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Oh! Okay, thanks for the tip I would not have thought to do it that many times but I will :)
 

VU Sponsors

Top