Become a Patron!

Whats is the smallest high end reg. squonker?

Hello guys, I have a Rebel Vape DNA 75c 21700 squonker but it isn’t as compact as I wish It could be. What is a good recommendation for a high end 18650 squonker that’s extremely compact and comes with a DNA chip? I’ve looked into custom mod websites but none seem to offer a squonker version.
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
All good options thank you guys. I love the viscous Ant and the Stab wood mods listed on the above sites. Please continue to feed me more options if possible haha.
 

88ArDeN88

Gold Contributor
Member For 4 Years
All good options thank you guys. I love the viscous Ant and the Stab wood mods listed on the above sites. Please continue to feed me more options if possible haha.
I mean it's more middle of the range, but if you can get your hands on a Lost Vape Therion 75c BF it is pretty compact depending on the atty you put on there. About 3.5" tall and about 2" on the x axis, width wise is about 1". The only problem I have is the efficiency of the 75c chip is pretty poor so though you save on some space with the mod, be prepared to carry around at least one extra battery with you.
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
I mean it's more middle of the range, but if you can get your hands on a Lost Vape Therion 75c BF it is pretty compact depending on the atty you put on there. About 3.5" tall and about 2" on the x axis, width wise is about 1". The only problem I have is the efficiency of the 75c chip is pretty poor so though you save on some space with the mod, be prepared to carry around at least one extra battery with you.

I had one and found it to be a total PITA, while smaller than some DNA75C, it's because the design is convoluted and not user friendly IME

I do agree that the DNA75C battery life is crap, but he'd know that from having the Rebel
 

88ArDeN88

Gold Contributor
Member For 4 Years
I had one and found it to be a total PITA, while smaller than some DNA75C, it's because the design is convoluted and not user friendly IME

I do agree that the DNA75C battery life is crap, but he'd know that from having the Rebel
The battery door situation sucks. But other than that, it is set up just like every other 75c.
 

88ArDeN88

Gold Contributor
Member For 4 Years
It way sucks :poop: in that completely inconvenient compared to any other squonker I've ever owned, and I have over 50 and have probably had close to 70 (haven't ever included what I don't have in my counts)
Yah, having to take the squonk bottle out and the little plastic battery cover and then trying to get the battery into that small space was a foolish design especially when it could've easily been rectified by not angling off the corners on the display side and adding a removable contact or even a sliding door on the bottom.
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Yah, having to take the squonk bottle out and the little plastic battery cover and then trying to get the battery into that small space was a foolish design especially when it could've easily been rectified by not angling off the corners on the display side and adding a removable contact or even a sliding door on the bottom.

For some, it would not be a deal killer, it was for me though, that and the battery life
 

~Don~

Platinum Contributor
Member For 5 Years
I enjoyed my Palm DNA75 when I had it... most comfortable squonker owned. They have the 75C versions also, but they aren't cheap.

You have the Effimera and Indomita from Stranger mods... but again, they aren't cheap.

Cobra and Venom from Hellfire... yup you guessed it... not cheap in the slightest...

Armor Mech Squonker - Yup...not cheap lol


But when you start looking at HIGH END... things start to get hazy... When you say, wow, ok, so that's what $850 looks like in my mouth LOL


Much more out there than what I mentioned... but I get a great vape with my Cloned Dvarw MTL RTA on a Pico 75w and it really vapes no differently than my Authentic Dvarw MTL on my Dicodes Dani Mini ;)
 

88ArDeN88

Gold Contributor
Member For 4 Years
For some, it would not be a deal killer, it was for me though, that and the battery life
If it was my "main" mod, it would've been a deal killer for sure. I mostly use it with the profile rda now with SS mesh and the battery life is improved significantly by using under 50w. To the OP Point, if you are looking to save space and aren't really concerned about much else, it is a viable option.
 

Syythe

Silver Contributor
Member For 4 Years
ECF Refugee
If your looking for small DNA squonkers, the Snitch v2 is about as little as they get. As with other suggestions here, it's not cheap.
 

Syythe

Silver Contributor
Member For 4 Years
ECF Refugee
Armor Mech Squonker - Yup...not cheap lol

If we are mentioning mechs, the Anchor Nano is tiny. Noticably smaller than the Armor. The nano comes in at 72x42x24mm. There may be a smaller 18650 squonker somewhere, but I have not seen one that is smaller than the nano yet.
 

~Don~

Platinum Contributor
Member For 5 Years
If we are mentioning mechs, the Anchor Nano is tiny. Noticably smaller than the Armor. The nano comes in at 72x42x24mm. There may be a smaller 18650 squonker somewhere, but I have not seen one that is smaller than the nano yet.

Yeah I let that one slip... I wasn't paying much attention to the whole DNA thing when I typed that out lol
 

SteelDriver

Gold Contributor
Member For 4 Years
Box Mod Mafia this is the tiny dual 18650 250c.
762c6841ab37c73a5db8e4c5673f8569.jpg
d9c5c5020d0e83ef437a2ffe0bab8510.jpg
 

pulsevape

Diamond Contributor
Member For 4 Years
I enjoyed my Palm DNA75 when I had it... most comfortable squonker owned. They have the 75C versions also, but they aren't cheap.

You have the Effimera and Indomita from Stranger mods... but again, they aren't cheap.

Cobra and Venom from Hellfire... yup you guessed it... not cheap in the slightest...

Armor Mech Squonker - Yup...not cheap lol


But when you start looking at HIGH END... things start to get hazy... When you say, wow, ok, so that's what $850 looks like in my mouth LOL


Much more out there than what I mentioned... but I get a great vape with my Cloned Dvarw MTL RTA on a Pico 75w and it really vapes no differently than my Authentic Dvarw MTL on my Dicodes Dani Mini ;)
it ain't cheap.....it seems "high end" has become a license to steal...there used to be a time when you said "high end" and you'd put out 200 0r 300 dollars...now that won't buy you in the front door in the "high end" world anymore. some of the prices I've seen are insane. I know the mods are probablly worth the price they are asking for, but it seems the middle ground is disapering...used to be your choice was you pay 25.00 or you pay 200.00...now it seems your coice is either 25.00 or 600.00.
 
Last edited:
Thanks for all the input guys, hopefully this thread can also help someone else in the future. I haven’t made the purchase yet but I really like the Viscious Ant Spade so far. It has a really awesome new feature with the squonk bottles where you just slide them in.
 

DogMan

VU Donator
Diamond Contributor
Member For 5 Years
SVA punto75 is tiny, i had one

Big Apple Mods do a mini now, called the BAMbino, but the modder got a new job, so runs of mods have blown out to 6 months+

NoName NoFckGiven is also tiny, and only around 300 euros
 

Syythe

Silver Contributor
Member For 4 Years
ECF Refugee
Thanks for all the input guys, hopefully this thread can also help someone else in the future. I haven’t made the purchase yet but I really like the Viscious Ant Spade so far. It has a really awesome new feature with the squonk bottles where you just slide them in.
The spade is a great mod. I have not used a regulated version, but own some of their mechs. The bottle is my favorite squonk bottle to date, easy to fill and easy to install with no leaks. The build quality is excellent. I have both the aluminum frame and the hybrid stabwood frame and they are both top notch.
 

SteelDriver

Gold Contributor
Member For 4 Years
EVC Mods & E-Liquid on fb. Easy to get made in the USA Michigan. Bmm are hard to get its secret fb group so someone has to invite you. And then get spot once a month 30 mods a month. But also USA New Mexico exelellent customer service in both. No messing with over seas cs.

Sent from my LG-D850 using Tapatalk
 

VU Sponsors

Top