35 and 40 is a bigger difference. 36 and 38 is just one size wire. So I didnt know if it wud even matter. I was told 36 wud give more vapor. And 38 better flavor but the 36 gives just fine flavor and blows big clouds. I use the kennedy rda. I did a 6 wrap and it ohms out at .15.I notice difference fro. 35 to 40 but never used 38.id think it would be just a little better wicking
That would depend on the chamber I'd think. Not the ramp itself but the cool down time.I wouldn't think there would be much difference in just one wire size. There's a greater difference between 38ga and say 30 or 32ga. Ramp up definitely improves, but 36/38 are pretty similar.
If Google translate is accurate, you want to know how to build a coil that crackles loudly? If so, you can adjust the amount of cotton used to make it crackle more, just wick a little looser. Too loose and it starts spitting though. Other than that I don't know any tricks to make coils crackle more, maybe someone else will have an idea.[QUOTE = "Syythe ، النشر: 2487490 ، العضو: 129438"]
اعتدت على استخدام 38 لتغليف كلابتوناتي لكنني انتقلت إلى 40. بالنسبة لي ، كان هناك اختلاف ملحوظ في الزيادة. ليس ضخمًا ولكن ملحوظًا ، فأنا أستخدم فقط تعديلات mech squonk لذلك كان من الأسهل قليلاً معرفة ذلك ولكن في وضع منظم ، يمكنك أن تصطدم بالواط الخاص بك قليلاً لتعويض ذلك. لم أستطع معرفة الاختلاف الكبير في الغيوم أو النكهة على الرغم من أنها كانت متشابهة جدًا في هذا الجانب.
[/اقتبس]
الرجال كيفية بناء لفائف الغريبة 3 الأساسية التي تنتج صوت طقطقة قوي فرقعة
Sorry I got a problem with the automatic translationNeeds to be in English per forum rules. You can type it so please do so.
Sent from a pile of wood chips
Sorry I got a problem with the automatic translation
Thank you, bror, I made you tiredI fixed your first post with google translate and deleted the second since it was a quote.
@MrMeowgi is correct, you must use English.
Thank you.
I understand the amount of cotton is light "but someone says it in the outer core(outer D core) should be at a degree 94 angleIf Google translate is accurate, you want to know how to build a coil that crackles loudly? If so, you can adjust the amount of cotton used to make it crackle more, just wick a little looser. Too loose and it starts spitting though. Other than that I don't know any tricks to make coils crackle more, maybe someone else will have an idea.
If you very slightly understretch your decore and apply a very light amount of tension while aliening, you can decrease the angle by one or two degrees. It will be alien'd a tiny little bit tighter as a result, and the crackling will be louder.I understand the amount of cotton is light "but someone says it in the outer core(outer D core) should be at a degree 94 angle
You mean angle 87~90 or 90~95 ?If you very slightly understretch your decore and apply a very light amount of tension while aliening, you can decrease the angle by one or two degrees. It will be alien'd a tiny little bit tighter as a result, and the crackling will be louder.
92~93 degrees (measured on the drill side, not the swivel side)You mean angle 87~90 or 90~95 ?